How to add turn signal indicators to your Holley Dash
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- In this video, I go over adding turn signal indicators to a 6.8" Holley Pro Dash. Nobody wants to be driving down the road with your signals flashing. At least with this, you don't have an excuse. It could not be easier, it's just adding two wires to the I/O connector and splicing them into the existing turn signal wiring in your car.
Easily add inputs or outputs to your Holley Dash, or other Holley connector with this kit. It provides 5 wires with pre-crimped terminals. www.summitraci...
This is the kind of explanation I need for things. 'This sh*t, right here" LOL Much appreciated!
You're welcome, I try to make it as simple as possible and that anyone can follow along step by step. Thanks for watching and commenting.
That screen background in an 89 camaro, most American thing ever!
Thanks, glad you like it.
Hey Kevin, your vid was the first to show up on the google machine
I try to name videos what I'd type into Google if I was trying to figure out how to do something. Thanks for watching and commenting.
This was super helpful for me in setting up the dash in my 68 Camaro. Thanks for spending the time to make these videos
You're welcome, thanks for watching. I'm glad they helped.
valuable easy info for thirdgen guys, much appreciated
You're welcome. Thanks for watching and I'm glad you enjoyed it.
thanks for posting this!! working on an LS1 swapped 1988 nissan sentra notch back.
I'm glad that you liked it. Thanks for watching and commenting.
You can select a symbol instead of status LED and select the Left/Right arrow and change the color to green. Just an FYI, great video!
Good to know, I'll keep it in mind if I ever change the layout. Thanks, I'm glad you liked it.
Always great information
I'm glad you enjoyed it, thanks for watching.
Thank you for making this video. Very helpful.
You're welcome, I'm glad you enjoyed it. Thanks for watching.
Man you are helping me alot with this thank you
Absolutely, that's why I started this channel, to help share knowledge. Thanks for watching and commenting.
awesome video! this will be super helpful 🤘
Thanks for watching, I'm glad you liked it.
Also, what cable is used to hook the gauges to a lap top? the USB to CAN which came with the gauges or just a USB to USB cable. My old eyes dont like the small lettering on the gauge setups and would rather use a lap top. Thanks again man and keep the videos coming.
So I am new to the Holley gauges and have the Terminator I will eventually switch too. I have been watching your vids and find them very helpful. Can you tell me which pin to use on the 6.86 for the tach input? I have the 6014 MSD but I am unsure of which pin to use to get the tach in the gauges to work. Thank you for the great vids and keep them coming!
Thanks for watching and commenting.
IO 11, 12, SPD 1, and SPD 2. Those inputs are in pins 23, 32, 33, and 3r respectively. I hope this helps.
Good video, thanks!
Thanks for watching, I'm glad you liked it.
Thanks for the video. Maybe I missed it, but how were you able to use a mouse with your pro dash?
Thanks for watching. It's just a cheap USB mouse that I got at Walmart, I removed the thumb drive and plugged the mouse into that adapter cord that plugs into the USB-C ports in the back of the dash.
That's awesome you doing this to help people. Question the in/outputs can they be used with the terminator x max ecu
With a software upgrade on the Terminator X and the Pro Dash, yes.
Thanks for watching, I'm glad you enjoyed it.
How do I hook up my boost vacuum gauge stand alone pro dash
Give me a little time tomorrow to do some research and I'll answer your question. It's not hard, I just want to ensure I give you completely accurate information.
I’m looking to buy the 7” dash. Do it come with the wires for this hook up? I’m running a Holley sniper efi system already.
I don't have any experience with the 7", just the 6.8". The dash did come with the main harness, which has the power, ground, CANbus. It also came with a USB-C to USB-A cable which is used for a flash drive to log, transfer files (like how I made the custom background), or use a mouse to aid in configuring the dash. The 6.8" also comes with a GPS antenna and the coaxial cord for that. Anything else is extra and does not come with the dash.
@@TrailerParkMotorsports so u purchased a separate wire to hook up the blinkers? Bc I have a few extra I/O wires that come off the main harness to the ecu (sniper efi) but not sure if I can use those
I used this kit for the IO wires. The pins can be purchased in bulk as well, I just keep forgetting about them.
www.summitracing.com/parts/hly-558-420
What size barrels fit into the holley harness?
How about a high beam indicator? Can you do a vid on that just for shits n giggles
I suppose I could.
Take a look at this. You might see something familiar.
th-cam.com/video/O6u9qXDz4nc/w-d-xo.html
What's up bro , am having troubles with the tach , it flickers and I installed a tach conditioner and helped alittle . Any help would be awesome
Do you mean the tach that is an RPM gauge on the prodash, or do you mean tack as in an auto meter or other aftermarket brand tach?
The 7" holley dash
Your led’s were blinking- couldn’t you just use them for turn indicators or flashers?
I could, but the steering wheel blocks them.
Trailer Park Motorsports I want to use them1&4 for turn, 2&3 for hazard. Can u set up led inputs in the screen menu? I just got the dash and am wiring my car interface. I like your vids- straight and to the point
Thanks for watching, I'm glad you enjoy the videos.
I'm sure that you can, it's just not something that I've tried. When I turn on the hazards the same indicators flash as the turn signals. I essentially just replaced the bulbs in the stock cluster for the indicators on the dash.
Trailer Park Motorsports thanks, man!
You're welcome
Sound like you got a pretty mouth...
Lmao
Pro nouns 😂
I forgot I said that. Thanks for watching.