ReturnOfDeeO I was going to get a YZ 125 but one of my dads friends was selling a kx250f so me and my dad went there today and i will hopefully be able to pick it up soon! The kit looks great!
Your supposed to put the zip tie through the fender hole and up into the number plate, and go into the other hole and down through the fender hole. If that makes sense.
ReturnOfDeeo the ziptie is for the peice on top of your front number plate (the bit that curls around the bar) there should be a little hole that it goes through just ziptie it together.
Nothin makes you wanna ride the old 2 stroke more than hookin it up with a full replacement of the hand controls and some updated plastics. The no graphics look is actually fire right now. You got potential for a sick graphics design with the red accents you already have on the seat cover.
i have my 2011 kx250f i thought about doing the 2012 450/2013+ 250f plastics witch would involve a 12+ 450 airbox and then all new plastics some zipties a new seat and a bracket or a newer gas tank for the shrouds.i also thought about getting a yz125 with the alum frame aka 05+ as a second bike
@991 for that stuck / stripped Phillips shroud bolt: very carefully use a Dermal tool to make a slot for a screw driver you have. (I'd touch up the driver edge so it's not rounded at all). Then spray the back side as best you can with penetrating oil. Leave for two days and spray again, leave for a day then come back and take that bolt off. Hope you can get the shroud off.
Unfortunately no, it's not just that the screw is sort of stripped, there is also a bolt and it won't come out either. It's something inside the tank holding it on.
To tighten the sprocket nut. I take the bike off the stand and put it in gear (back it up into a wall if it still rolls) and use a large crescent wrench. Bike looks sweet 🤘🏻
That's exactly what we did with the 450! We'll do that with the 125, but it'll just be easier to have four hands working on it and holding it rather than me dropping the damn bike on my head lol
ReturnOfDeeO HAHAHAHA Im usually the only one working on my bike so ive learned a few things over the years. I can usually get the nut tight but that stupid washer you have to bend down is a pain in my ass every time
If u want the shrode off. Take a drill with a small drill bit. Drill carefully into the center of the stripped screws. Drill halfway in or so. Reverse the drill. The screw will back out. You will b able to replace your gas tank shrode. That technique works every time. I have successfully done that on my quad with bolts and screws too.
Can u take a pair of pliers. Grab the end of the shaft. U have the full grip of it. If nothing works out. Maybe the shop where u got the plastics, has a specific tool 4 that. Or at all? Leave it b.
I have a 04 YZ125 with big bore kit. to 150cc but I wanna do new plastics what year will fit with little modifications ill have to do for them to fit on bike. I race desert and right now I race my 06 YZ250 full moded but I miss racing my 125 so I wanna do a full rebuild from bottom to top. I've already rebuilt the engine and everything else just need to put new plastics and wait for my new Excel pro black rims with gold tusk hubs & gold nipples just waiting to get done being chew with new heavy duty black spokes for the desert cause regular spokes go by fast out in the desert do to all the rocky conditions we have to race in. Just got my new IMS desert tank with dry brake for quick fill, IMS pegs and works connection skid plate. I'm thinking of doing a LED light bar setup for when I race Glen 24hr and other night races but need to find mount online or fab and weld one up myself. Bike has huge part list from Pro Circuit pipe & silencer & full suspension, Renthal bars & spocket & chain, Boyesen full clutch kit & spectra aluminum cover & water supercooler. Fully rebuilt & jeted carborater with all new fuel & oil hoses. ASV break away levels & new throttle and clutch cables. But still have things I need to get hand guards, grips, anodized gold bolts for whole bike, new seat with factory effex seat cover with ribbing, MSR chain guide, front sprocket guard, Acerbis frame guard with grip, Maxxis maxxcross desert rear tire & Maxxis desert IT front tire, radiator and hoses, radiator guard that with save your life in the desert trust lol if anyone out there is selling a stock seat I can refoam and shape out for myself hit me up asap please. but please anyone that knows what the newest year plastics I can fit on a 2005 yz125 with little modifications hit me up asap as well please will be greatly appreciated. also if you know 2006 yz250 new plastic that will fit that will help to cause mite rebuild that bike after to sale for the new yz250x which is a fuck monster for the off road and desert sense!! if you guys could help me out that would be very cool as hell!!👍👍👍💸💸💸💵💵💵💰💰💰🚬🚬
Dunno if you ever got the screws out of the gas tank, but my '05 yz125 did the same exact thing before i put restyle plastics on it. The screws that hold the shrouds on thread into metal inserts that the gas tank plastic is then formed around when it was manufactured, but unfortunately it was a poor design because the torque of the screws causes the metal inserts to spin within the gas tank plastic. Fortunately, it's not too hard to get out once you realize this. I just pried up on the shroud with a flathead that i slipped up behind it real close to the screw, and while applying a prying force to it, I twisted the screw with a power drill for a minute or 2 until the inserts that the screws were sorta seized into clawed their way outta the gas tank plastic sockets -- which are dead ends btw -- that is, they don't go through to where the fuel is. Just packed in some Loctite Repair Putty and stuck the inserts back in and let it cure overnight and they've held tight for 2 years now.
