You’re a legend . Controller stopped working after I tested the head light voltage. This worked. I soldered the blue and red out straight out of the controller to the display.
Same issue! The headlight wire was broke. Caused error E10. I cut the red and blue wire from the display and put them together! I put a wire nut on it and left it! So far it solved the issue!! Thanks for the video!!
my headlight had an issue and then suddenly error10 code. i replaced the julet cable set and motor controller. if this solution you provided does not work, do i need to get another sw900 display?
Would buying a new display work? Or only this wire trick? My s866 display isn’t working as far as showing my mileage and my miles per hour but the bike itself is working fine. Found same display for $30 you think a new display should fix my issue?
Wait… so, your riding along, the power fails. So, you remove the 6 screws that hold together the controller encasement, find the red and blue wires, touch them together, screw the encasement back together and take off. And when it happens again 200 feet later…. You repeat that???
![[Full] 4 ต่อ 4 Celebrity EP.920 | 3 พ.ย. 67 | one31](http://i.ytimg.com/vi/KwiW2M_kAg4/mqdefault.jpg)
You’re a legend . Controller stopped working after I tested the head light voltage. This worked. I soldered the blue and red out straight out of the controller to the display.
Same issue! The headlight wire was broke. Caused error E10. I cut the red and blue wire from the display and put them together! I put a wire nut on it and left it! So far it solved the issue!! Thanks for the video!!
Help my bike gotrax and they don’t have all that cables. Tired taking it apart but it’s impossible
my headlight had an issue and then suddenly error10 code. i replaced the julet cable set and motor controller. if this solution you provided does not work, do i need to get another sw900 display?
Could you please please explain to me how I install the s866 lcd display to my e-bike voltage off the wires
Would buying a new display work? Or only this wire trick? My s866 display isn’t working as far as showing my mileage and my miles per hour but the bike itself is working fine. Found same display for $30 you think a new display should fix my issue?
Nah it’s not the screen it’s the inside of the controller that gets messed up sometimes
Es normal que huela a quemado?
Which wires you connected together? The wires from the light or from lcd display??
@@1991franjo LCD display
Thanks😊
Do you need to keep them joined so the code wont pop up anymore?
Yes keep them joined together
Is this always the case for error 10? I don’t have brake lights so 😅
@@Landonelegado Not always 100% Fix, sometimes error 10 means the motor is completely gone
True! My motor got burnt up! Spot on bro
Is that the controller wires?
yes
But which controller wires , is the question. Light wires ???
Wait… so, your riding along, the power fails. So, you remove the 6 screws that hold together the controller encasement, find the red and blue wires, touch them together, screw the encasement back together and take off. And when it happens again 200 feet later…. You repeat that???
just get a ducttape or sum
Just ziptie or tape them together 🙏
Which wires ??? There many
How do you get to those cables?
Under hearth my seat there is a compartment
No, I have an electric mountain bike so there is nothing there...