I worked in roped access back in the 90s (it was stop and shunt in those days, IRATA) and we only used figure 8 on cowstail (and fig 9 + butterfly hitch, or bunny knots for rigging. Never scaffold) because you couldn't get it wrong and easy to check. A big elastic band keeps the carabineer tight on cowstail. The term "Cow's tail" comes from French (queue de vache) and cavers like Ferdinand Petzl
I love your testing and enjoying your presentation. In this video you demonstrated tying a triple overhand noose knot. A scaffold or double overhand noose knot only has two parallel bands of rope. Yours has three parallel bands. Look at Mikey’s knots that he holds up and you will only see two parallel bands of rope around the main rope.
the death in death knot for me is not "will the knot kill you", it's more "the lack of awareness and competence will.." keep up the channel guys, it's great.
The Scaffold Knot IS a type of noose. It's not a simple noose, and it's not a hangman's noose, but any loop knot which tightens when the standing end is pulled is a form of noose. (The Noose, or simple noose, has only a single overhand, a la the single Fisherman's knot).
@@russelltalker Running knots are a subset. Specifically, they're knots formed by tying a fixed loop loosely around the standing part. Nooses that aren't running knots can be thought of as sliding hitches tied around the standing part.
@@PeregrineBF That makes perfect sense. I stand corrected. In my defense though several sites do seem to refer to common noose knots as running knots. Wikipedia even has a category page on running knots which includes these. And Ashley's book of knots doesn't seem to define a running knot other than the instance of the running bowline. But if there are loops which tighten and loops which are fixed then a noose is indeed is a sliding loop where the rope is hitched around its standing part and a running knot is a fixed loop tied around its standing part.
@@russelltalker Not quite what I meant. Running knots are nooses, but not every noose is a running knot. Just like how all bicycles are vehicles, but not every vehicle is a bycicle.
@@russelltalker yeah i know im late to the party but this is just getting into semantics at this point because a running bowline would definetly work as a noose
In RA we typically only do 2 wraps whereas you tested with 3 wraps. Curious how the death knot would fair with only 2 wraps. Thanks for the interesting content.
I'm a professional tree climber which is somewhere between rope access and rope soloing. Been a fan of the channel for a while thanks for the content. I use the anchor bend for terminating my lines on carabiners, any chance you can or maybe already have tested this knot. Also requesting anything else from the arborist rope access side you could test would be interesting i.e. sheet bend and double sheet bend, or Yosemite bowline vs bowline vs double fisherman. Thanks
I'm very excited to see this one redone on the drop tower! It might take a few tries to get one that doesn't cinch up, but I think you might get a pull though.
You should try the death knot with only 3" of tail on the end. No one works with 2' of tail hanging out of their knot. There may be a slighy different outcome because it looks like the tail is getting shorter as you pull on it until the is until the wraps cinch down on it. Rope access program manager here.
I can imagine that some knots may be more vulnerable to very quick and high loads (as in a fall). In the test of the death knot it was quite clear that the slow pull made the knot tighten up and squeeze the tail so it couldn't go through, maybe in a fall situation there would be a different outcome, especially if it isn't very tight to start with.
I was thinking the same thing, I'd love to see this tested with different lubricants, or even mud. Is there any static coefficient of friction low enough that this would slip through?
The danger of the "death" knot comes from it's use as a positional strop. They don't get loaded up properly so the knot never sinches down especially on tougher/older or static rope. In rope access the equipment shouldn't experience fall forces like rock climbing so it works its way out and when you do load it it's only with body weight.
if you add a stoper knot on the other side of the death knot then you efectivly making a double fisherman loop knot. it could be nice to try it vs figure 8 knot
Can you guys test a “home made” Kong Slyde style adjustable PAS? With a recommended 9mm dynamic rope? (Triple rated ideally, which most people try to use)
Found this super interesting! I've been using the scaffold knot for over 10 years, mainly as a cow tail and often been questioned about it's strength and reliability.
I used to rely on Scaffold Knot + 2or 3 extra wraps around for extra shock absorption, but a rigger pointed out that the bend radius of the 12mm cow's tail I'm using with the carabiner is seriously loading the knot which could lead to failure so I'm now advocating for the use of thimbles at the end of each cow's tail.