Hey CBH, that's some great info! We actually ran into more problems with the gas tank, with it leaking and stuff, so we bought a whole new tank and obviously that solved the problem on the shroud screws being "stuck." But that's great information to have if it ever happens again on the 125!
Was looking to do this for my yz! Definitely gonna have to do it it looks so sick. Had the same exact problem with my shrouds to had to break them off I believe lol
Such a pain! But yeah man that kit looks awesome. It's only cosmetic so to be honest your money is better off going towards suspension or something, but it sure does look great!
Hey Deeo. Any luck with the gas tank shrode on th yz125? I wanted to say that I joined your rmfantasymx group. When i entered your group. I was 181 for entry. It will be fun to play with everyone. Aneheim 1 on FS1 at 9:30est., 6: 30pst. I can't wait to watch it. Have you made your picks for fantasymx.
My shrouds were also permanent on my tank, we got a torch, and cut the old plastics with a knife, heat up bolt, and pull it out, there is an insert with inner threads in tank it can come out, if you have any questions just ask!
for the front number plate you have to zip-tie the holes together (hence the zip-tie in the kit). I personally don't love the restyle kit. I put on the 2016 plastics for the yz's onto my 2003, and only used the restyle side plates on mine.
If only I had a screen at the end of each video that said something like "Connect with me:" and had ways to contact me, or if I put that information in the description lol. At least 5,000 USD as I am not trying to sell it and we just redid the whole bottom end, plus these plastics.
Was literally going to tell you to get a set! On top of the game bro✊🏼
Leave a like for the restyled 125!
ReturnOfDeeO bike needs some graphics
ReturnOfDeeO I was going to get a YZ 125 but one of my dads friends was selling a kx250f so me and my dad went there today and i will hopefully be able to pick it up soon! The kit looks great!
Well for the amount of the video I've seen
ReturnOfDeeO I think it's cooler without graphics lol just an opinion whatever you do with it is cool
Your supposed to put the zip tie through the fender hole and up into the number plate, and go into the other hole and down through the fender hole. If that makes sense.
Wow what a difference! Bike looks 50x better
YES YOU FINALLY DID IT!!! So stoked for you! can't wait for the dope vids!!
ReturnOfDeeo the ziptie is for the peice on top of your front number plate (the bit that curls around the bar) there should be a little hole that it goes through just ziptie it together.
I like it! Good video and really enjoyed the beat in the background
yeah my 05 yz didn't fit an 08 yz front number plate so I did the top bolt and zip tied the bottom 2
My radiator shroud for some reason won't align with the radiator so I can't put in the bottom screw. Any advice?
Literally best speed for this type of time lapse 👌
Glad you enjoyed YZ!
Nothin makes you wanna ride the old 2 stroke more than hookin it up with a full replacement of the hand controls and some updated plastics. The no graphics look is actually fire right now. You got potential for a sick graphics design with the red accents you already have on the seat cover.
The 125 is looking so fresh deeo!
i have my 2011 kx250f i thought about doing the 2012 450/2013+ 250f plastics witch would involve a 12+ 450 airbox and then all new plastics some zipties a new seat and a bracket or a newer gas tank for the shrouds.i also thought about getting a yz125 with the alum frame aka 05+ as a second bike
Same with my yz250 had to kinda bend the front number plate to fit and run bolts through it but It worked
love it can't wait till it's all the way finished
@991 for that stuck / stripped Phillips shroud bolt: very carefully use a Dermal tool to make a slot for a screw driver you have. (I'd touch up the driver edge so it's not rounded at all). Then spray the back side as best you can with penetrating oil. Leave for two days and spray again, leave for a day then come back and take that bolt off. Hope you can get the shroud off.
