Hi Kevin 🤓! I was looking into building an 8S UDR and guess who popped up 😎! I'm going to scratch build my UDR and make it 8S. I'm just three years behind you 🤓! So I'm starting with the main chassis and building it my way. I'll keep you posted on my progress. Ron Young 🤓
Don't know about you Kev, but I find my cars save me a lot of money on petrol for the lawn mower. Looking at the grass falling from the UDR, looks like you're also reaping the benefits!
Theres another video where a guy tried 8s seems the tires are not up to the task. Can't wait to see what you do with it. Love your Videos keep em coming
I think the cut aways of the Unscrewing of the body is really cool I like how you put the time into it to place the camera I know it it is a little bit of extra work but I do appreciate it because it does end up having a cool effect at the end so yeah either having a music cut away with like a fast forward would do the trick
A receiver that supports binding to many models might be a really good investment for you. For example, Spektrum DX5C. The 2-channel receivers are like 16 bucks so it's not hard to switch all your stuff
I love you kevin talbot I was just joking with you and thank you because you installed the traxxas UDR Hobbywing engine tons you have to keep ESC for traxxas and install it on weaker cars and whoever kevin talbot strengthens wltoys or other cars with stronger engines like traxxas like
Air resistance will affect top speed. I suspect the vehicle will flip before you hit 70mph as the wind gets under it. May have to put stiffer suspension in the rear and add weight to the front.
just got my first hobby grade rc......1:10 ecx torment sct and after the 4th run the 2wd diff went....any good reasonable brushless system and gears to use?
Actually it can pull wheelies on 6s, and I have done it on 2 3s 5000mah 55c batteries, except you need to do it on a ground that will give it very good grip.
8s udr,awesome! I seen exocaged rc do it n couldn’t control it,lol everyone’s telling me to run 4s that it’s more controllable but nah I’ll stick with 6s n bump it to 8s once I see if it’s worth it after ur runs👍👍👊👊📹📹
Have you considered wrapping the center of the tire in heavy fishing line to keep them from ballooning? I think they are already fairly skinny tires so if they balloon much at all it's probably going to be uncontrollable.
hey, that was pretty cool! liked the sudden explosions! just wondering: does the Traxxas VXL-3s ESC fit on the TRX-4 using screw holes without modification? you should have one laying around from the Slash 4x4 when it came out of the box. help!
This is the full video from a few days ago hope you enjoy :)
Kevin Talbot thanks Kevin :) your rc videos are my favorite👍👍👍😁😁😁
Gens ace 3300mah 45 4s looks like it will fit there 26mm thick
Always.....
Greetings from Germany Mate
hahahaha this is gold
I did a quick search for 8s udr. You are the second one to do so. Not too far behind.
I think this truck would suit 8s from factory
Agreed
it's supposed to be 'scale'/realistic ya noobs. 4s is about right for it.
agreed
TMM no the udr isn’t. the scale world of rc is crawlers these are bashers which aren’t supposed to be realistic
Ryan A. UDR is not a hardcore basher. It’s more scale than any another traxxas products.
Kevin: alright guys do you wanna make some ext-
Me: SKIIIIIPPPP
lmao so true
Seriously that is me in every way
1000% anyone will do that
😅 yup
@@NoMercyRC have you taken his course?
Hi Kevin 🤓! I was looking into building an 8S UDR and guess who popped up 😎! I'm going to scratch build my UDR and make it 8S. I'm just three years behind you 🤓! So I'm starting with the main chassis and building it my way. I'll keep you posted on my progress.
Ron Young 🤓
Hot glue and duct can accomplish almost anything! Such a cool upgrade Kev!!
Technically 7s? 😂
lol
Lol
👍🏻
lol
That's not possable
Awesome job with the mod! Can’t wait to see it flat out.
you are the first person to do 8s on a udr
This video is crazy but I waited all day for it
Removing the body shell looks like a real crawler👍👍
Can't wait to see it on 8s!