At 71, I'm not a climber, but I love to study knots, especially to understand how their internal structure affects their ultimate strength. Hence, I LOVE YOUR VIDEOS. You are, (or have), a very good camera operator/director/editor! The live close-ups of the tests show all the interesting parts of each, and your comments are always to the point. (By the way, when you said, "I'm just making you dizzy," while fussing with the camera, I had to laugh... because you WERE!) Anyway, here's my two cents. Since you seem, here, to be getting a lot of rope breaks AT the carabiner, then maybe using TWO-LOOPS around the carabiner would reduce the stress on the rope at that point, (kind of like the double loops in an anchor bend). Frankly, I think it's instructive that the sharp "nip" that a rope makes, around a carabiner, represents its OWN weak point, regardless of the knot being tested. Anyway, great video. Please keep 'em coming!
I call that a triple fishermans knot. I do a varient called the double fishermans with only 2 raps instead of 3. It's like the reef knot where people call it different things.
We use them a lot in rope rescue to save room compared to a larger profile knot like a figure 8. A good example is the bridals attached to a stokes basket
Great Video guys, I have been watching how not to highline for a long time now and learned a ton from them. I have been watching Mikeys videos from the beginning and learned a ton as well. My brother loved working with Mikey. Would you be open to testing some of the anchors I use for temporary access?
Like your channel. Four thoughts: 1. If I understood correctly you used static rope. Wondering how dynamic rope would fair in same tests, especially as climbers would typically use a dynamic rope to reduce forces on the belay and on the individual (not that they use cow's tails much at all, if ever, nor the scaffold knot, at least to-date 2021). 2. It might be worth showing what happens to your 'death' version of the scaffold knot under a drop test. Though a part of me thinks, that while tests like this are interesting they may give some people the wrong idea! 3. It might be worth explaining that 'getting lucky' with the death knot is, in part, do to enthusiastically tightening the knot beforehand and then slowly loading it. An accident is more likely to happen when an individual mis-ties the scaffold knot and not notice, in this scenario they probably won't have hand tightened it to such an extent, thinking it not necessary. 4. It might be worth explaining the difference between your death knot in relation to the scaffold knot and the European death knot (as you know, an overhand knot variant, used by many, to abseil). Hope useful. Be safe.
It is called a scaffold knot because it it refers to a hangman's scaffold. So, you werent wrong, it is still used as a noose, it is just not the same as a noose knot.
Neat, thanks! Very cool to watch the knot slipping and the rope tightening around itself. I'd be interested to know more about tail length. You guys generally use huge tails(by my standards) in your testing. In most climbing, I try to minimise stuff hanging and flopping about, specifically tails. Any scenarios anybody can come up with where we can say how short of a tail is too short, in various scenarios?
As much as I appreciate and rely on your content, brother, the "eight" which you show at 8:30 is about the grossest abomination I've ever seen, and would earn ANY of my students a big FLAG.
Hey Ryan, fascinating videos, love them. Just wanted to say that a couple of 3-4 foot pieces of plexiglass sections hinged in the back (think top loading washing machine) and you would have a pretty cheap, easy, relatively safe gaurd/shield. Just a thought. Keep the content coming and be safe. .
Just a guess, but I'm thinking it has the name cowtail simply from appearance. Cows have skinny tails with hair tufts at the end mimicking the rope and carabiner, that can basically spin around 360° and swat flies.
I would like to see a water knot break tested in climbing webbing and an over hand with a second back up over hand break tested. I make top rope anchors on trees with webbing and I would like to know what the best way to create a loop in webbing is.
Can use the Death knot as a stopper knot with a quick release. Come down on the long tail, if you do hit the stop, it just gets tighter. After you're done, pull the short tail and it comes out. Can throw a biner in the loop just in case, but make sure people know it's not an attachment point.
This is an awesome test very interesting was wondering if you could test the double fisherman's version versus the triple fisherman's version that you showed in the video to see which one is stronger
I read a paper that said the scaffold hitch had better fall absorbing properties than the figure eight. This has enlightened me that it doesn't mean it's stronger.