Would it come off if u took a rubber band and put it in the bolt and use the rubber band as if the screwdriver was bigger
Unfortunately no, it's not just that the screw is sort of stripped, there is also a bolt and it won't come out either. It's something inside the tank holding it on.
On my kaw the front number plate did the same I used a zip tie to hold it in
To tighten the sprocket nut. I take the bike off the stand and put it in gear (back it up into a wall if it still rolls) and use a large crescent wrench. Bike looks sweet 🤘🏻
That's exactly what we did with the 450! We'll do that with the 125, but it'll just be easier to have four hands working on it and holding it rather than me dropping the damn bike on my head lol
ReturnOfDeeO HAHAHAHA Im usually the only one working on my bike so ive learned a few things over the years. I can usually get the nut tight but that stupid washer you have to bend down is a pain in my ass every time
I remember watching the video where you cut the fenders. made it look a lot better.
Do you need to take the wheel off to put on spoke skins? Been looking into some.
No you don't have to.
that's awesome i didn't even know they made a restyle kit! i always just did what you did with just the front fender
Jesse Strader really?
I would have been all over that if i knew. now i want to buy another yz250 just to do it lol
Jesse Strader they've been around for 6 or so years
thats probably why, i havent ridden much in the last 6 years even though i just bought a new bike. just havent kept up with whats out there.
If u want the shrode off. Take a drill with a small drill bit. Drill carefully into the center of the stripped screws. Drill halfway in or so. Reverse the drill. The screw will back out. You will b able to replace your gas tank shrode. That technique works every time. I have successfully done that on my quad with bolts and screws too.
Gregory Valliere the whole nut is spinning. Drilling the bolt won't do anything as the whole thing will still spin without coming out.
Can u take a pair of pliers. Grab the end of the shaft. U have the full grip of it. If nothing works out. Maybe the shop where u got the plastics, has a specific tool 4 that. Or at all? Leave it b.
Where do you order graphics for these kits
the rtech revolution plastic kit comes with a tank but the hole kit isn't cheap at all lol
zip tie the front number plate??
I have a 04 YZ125 with big bore kit. to 150cc but I wanna do new plastics what year will fit with little modifications ill have to do for them to fit on bike. I race desert and right now I race my 06 YZ250 full moded but I miss racing my 125 so I wanna do a full rebuild from bottom to top. I've already rebuilt the engine and everything else just need to put new plastics and wait for my new Excel pro black rims with gold tusk hubs & gold nipples just waiting to get done being chew with new heavy duty black spokes for the desert cause regular spokes go by fast out in the desert do to all the rocky conditions we have to race in. Just got my new IMS desert tank with dry brake for quick fill, IMS pegs and works connection skid plate. I'm thinking of doing a LED light bar setup for when I race Glen 24hr and other night races but need to find mount online or fab and weld one up myself. Bike has huge part list from Pro Circuit pipe & silencer & full suspension, Renthal bars & spocket & chain, Boyesen full clutch kit & spectra aluminum cover & water supercooler. Fully rebuilt & jeted carborater with all new fuel & oil hoses. ASV break away levels & new throttle and clutch cables. But still have things I need to get hand guards, grips, anodized gold bolts for whole bike, new seat with factory effex seat cover with ribbing, MSR chain guide, front sprocket guard, Acerbis frame guard with grip, Maxxis maxxcross desert rear tire & Maxxis desert IT front tire, radiator and hoses, radiator guard that with save your life in the desert trust lol if anyone out there is selling a stock seat I can refoam and shape out for myself hit me up asap please. but please anyone that knows what the newest year plastics I can fit on a 2005 yz125 with little modifications hit me up asap as well please will be greatly appreciated. also if you know 2006 yz250 new plastic that will fit that will help to cause mite rebuild that bike after to sale for the new yz250x which is a fuck monster for the off road and desert sense!! if you guys could help me out that would be very cool as hell!!👍👍👍💸💸💸💵💵💵💰💰💰🚬🚬
The ziptie is for the top piece that goes around the bar pad
Hello 2s brother, where can we order that rear fender and side cover of your YZ125. Watching here from Phillippines
I got these from UFO!
