DIY 70200mAh Power Bank Wireless Fast Charging QC3.0 6 Port
ฝัง
- เผยแพร่เมื่อ 8 ต.ค. 2022
- How to DIY 70200mAh Power Bank Wireless Fast Charging QC3.0 6 Port
- I Am using
+ 15w Wireless Charger Module + Type C
+ 27pcs 18650 2600mAh battery
+ 6-35volt 4 Port QC 3.0 Fast Charging Circuit Board
+ Samsung note 20 Ultra 5G box
+ 3S 12.6V 40A Lithium Battery Protection Board with Balance Charging
+ 3S 12.6v Meter Lithium Li-po Battery
Thanks for watching, Have a great day ! - แนวปฏิบัติและการใช้ชีวิต
Love from bangladesh🇧🇩🤗
Vai apni o onar video dekhen
@@bd0118
Me from 2016
BRICKS
@@geyrlanc.santos6095bro💀
amio dakhi
I don't know if I'm more amazed by the battery or the phones this guy has
Nice build, but it's not actually 70,200mAh.
It would be 70,200mAh if you used them all in series (3.7V 70200mAh, 259.74Wh).
However, since you're using a 3S9P pack (3 in series, 9 in parallel for 12.6V) you only have 9*2600 = 23,400mAh capacity, but the energy is the same (11.1V 23400mAh is also 259.74Wh).
So might be a good idea to use Wh instead of Ah with multiple cells in series.
All in parallel when you quote "70,200mAh if you use them all in series" it's probably why they sell ebike/escooter batteries with 100,000mAh when there about 10aH because the translator doesn't know the difference and not done his research
Doesn't connecting it in parallel give it more current thus more Wh too? If they were all connected in series you would need a bigger BMS and it will have a overvoltage for that board. Learn more about batteries and how they multiply.
Yup. Definitely it's a clickbait.
@@abdulmuhaimin5274 true
He used 27 batteries, so 27×2600
Great job with all the best information and knowledge also you have good tools and experience 🤠
I would have recommended putting a small gap or insulation between the battery BMS and the 18650 batteries. I have a similar BMS, and when the balancing mode is being activated, the resistors heat up a lot. It would be wise if such heat source isn’t in direct contact with the batteries itself.
Yeah there's a few mistakes he made in making this pack but overall it's a good DIY project for the hobbyist. BMS does heat up especially when charging and balancing the cells those can get very toasty it being right up against the cells is not a good idea.
Ok now get lost
i agree. A bekalite/hylam/teflon piece of 2 mm thickness will do the job. it does not get heated up at all.
😍😍😍Mashallah, you have all phones, Galaxy Note, the best phone, even Note 20 Ultra
Great job, thank you brother. You are so talented
Nice project, I love it! Good job bro
Such a clean work ❤
Advanced congratulation for 6 million subscribers to creative channel
Great job bro ! as always.
No me cansaré en decir que eres maestro enseñando todo lo que sabes 👍
हार तो वो सबक है जो आपको बेहतर होने का मौका देगी....🌟
#motivation
This is extreme, salute man.....
Well done about to do one of this ....
👏 👍
Çok güzel oldu ellerine sağlık. Sizin orda yaşamak yatmış her türlü inkaniz var ne mutlu size
At the end is that the charger you plugged while still charging, meaning it would also work as UPS?
between the bms and the batteries use a thicker cable, in the worst case you could start a fire by consuming too much amperage, it would also add a bit of dissipation to the BMS, it can get quite hot
Watching from India 🇮🇳😍
Love from India ❤
mine.. Im always watching with your videos
Bonjour de France. Très belle réalisation... et très utile lorsque la famille vient à la maison ^^
De Lyon, France, correct, le problème est d'obtenir les adaptateurs pour pouvoir les créer
You are professional skill is amazing
That's alot of voltage from those lithium batteries, nice job👍
Only 12 volts. Some are connected in parallel to last longer and the packs are connected in series to step up the voltage. Check the multimeter.
Just AWESOME...