Heya, I'm sure this is somewhere in the comments, but in Rope Access it's unlikely to have such a long tail below the knot. Generally it's taught that one fistlength or 10cm is the appropriate length of tail coming out of a knot when placed at the end of a rope. This may vary between different certifications, but I'm speaking as a level 3 SPRAT certified tech working out of Canada. I think with a shorter tail coming out, it's much more likely that the "Death Knot" may actually not have enough slack to tighten up the knot, and would come undone as a result. Especially if the knots were not dressed as tightly, which of course is extremely bad practice, but definitely a factor! Regardless, the results here were very interesting, and not at all what I expected to see! Also, big fan of the channel. (:
When you follow a figure 8 through, the loaded line needs to be towards the centre of the knot, this way when you load it, it stays dressed, and is easier to undo
The way to achieve this is to start following back through on the other side of the followed rope than you usually do (since we know that you are doing it the other way currently). I'm not sure if this is true for both left and right hand versions or which version I usually tie, but for me, when starting to trace back instead of aiming at the big obvious hole in the first loop, I push the existing line into that space and thread the follow rope in the space created by pushing the other strand, in between it and the loop (this is the last step for the way you are currently tying it).
You're not entirely wrong in calling it a noose, it's a kind of noose, just not The Noose. In the noose chapter in The Ashley Book of Knots he says: "A Noose or snare, sometimes called a Running Knot, is a variety of Loop Knot that is tied in hand, and, when placed around an object, renders and constricts when the rope is pulled on" And the Scofhold Knot is in that chapter.
I really don’t think it makes a difference. I’ve done a handful of tests with the leash ring projects. They are all hard to untie either way and all hold.
I am NOT a climber, nor involved with rope access in any way. I am, however, a retired Army Combat Medic. Question for you....because I have NO idea, would it be prudent to tie a stopper knot on the "tag end"? Obviously, there's no substitute for doing it properly. thanks
Hi mate, I am an arborist and I use the scaffold with 4 reps, on my ropes. I'm interesting about does it make it stronger if you tie with more reps on it. It's really hard to tight it into the carabiner with 4 reps.
We call it a barrel knot in the uk I’ve never had any issues with it or ever heard of any issues with it when used on cows tails. when you tie your new set of cows tails you always weight the knot as part of the tying process so the cows tails don’t change length on the first use
It's a scaffold knot mate. I usese them every day at work with my cowtails and safety for tools. A barrel knot is just a knot in a line, like a stopper knot.
As an arborist, I call that knot a doublefishermans knot. I use it to mke my own eye to eye prussik cords on my wirecore strops (workpositioning lanyard)
This is the best type of episode. You take a practice (No Death Knots) that seems like common sense which rope access policy is based on and honestly it does not hold up to testing! The test shows the death knot is very safe for human loads. I am still not going to use it and this is great to know!
This is why I wanted to test these. I wanted to be dis-proved. I have been in the industry for 11 years and was always told this and the other thing. However, Always asked why or why not. Sadly Level 3s hate when Level 1s ask those kinds of questions. Cheers Mikey
OK, to us laymen, if a body were to fall far enough to reach max speed which generally wouldn't happen in a fall. How many Kn does it take to break either a proper knot or the rope itself?
Dont see the point.. I work in ropeaccess but only use it when i want to orient the biners in a fixed way or need to gett as close to the ancor as posible.
To add to what Niklas said. One the knot tightens down on whatever its going around... It can almost be impossible to untie. So, I cant see it being worth it.
I think the problem with all the variations of this knot, and off most knots I think, is not the breaking strength, but how easily they come undone when you are climbing with them and moving them around.
Just a thought... if you don’t pull it to max and actually pull the death knot at a consistent 1kn to 1.5kn would it come undone? On a personal anchor that’s all the force that will be on it. 20kn is not a force the death knot will ever see?
This got me thinking... could the death knot with a stopper knot on the end of a long tail be used as an energy absorber? Also I'd love to see the zeppelin bend in th slack snap rig.
Cows tail may come from bull boats? When the skin of a cow was used to make a coracle, the tail was left attached to the skin to use for tying boats together or to a mooring. Could be. Maybe not. No googling here! Just a thought.