Website sir? Thanks
Does anyone know if this restyle kit only works with the alloy sub frame 125s?
Seb McCartney works with all yz’s 02-16 I believe
That YZ looks so much better now Deeo! ;)
hey deeo I love your videos and I think the zip tie is for the flappy thing on the number plate
angus 685 thanks! I don't think it's for that though. It doesn't have a way it could attach with a zip tie
Deeo I have a steel frame yz what paint were you talking about on the frame
I’m trying to get a set for my 99 but can’t find any, u might have an idea of who might have em?
Not sure. I'd just say check all the popular plastic brands
Hey DeeO I was wondering if I could have your old plastics I have the same bike and its the same year.
Hey there unfortunately I gave them away to other people. Sorry!
you can get the cycra stadium plate, they just zip tie on
bobaganooshy they bolt on like any normal front plate, they just have triple clamp protectors that ziptie
Mad Max Racing Yea the zip ties hold the bottom and the 1 bolt on top. that way he doesn't have to worry about the pins
Is that a plastics to YZ 125 2006 ?
I'm not sure. Just the UFO restyle kit.
Dunno if you ever got the screws out of the gas tank, but my '05 yz125 did the same exact thing before i put restyle plastics on it. The screws that hold the shrouds on thread into metal inserts that the gas tank plastic is then formed around when it was manufactured, but unfortunately it was a poor design because the torque of the screws causes the metal inserts to spin within the gas tank plastic. Fortunately, it's not too hard to get out once you realize this. I just pried up on the shroud with a flathead that i slipped up behind it real close to the screw, and while applying a prying force to it, I twisted the screw with a power drill for a minute or 2 until the inserts that the screws were sorta seized into clawed their way outta the gas tank plastic sockets -- which are dead ends btw -- that is, they don't go through to where the fuel is. Just packed in some Loctite Repair Putty and stuck the inserts back in and let it cure overnight and they've held tight for 2 years now.
Hey CBH, that's some great info! We actually ran into more problems with the gas tank, with it leaking and stuff, so we bought a whole new tank and obviously that solved the problem on the shroud screws being "stuck." But that's great information to have if it ever happens again on the 125!
Where did you buy those spoke skins?
Are you getting graphics
What years have the permanent shroud
Mine is a 2003, not sure what other years had the same issue.
Where can I buy those plastic
UFO Plastics!
What kind of year do the graphics have to be to fit the restyle kit?
They have to be the restyle kit template.
Was looking to do this for my yz! Definitely gonna have to do it it looks so sick. Had the same exact problem with my shrouds to had to break them off I believe lol
Such a pain! But yeah man that kit looks awesome. It's only cosmetic so to be honest your money is better off going towards suspension or something, but it sure does look great!
Where did you get the works pipe?
My 02 yz250 left shroud is stuck and it rly pisses me off
late af but man I have a 2012 yz125 and I'm looking to buy a 2016 plastics. do you think they will fit?
I'm not totally sure man, sorry!
hey , was wondering where you got your seat cover from ? can only find them with blue strips for the yz
Guts racing.
Awesome DeeO!
Is daddy deeo going to ride again
What year is the yz?
Would you ever do the retro look on the YZ?
Just an idea.
Could be cool, but we'll see.
retro graphics wouldnt be a bad idea tbh
I am either going anniversary yellow on my 125 or retro all white plastics with red seat and red hoses
she looks so much better
+returnofdeeo what silencer do you have on your 125
Hey Deeo. Any luck with the gas tank shrode on th yz125?
I wanted to say that I joined your rmfantasymx group. When i entered your group. I was 181 for entry. It will be fun to play with everyone. Aneheim 1 on FS1 at 9:30est., 6: 30pst. I can't wait to watch it. Have you made your picks for fantasymx.
What settings do you run your gopro on when you ride? I just got the proshot btw.
720p or 1080p superview.
My shrouds were also permanent on my tank, we got a torch, and cut the old plastics with a knife, heat up bolt, and pull it out, there is an insert with inner threads in tank it can come out, if you have any questions just ask!
Oh wow interesting. Good information, thanks for sharing Julian. It might come to that!
ReturnOfDeeO anytime,
for the front number plate you have to zip-tie the holes together (hence the zip-tie in the kit). I personally don't love the restyle kit. I put on the 2016 plastics for the yz's onto my 2003, and only used the restyle side plates on mine.