Love from Bangladesh ❤
Love from India❤🎉
Love from Bangladesh🇧🇩🇧🇩❤❤❤
brilliant 🔥
Great Video, Great Build, Awesome!!! Please if possible share links for the parts! Thank you in advance
love from Bangladesh ❤❤
I love you video and your projects
th-cam.com/video/r2BdGjzHYY0/w-d-xo.html
Love from INDIA 🎉
Nice!
🙏🏻🙏🏻🙏🏻to ur efforts
Excellent 👌🏻
Wow. I really love this channel
כל פעם מפתיא אותי הבן אדם הזה 😄
can you please link the parts that you use in description. it would be really helpful for us
Отличный девайс! 👍
Most creative.
There is no gap for the batteries in between. It will overheat. Eventually melting the interior.
esse carregador é poderoso viu, consegue carregar 5 aparelhos de uma só vez
Love from indonesia 🥰
Nice! 🙂🙂
He should have his own company ❤️❤️🔥🔥🔥🔥🔥🔥
He does, it's this yt channel. You seen the number of views and ad revenue he would be getting
Love from Bangladesh🇧🇩🇧🇩🇧🇩🥰🥰🤩🥰🤩🥰🤩
MANTAP 👍 SALAM dari INDONESIA 😘
good job
在纸盒贴纤维网，刷环氧树脂，加固打磨喷漆，类似造船工艺，这样使盒子更加牢固和美观。
Great superb😊
NICE Video
Is fantastic
Nice video sir love it all video
What is the power level indicator?
Cool
Top
Good❤
Love from india
O misevi é um gênio
Good job
Wow
جميل جدا الله ينور عليك
Wireless charging ka fayda kya hai jabki usko ek hi jagh rakhna padega. Usse acha toh wired wala hai jitna lamba wire utna dur move kar sakte
196 cc engine enka vankuvathu thirija sollunka pro reply plz pro
Love from mirudih
Always curious what is it with the pinky nail ?
You know, with projects like these, I've wondered about some box designs for where maybe you could hot swap out the battery cells by the sets. instead of hard gluing them. Just kinda like they were set in like AA batteries. Especially when using older cells like that. It'd be sort of a battery case then, where you take segments to check into which need changing after a time by the line, or by the block from time to time. So that way you are making use of the case longer than the cells. I realize it would mean making a bigger brick box, but that would simply be the exchange, and lower a bit of the risk of cell heating.
Super video
Thanks
Aapki video buhut achchi hai
Lekin is video me koi jankari wali chiz nhi hai ham logo ke liye
Ham logo ne sirf ye smjha hai ki ise aapne kese bnaya
Or ham log kese bnayenge ye aapne nhi samjhaya
To mehrbani karke samjhane wali video banaya kijiye
Good job brother
Hi Bro love from india
WooooooooW 👍
каким образом получилось 70.2А.? может разделить надо на 3
power bomb 😄
Be sure to do the unboxing and review of S23 ultra when it comes out
is this a series one?
How to buy description list
Plz link or something
All that work, just one question? Why would you not make it solar chargeable also, power does run out usually in the most awkward of places.
Where do u get all these machines
Nice video
i like
👍🏻👍🏻👍🏻
pls help, can the charging connect to a 6s BMS 25.2v?
кнопку не поплавит если все одновременно заряжаться начнет используя qc?
hello could you help me build mine where to get the materials I really like your videos
Bro drill machine link tettu
👏👏👍🏻👍🏻
Can you tell me where can I buy those batteries please
I love you channel
Please share link of all modules sir
I am getting trouble to find the products
🙏
And me too am unable to buy the modules
nice❤️❤️
Kitne ka hai ye power bank
It looks like a nice build Great Job, but I’m just a beginner and maybe that’s why even if I slow it down or pause your not making it easy to see how your wiring the build I mean it’s obvious you know what you’re doing but I thought you was sharing the build. I want to try the build but don’t want to get stuck at the end. Plus you didn’t even mention the charging plug you used at the end nor is it in the supply list.
❤
No words 😶 take my money 💰
Please tell me plates u used
Please unboxing DM101 smart watch
Hello friends happy 🙋♂️❤️🙋♂️
How many Wh has the Powerbank?