It would probably kill you (death knot) in rope access the first time you lean out to do work, please be careful out there. I've been in RA since early 2008 and want to keep doing the job I love safely 👍🏾😎 Pro tip from a friend, for your cow's tails tie them up and clip in on the ground pulling tight (body weight) on the scaf knots to seat them properly 💯
It would be great if you could test it with a shock load test.. every ropes texture is different, some smooth, n some not.. also its size would play a role.. so doubt any of these results shouldn't be taken as a general rule..
Scaffold knot is in the noose chapter of the ABOK, p203. So kinda right? Thanks for testing the scaffold ( ABOK #1120 ). Would enjoy seeing how it compares to the gallows knot variation ( ABOK #1121) ABOK = Ashley Book Of Knots
@@eyescreamcake hangman’s looks like it’s tied a little differently though. Instead of a 7 turn toward the top bight, it looks like it is tied toward the bottom with the tail exiting out that way and not back through the wraps
I'm pretty sure you're using the terms scaffold knot and poachers knot interchangeably, but they are different. The scaffold knot is a triple overhand loop, and the poachers a double overhand.
Why it’s a death knot is there is a way to tie the scaffold by pushing a loop through, you just have to make sure it’s from the load side. Easily mixed up.
I was just thinking I was gonna mention the forces involved here and how dangerous those projectiles could be… but this guy ties himself to mountains and jumps of so 🤷♂️
even though it doesnt make sense to use death knots (due to potential problems with shock loading) but couldnt you just tie a stopper knot at the end of your tail and not have to worry about it accidentally slipping through?
Thank you Mikey for the collab - Go subscribe to him at th-cam.com/channels/MRCmuFd696u78hyLkF9X_w.html
Check out our new store! hownot2.store/
I worked in roped access back in the 90s (it was stop and shunt in those days, IRATA) and we only used figure 8 on cowstail (and fig 9 + butterfly hitch, or bunny knots for rigging. Never scaffold) because you couldn't get it wrong and easy to check. A big elastic band keeps the carabineer tight on cowstail. The term "Cow's tail" comes from French (queue de vache) and cavers like Ferdinand Petzl
I love your testing and enjoying your presentation. In this video you demonstrated tying a triple overhand noose knot. A scaffold or double overhand noose knot only has two parallel bands of rope. Yours has three parallel bands. Look at Mikey’s knots that he holds up and you will only see two parallel bands of rope around the main rope.
I'm doing rope access right now and a lot has stayed the same! Although figure 8 is considered just as good as 9 on anchors now.
Keep expanding towards rope access community, it will grow your audience. Also expand to audiences and snap their shit too.
bro i just sit at home 24/7 and I'm addicted to this channel
the death in death knot for me is not "will the knot kill you", it's more "the lack of awareness and competence will.."
keep up the channel guys, it's great.
The Scaffold Knot IS a type of noose. It's not a simple noose, and it's not a hangman's noose, but any loop knot which tightens when the standing end is pulled is a form of noose. (The Noose, or simple noose, has only a single overhand, a la the single Fisherman's knot).
Yes and alternatively noose knots are called running knots. Such as a running bowline.
@@russelltalker Running knots are a subset. Specifically, they're knots formed by tying a fixed loop loosely around the standing part. Nooses that aren't running knots can be thought of as sliding hitches tied around the standing part.
@@PeregrineBF That makes perfect sense. I stand corrected.
In my defense though several sites do seem to refer to common noose knots as running knots. Wikipedia even has a category page on running knots which includes these. And Ashley's book of knots doesn't seem to define a running knot other than the instance of the running bowline.
But if there are loops which tighten and loops which are fixed then a noose is indeed is a sliding loop where the rope is hitched around its standing part and a running knot is a fixed loop tied around its standing part.
@@russelltalker Not quite what I meant. Running knots are nooses, but not every noose is a running knot. Just like how all bicycles are vehicles, but not every vehicle is a bycicle.
@@russelltalker yeah i know im late to the party but this is just getting into semantics at this point because a running bowline would definetly work as a noose
In RA we typically only do 2 wraps whereas you tested with 3 wraps. Curious how the death knot would fair with only 2 wraps. Thanks for the interesting content.