I’ve been waiting for this video for ever great video kev
Don't know about you Kev, but I find my cars save me a lot of money on petrol for the lawn mower. Looking at the grass falling from the UDR, looks like you're also reaping the benefits!
Yesssss. 8s UDR. Can't wait to see it running properly. 👍
Lipo: you will never get rid of me
Kev: grabs a bigger hammer😂
Can't wait to see this thing truly ripping on 8s
If you’re not the first then you probably the first person to post it on TH-cam!! (:
Li-po vs Kev was a good fight😄😄. I'd love to see your traxxas outdoors..
I did enjoy the video. And you were correct alittle grinding is all the connector restraint bracket needs to accept the XT90’s
That is going to be a beast on 8S! Can't wait to see it run.
Theres another video where a guy tried 8s seems the tires are not up to the task. Can't wait to see what you do with it. Love your Videos keep em coming
This is what you call a Traxxas
Yeah that's the brand
😂
I stayed up until midnight to watch this video!
Lmbo. Stabbing the lipos. I watch so many of Kev's videos and this guy is something else. Funny knowledgeable and funny. Enough Waffle Waffle.
Yes you are the first one to make the 8s udr
I think the cut aways of the Unscrewing of the body is really cool I like how you put the time into it to place the camera I know it it is a little bit of extra work but I do appreciate it because it does end up having a cool effect at the end so yeah either having a music cut away with like a fast forward would do the trick
Also, I totally approve of your Lipo disposal procedure.
8s for the win
Awesome vid kev. That thing is gonna scream on 8s.
A receiver that supports binding to many models might be a really good investment for you. For example, Spektrum DX5C. The 2-channel receivers are like 16 bucks so it's not hard to switch all your stuff
Dude I love your vids,very informative,thank you for taking the time to explain things, patiently awaiting more input
8s has already been done. Can't put all the power down without changing some things. Mainly stiffening the truck up
10:49 I died
Yeah me too
14:01 I just did the math and it looks like on 8s the UDR would do about 64mph. Close guess tho
Demolition man of RC!!
I love you kevin talbot
I was just joking with you and thank you because you installed the traxxas UDR Hobbywing engine tons you have to keep ESC for traxxas and install it on weaker cars and whoever kevin talbot strengthens wltoys or other cars with stronger engines like traxxas like
What happened!!!!! Lol you trip me out man love watching your videos!!!!!
Air resistance will affect top speed. I suspect the vehicle will flip before you hit 70mph as the wind gets under it. May have to put stiffer suspension in the rear and add weight to the front.
Wow I was waiting for this video Kevin thanks I have 3 traxxas and 5 (x maxx) and 1 grave digger 😜
The udr,xmaxx and the e Revo are my favorite
Awesome job blowing up the battery lol oh nice 7s Lipo run lol
Hey Kevin!
at 0:08 Look at the box can you see a green short course car? i have it can you make avideo with it? Thx
just got my first hobby grade rc......1:10 ecx torment sct and after the 4th run the 2wd diff went....any good reasonable brushless system and gears to use?
Did I just see a demon be released at 12:39. I mean dat noise though got me trippin!😂
Luv the vids Kev especially the lipo fire
Actually it can pull wheelies on 6s, and I have done it on 2 3s 5000mah 55c batteries, except you need to do it on a ground that will give it very good grip.
Kev your videos are great. Keep it up 🤘🤘
8s udr,awesome! I seen exocaged rc do it n couldn’t control it,lol everyone’s telling me to run 4s that it’s more controllable but nah I’ll stick with 6s n bump it to 8s once I see if it’s worth it after ur runs👍👍👊👊📹📹
6s is a bit ott but I will try 8s for some fun :)
Exocaged also put the xt-90 connectors in
ALEXANDER GARY Lol that’s hilarious
Did u notice the final number of mph the udr does on 8s 6666666 it’s gonna be a evil udr!👹👹👹👺👺
Nice job Kev 😃
Kevin, did you do a video on how much faster the UDR is on 8s on the outside? I am sure curious how much faster you made it!