If u have a 04 2015 plastics bolt right up
Ben Smelcer i have a 04
I just got the white cycra restyle for my 06 yz125
DeeO! You should get some black rims. And a new exhaust system!
Okay.
Hey bro I have a 2001 yz125 and I’m on a mission looking for a restyle kit for it... do you know of any that work?!
hey deeo , do you have any tips for getting the 2 smoke residue off of the back number plate next to the exhuast ?
Does the kit come with new bolts?
Unfortunately no it did not.
Hi friend, I'm from Brazil, and I need to ask a question. I have a YZ 125 2002 I want to leave my bike just like you! This plastic kit is it special?
The kit is from UFO plastics! You can buy one!
Love the bike man. I got the same kit on my bike
Does it work with ttr125?
Probably not, unfortunately.
the zip tie is used for where number plate wraps around the bars. I did this same project. I just epoxied the number plate to the triple clmp
I think the spoke skins would look decent on the 450 with the red graphics
Maybe but I'm not going to run them on either bike!
Hey DeeO what was the shipping time for the plastics?
Not sure man. A dealership actually ordered them and I picked them up from there, so I'm not sure how long the shipping time was!
@@ReturnOfDeeO Okay thanks for the info! Appreciate it! Love the vids!🤙🏽
What is your kit deco ?
What do you mean?
Escuse me im frensh
But your stick ??
whatta bummer about the shrouds man. still looks great though!
How to order
I think the website would be a good place to start!
How much for the 125 I got 3k in cash and how could I get ahold of you
If only I had a screen at the end of each video that said something like "Connect with me:" and had ways to contact me, or if I put that information in the description lol.
At least 5,000 USD as I am not trying to sell it and we just redid the whole bottom end, plus these plastics.
ReturnOfDeeO ok my dad said in income tax time we could do 7k to ship it
7k for an 03!? 2017s are 6.5k
lololol
Dude right? Beats me but hey if he wants it that badly...
"Everywhere we go" by sonreal 6:19
Good music taste :)
they look sweet!!!!
Nice sound
Can you send me the old plastics and spare parts you wont use
No, sorry!
Sick dude
going to watch this on my lunch. thanks for the entertainment 😸
i have the same bike and same plastics and i live in pueblo
NIce man!
There's something I just realized. Ur 125 is the same age as me and ur 450 is the same age as my brother
i knew something was up when u didnt show the whole bike on your snapchat😂
Nice gaerne boots!
Front number plate has a zip tie because the kit don’t fit
Id love a 125 but i dont think im tall enough, im only like 5' 7 :(
Matt Raven youll be fine
your tall enough i rode a ktm i think it was an 03 but i just couldn't kick it over
5'5 whats up!
5'8 on a 250f
6'0 on a 250
it looks like a 450 a bit now
it looks like it needs a new tire pretty bad.
It does!
a restyle kit? that's newer plastics for older bikes?
Correct, more current shape and style plastic that is made to fit the older bike without drilling your own holes or anything.
nice that's badass
that thing needs a rebuild
MY REAR FENDER IS PISSING ME TF OFF I HOPE THIS SHIT HELPS
Deeo is faster on the yz than on his 450
Not true.
I meant when u first got the Honda lol
Btw how did u get that custom bar pad
Still not true. And ordered it online like 12 years ago!
Get some graphics that match your 450
Nooice!!!
Thank you CRB!
I thought deeo was drunk in the beginning😂
That would have made the even more fun!
I knew it 😉
You had a great eye to catch that box in my first video!
perfect timing on the video work was getting boring lol
Haha glad I could help!
Just put grip tape all the way up the frame.
Doesn't really work on the round steel frame.
ReturnOfDeeO You can get bike specific pre cut grip tape or a full sheet, it's a lot more flexible that grip tape for skating.
dr187mx find me bike specific grip tape for a 2003 YZ 125. Link it here when you do.
ReturnOfDeeO UFO makes plastic frame guards too. I put them on my yz and use grip tape on the 450. I sent you a Snapchat of them.
Hand guards are 👎. Looks good though 😄
scott hannan funny because I think you're 👎🏻
I was planning to get a ktm 125 bug you might have changed my mind! Looking at that yamaha i might stick with #bLUcRU
i didnt unsubscibe but i just had to resubsrcibe, smh WTH is youtube even doing
Your pretty weard
What?