@Flying C Land double overhand noose as well
I'm a professional tree climber which is somewhere between rope access and rope soloing. Been a fan of the channel for a while thanks for the content. I use the anchor bend for terminating my lines on carabiners, any chance you can or maybe already have tested this knot. Also requesting anything else from the arborist rope access side you could test would be interesting i.e. sheet bend and double sheet bend, or Yosemite bowline vs bowline vs double fisherman. Thanks
The Anchor Bend is my choice, as well...
I'm very excited to see this one redone on the drop tower! It might take a few tries to get one that doesn't cinch up, but I think you might get a pull though.
Seconded^^^
You should try the death knot with only 3" of tail on the end. No one works with 2' of tail hanging out of their knot. There may be a slighy different outcome because it looks like the tail is getting shorter as you pull on it until the is until the wraps cinch down on it. Rope access program manager here.
Would love to see the death knot on the drop tower to see what the shock loading does! Wonderful video as always.
"Get a guard protection, Ryan!" - Ryan
+100. Eye protection at least. Dust/Fragments can fly at very high speeds.
I can imagine that some knots may be more vulnerable to very quick and high loads (as in a fall). In the test of the death knot it was quite clear that the slow pull made the knot tighten up and squeeze the tail so it couldn't go through, maybe in a fall situation there would be a different outcome, especially if it isn't very tight to start with.
I was thinking the same thing, I'd love to see this tested with different lubricants, or even mud. Is there any static coefficient of friction low enough that this would slip through?
The danger of the "death" knot comes from it's use as a positional strop. They don't get loaded up properly so the knot never sinches down especially on tougher/older or static rope. In rope access the equipment shouldn't experience fall forces like rock climbing so it works its way out and when you do load it it's only with body weight.
Great tip I use that knot daily in tree climbing, tree work in general super easy to mess up thank you shining light on this
The proper scaffold knot is a badass knot. This definitely improves my head game.
"Caving industry"
Can't help but crack up at that...
Yeah, I wondered too. Maybe they are finding diamonds down there and they don’t tell us about it? 😁
if you add a stoper knot on the other side of the death knot then you efectivly making a double fisherman loop knot. it could be nice to try it vs figure 8 knot
That would represent a Double overhand on a bight…though he is tying a triple overhand so, a Triple overhand on a bight.
Can you guys test a “home made” Kong Slyde style adjustable PAS? With a recommended 9mm dynamic rope? (Triple rated ideally, which most people try to use)
I use the scaff knot both in caving and RA, so it's great to see what they're capable of.
Great video, very informative. Keep up the good work
Found this super interesting! I've been using the scaffold knot for over 10 years, mainly as a cow tail and often been questioned about it's strength and reliability.
I used to rely on Scaffold Knot + 2or 3 extra wraps around for extra shock absorption, but a rigger pointed out that the bend radius of the 12mm cow's tail I'm using with the carabiner is seriously loading the knot which could lead to failure so I'm now advocating for the use of thimbles at the end of each cow's tail.
Happy to see my boy Mikey up there!
At 71, I'm not a climber, but I love to study knots, especially to understand how their internal structure affects their ultimate strength. Hence, I LOVE YOUR VIDEOS.
You are, (or have), a very good camera operator/director/editor! The live close-ups of the tests show all the interesting parts of each, and your comments are always to the point. (By the way, when you said, "I'm just making you dizzy," while fussing with the camera, I had to laugh... because you WERE!)
Anyway, here's my two cents. Since you seem, here, to be getting a lot of rope breaks AT the carabiner, then maybe using TWO-LOOPS around the carabiner would reduce the stress on the rope at that point, (kind of like the double loops in an anchor bend).
Frankly, I think it's instructive that the sharp "nip" that a rope makes, around a carabiner, represents its OWN weak point, regardless of the knot being tested.
Anyway, great video. Please keep 'em coming!
I call that a triple fishermans knot. I do a varient called the double fishermans with only 2 raps instead of 3. It's like the reef knot where people call it different things.
The fisherman's wether loop or bend is typically two counter overhand (single-triple) ABOK 1038, 1143, 1414, 1415
I like how rope access and caving are both _industries,_ but slacklining and highlining are both just _communities._
We use them a lot in rope rescue to save room compared to a larger profile knot like a figure 8. A good example is the bridals attached to a stokes basket
I am a big fan of these tests.