Awesome, I can't wait to see it go
That brutal lipo treatment that u have done is most entertaining part of the story man.
Have you considered wrapping the center of the tire in heavy fishing line to keep them from ballooning? I think they are already fairly skinny tires so if they balloon much at all it's probably going to be uncontrollable.
I did my research you are the first to put 8s in it. Lol
Cool man know your udr is going too be crazy fast👍👍👍😎😎😎😁😁😁
Definitely a mad scientist!!! 😂😂😂
Love the videos bro keep the good work up
Nice one get the slash back out. After watching your vids I have bought one and love it.
love all your videos. your one brave dude popping those lipos like that! lol sure did love watching it though
world first 8s UDR .. Nah, lets play with a lipo and screws .. Love it
That truck is awesome
so cool you are my favorite youtuber
hey, that was pretty cool! liked the sudden explosions! just wondering: does the Traxxas VXL-3s ESC fit on the TRX-4 using screw holes without modification? you should have one laying around from the Slash 4x4 when it came out of the box. help!
Happy Days - 8S -Stay Awesome
Nice car and firework😉
How much did the tiers balloon? and do they do so more then other RC?
Does the udr motor get too heated with 8s? I know max6 is fine but what about the motor?
Wait can u use more than one receiver to one remote
Yes most people do I have a remote that runs my Xmaxx and slash
Or both at the same time buts it's dangerous lol
His reactions to stuff is so hilarious. Especially when he said what happened and hmm
cant wait to see wit 2 good 4SSSSS
Sick vid! do u find gunning ity on polished concrete glazes your tyres?
Nice ! Did you Find two 4s lipos that will fit to run 8s?
I learn new things in your videos thanks bro!!!!!
I'm really waiting for the skate park bashing video😢
420 tanker its hard to wait
Great vid as usual 👍👍
So is the lesson here is not to upgrade it to 8s or was this more a battery issue?
Lipo issue he had a dead cell in it right from the get go, that's why there was x 's on it !!
Yes you were the first person to do 8s BUT the video was posted a while after someone else
Exocaged rc just beat you to it :) you're still one of the first though. I'll be making mine 8s when I get it too.
Hey Kev why not get an aluminium chassis for your rustler
Is there a kit to customize those duel fans to actually work? I so want that for my 🚚!
No tire wobble....did you balance them?
Like the 8s I've never seen one before. I think it's the first
Awesome truck!!!
Awesome thanks for the educated, entertaining adventures!!!
Man what you think is better that udr or e revo . me i love the desert racers
Hey Kev awesome video! I have a question what gearing are you running on your trx4? I just put a mamba x system in mine but it don’t seem as fast.
Did you maneged to save the connectors of the dead battery?
it is insane on 8s and i loved th lipo fire
one day you should get a electric 1/5 scale rc
Is the new esc waterproof and the motor might not to be able to hold up to 8s for too long
max6 is waterproof yes
Ok
Is the udr waterproof lmao it's like 1000$ and a traxxas my 160$ slash is waterproof
The new esc. Do u have a slash video?
@@frontleverguy2216 what? Lol
kevin have you ever built a home made rc roll cage for a slash ??if you have can't find a video
I wish I had one of these! Dope video
I'm thinking of switching out the vxl 6s with a 8s and the motor with a leopard 4282 1600kv and max gear it 34/47
thats some high gearing
8s baby!!!!
What drill bit things to take those small screws out?
Nice job kev
What made the battery go anyways? Was it just bad to begin with?
Udr to this day is kong of scales
Kev, I coudnt find steve's youtube channel, where can I find it??
Where ever you hear high pitched ( annoying) talking
nice new vid try to put some thicker shock oil in it it bottoms out hard.even on the little jumps.