Great Video guys, I have been watching how not to highline for a long time now and learned a ton from them. I have been watching Mikeys videos from the beginning and learned a ton as well. My brother loved working with Mikey. Would you be open to testing some of the anchors I use for temporary access?
Like your channel. Four thoughts:
1. If I understood correctly you used static rope. Wondering how dynamic rope would fair in same tests, especially as climbers would typically use a dynamic rope to reduce forces on the belay and on the individual (not that they use cow's tails much at all, if ever, nor the scaffold knot, at least to-date 2021).
2. It might be worth showing what happens to your 'death' version of the scaffold knot under a drop test. Though a part of me thinks, that while tests like this are interesting they may give some people the wrong idea!
3. It might be worth explaining that 'getting lucky' with the death knot is, in part, do to enthusiastically tightening the knot beforehand and then slowly loading it. An accident is more likely to happen when an individual mis-ties the scaffold knot and not notice, in this scenario they probably won't have hand tightened it to such an extent, thinking it not necessary.
4. It might be worth explaining the difference between your death knot in relation to the scaffold knot and the European death knot (as you know, an overhand knot variant, used by many, to abseil).
Hope useful. Be safe.
It is called a scaffold knot because it it refers to a hangman's scaffold. So, you werent wrong, it is still used as a noose, it is just not the same as a noose knot.
I just find it funny that since getting back from caving your videos seemed to appear on my recommended
Thank you for another great video!
When you are doing your tests, can you please say the brand of the rope and what its rated for?
One for the algorithm; cheers Ryan
Much appreciated video from a long time viewer of both you guys!! -IRATA tech in Ontario
Neat, thanks! Very cool to watch the knot slipping and the rope tightening around itself. I'd be interested to know more about tail length. You guys generally use huge tails(by my standards) in your testing. In most climbing, I try to minimise stuff hanging and flopping about, specifically tails. Any scenarios anybody can come up with where we can say how short of a tail is too short, in various scenarios?
Please test a Prucell Prusik, it's a common use of personal anchor, I believe the most common it's using 6mm cordelette.
best Regards!
As much as I appreciate and rely on your content, brother, the "eight" which you show at 8:30 is about the grossest abomination I've ever seen, and would earn ANY of my students a big FLAG.
Hey Ryan, fascinating videos, love them. Just wanted to say that a couple of 3-4 foot pieces of plexiglass sections hinged in the back (think top loading washing machine) and you would have a pretty cheap, easy, relatively safe gaurd/shield. Just a thought. Keep the content coming and be safe. .
Just a guess, but I'm thinking it has the name cowtail simply from appearance. Cows have skinny tails with hair tufts at the end mimicking the rope and carabiner, that can basically spin around 360° and swat flies.
I would like to see a water knot break tested in climbing webbing and an over hand with a second back up over hand break tested. I make top rope anchors on trees with webbing and I would like to know what the best way to create a loop in webbing is.
I wonder if the death knot would come undone under repeated cycles of light loading.
Can use the Death knot as a stopper knot with a quick release. Come down on the long tail, if you do hit the stop, it just gets tighter. After you're done, pull the short tail and it comes out. Can throw a biner in the loop just in case, but make sure people know it's not an attachment point.
This is an awesome test very interesting was wondering if you could test the double fisherman's version versus the triple fisherman's version that you showed in the video to see which one is stronger
I read a paper that said the scaffold hitch had better fall absorbing properties than the figure eight. This has enlightened me that it doesn't mean it's stronger.
These are two different things. ;)
Very nice - you've cleared up a few things. Have you ever tested the Double Bulin for traction?
Heya, I'm sure this is somewhere in the comments, but in Rope Access it's unlikely to have such a long tail below the knot. Generally it's taught that one fistlength or 10cm is the appropriate length of tail coming out of a knot when placed at the end of a rope. This may vary between different certifications, but I'm speaking as a level 3 SPRAT certified tech working out of Canada. I think with a shorter tail coming out, it's much more likely that the "Death Knot" may actually not have enough slack to tighten up the knot, and would come undone as a result. Especially if the knots were not dressed as tightly, which of course is extremely bad practice, but definitely a factor!
Regardless, the results here were very interesting, and not at all what I expected to see! Also, big fan of the channel. (:
Great view of the knots being tied
When you follow a figure 8 through, the loaded line needs to be towards the centre of the knot, this way when you load it, it stays dressed, and is easier to undo
The way to achieve this is to start following back through on the other side of the followed rope than you usually do (since we know that you are doing it the other way currently).
I'm not sure if this is true for both left and right hand versions or which version I usually tie, but for me, when starting to trace back instead of aiming at the big obvious hole in the first loop, I push the existing line into that space and thread the follow rope in the space created by pushing the other strand, in between it and the loop (this is the last step for the way you are currently tying it).
@@TheQuicksilver115 exactly.
Holy shit! Mikey taught me my IRATA in AB Canada. That dude is awesome!
You're not entirely wrong in calling it a noose, it's a kind of noose, just not The Noose. In the noose chapter in The Ashley Book of Knots he says:
"A Noose or snare, sometimes called a Running Knot, is a variety of Loop Knot that is tied in hand, and, when placed around an object, renders and constricts when the rope is pulled on"
And the Scofhold Knot is in that chapter.
Let's go! 2 loop-arounds vs 3 loop-arounds?
13
I really don’t think it makes a difference. I’ve done a handful of tests with the leash ring projects. They are all hard to untie either way and all hold.
So is there a difference between a shock load test vs slow pull? Nice vid!
We will have to wait and see...
Do this do that. Happy to help your digits
Just comment for the algorithm!! Nice videos
I am NOT a climber, nor involved with rope access in any way. I am, however, a retired Army Combat Medic. Question for you....because I have NO idea, would it be prudent to tie a stopper knot on the "tag end"? Obviously, there's no substitute for doing it properly. thanks
I think the rope thickness and type might change the outcome too. Would be interested to find out.
Hi mate, I am an arborist and I use the scaffold with 4 reps, on my ropes. I'm interesting about does it make it stronger if you tie with more reps on it. It's really hard to tight it into the carabiner with 4 reps.
We call it a barrel knot in the uk I’ve never had any issues with it or ever heard of any issues with it when used on cows tails. when you tie your new set of cows tails you always weight the knot as part of the tying process so the cows tails don’t change length on the first use
It's a scaffold knot mate. I usese them every day at work with my cowtails and safety for tools. A barrel knot is just a knot in a line, like a stopper knot.
Would like to see how the knots behave in a shock loaded situation. As in bouncing down when descending.
As an arborist, I call that knot a doublefishermans knot. I use it to mke my own eye to eye prussik cords on my wirecore strops (workpositioning lanyard)
Also, I tie it with just two wraps around and then through.
Please test this in the droptower. What about a deathknot with a stopper on the tail for an adjustable lanyard or extra shockload protection?
This is the best type of episode. You take a practice (No Death Knots) that seems like common sense which rope access policy is based on and honestly it does not hold up to testing! The test shows the death knot is very safe for human loads. I am still not going to use it and this is great to know!
This is why I wanted to test these. I wanted to be dis-proved. I have been in the industry for 11 years and was always told this and the other thing. However, Always asked why or why not. Sadly Level 3s hate when Level 1s ask those kinds of questions.
Cheers Mikey
Are Palomar knots ever used in rope access or highline stuff?
What about shock load. Will it untie with quick , sharpe loading?
I don't even climb. But somehow love this channel
How about a two wraps scaffolding knot, instead of three? Does it steel hold?
Interesting! Agree, a good drop tower repeat perhaps
Have you guys tested the Double Dragon Loop knot? I believe it to be one of the strongest knots.
OK, to us laymen, if a body were to fall far enough to reach max speed which generally wouldn't happen in a fall. How many Kn does it take to break either a proper knot or the rope itself?
Would you ever consider using the scaffold knot to setup a single fixed line slung around something? I think it's kind of neat and easy to set up
Dont see the point.. I work in ropeaccess but only use it when i want to orient the biners in a fixed way or need to gett as close to the ancor as posible.
To add to what Niklas said. One the knot tightens down on whatever its going around... It can almost be impossible to untie. So, I cant see it being worth it.
Try soaking the rope in water, pulling standard tight and using a rope with a finer outer sheath weave. Or just water and standard tight maybe???
Is bend radius a factor in death knot not failing? What if the death knot was tied on a leash ring?
I think the problem with all the variations of this knot, and off most knots I think, is not the breaking strength, but how easily they come undone when you are climbing with them and moving them around.
They are not after you weight them like once - used them for some time.
Just a thought... if you don’t pull it to max and actually pull the death knot at a consistent 1kn to 1.5kn would it come undone? On a personal anchor that’s all the force that will be on it. 20kn is not a force the death knot will ever see?
Nice shirt man!
Awesome info as always
This got me thinking... could the death knot with a stopper knot on the end of a long tail be used as an energy absorber?
Also I'd love to see the zeppelin bend in th slack snap rig.
How about a death knot with a stopper knot on the tail? Kinda nice to have a loop on the end that doesn't sinch down for some uses
Cows tail may come from bull boats? When the skin of a cow was used to make a coracle, the tail was left attached to the skin to use for tying boats together or to a mooring.
Could be. Maybe not. No googling here! Just a thought.
Could you do a test of the zeppelin bend vs a double fisherman knot for joining two ropes?
We are finishing up a episode that includes those two bends. should be out in the next month or so.
It would probably kill you (death knot) in rope access the first time you lean out to do work, please be careful out there. I've been in RA since early 2008 and want to keep doing the job I love safely 👍🏾😎 Pro tip from a friend, for your cow's tails tie them up and clip in on the ground pulling tight (body weight) on the scaf knots to seat them properly 💯
It would be great if you could test it with a shock load test.. every ropes texture is different, some smooth, n some not.. also its size would play a role.. so doubt any of these results shouldn't be taken as a general rule..
Scaffold knot is in the noose chapter of the ABOK, p203. So kinda right? Thanks for testing the scaffold ( ABOK #1120 ). Would enjoy seeing how it compares to the gallows knot variation ( ABOK #1121)
ABOK = Ashley Book Of Knots
Useful as ever, thanks!
FYI. At 2:24 that is not a fisherman's knot. That is a triple overhand. A fisherman's "bend" is used to tie two ropes together.
Aside from the number of wraps, what's the difference between a scaffold knot and a noose?
A scaffold knot is a type of noose. There are other knots that are nooses, too, like the hangman's knot or the figure-eight noose.
@@eyescreamcake So then why the emphasis on the correction?
@@jarodlojeck5150 Someone told him wrong
@@eyescreamcake hangman’s looks like it’s tied a little differently though. Instead of a 7 turn toward the top bight, it looks like it is tied toward the bottom with the tail exiting out that way and not back through the wraps
I'm pretty sure you're using the terms scaffold knot and poachers knot interchangeably, but they are different. The scaffold knot is a triple overhand loop, and the poachers a double overhand.
Why it’s a death knot is there is a way to tie the scaffold by pushing a loop through, you just have to make sure it’s from the load side. Easily mixed up.
So a double/tripper stopper knot- on a bight?
I was just thinking I was gonna mention the forces involved here and how dangerous those projectiles could be… but this guy ties himself to mountains and jumps of so 🤷♂️
Yikes! Maybe put that ending somewhere in the beginning? Great video though, probably one of the more interesting data wise.
The most precarious part of this vid is making sure that no one can refer to it as the reason they used a 'death knot' 😂
That's the same reason why there are no bad experience reports and reviews about skydiving ☠
Nice notice at the end. U r saving urself haha
even though it doesnt make sense to use death knots (due to potential problems with shock loading) but couldnt you just tie a stopper knot at the end of your tail and not have to worry about it accidentally slipping through?
So there is more than one "death knot"? I thought this was going to be on the European Death Knot / the over hand bend...
EDK has been done
Thanks for the wonderful free subscription prize.
climbing/rope access really is all about mastering friction...
tip: but the OTBT (Object-To-Be-Tested) on the fixed side of the test rig. Than it does not wander out of frame....
Ryan
Ryan
Ryan
Just LOVE your videos msn!
On via ferratas you are told NEVER to use a static rope to protect yourself...what is different in caves?