Tips on Mortise Cylinder Locks and tricks to Installation them

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ธ.ค. 2024

ความคิดเห็น • 5

  • @doorandlocktips
    @doorandlocktips  2 หลายเดือนก่อน +3

    Tips for installing a Schlage SC1 deadbolt lock cylinder
    here is all you need to know about (RCK) Residential Construction Keying in a Schlage SC1 lockth-cam.com/video/p8aDlkrb4Es/w-d-xo.htmlsi=vCwgnPtcrmwZsOxP
    “Macs adjacent cut” Chart for the USA lock brands:
    th-cam.com/video/p8aDlkrb4Es/w-d-xo.htmlsi=BsbPt...​
    How to troubleshoot common problems with a Medeco M3 Bilevel Mortise Cylinder
    Here’s the answer from Medeco all the cuts have to be on AFT cuts M,D,S for this to work with bilevel. That being said, the face of the plug is thicker on the bilevel, than the thinner biaxial.
    Bilevel holds the key out further from dead center of the chambers and Pin tip so the tip of the bilevel pins which are all conical and the back of the AFT cut brings the resting Bilevel pins up to the sheer line the extra 5000"s that they need to achieve sheer line height also the housing is the same length as the biaxial the big problem with having all AFT cuts is if you never set up your master key system in the first place to incorporate bilevel cylinders and you only used Fore an AFT cuts mix, or all Fore cuts.
    The conclusion, if you were thinking of incorporate bilevel more economi call cylinders in the same system as a biaxial at a later time. The two systems can work together seamlessly if you use only AFT cuts in the first place on all keys. this will Allow the bilevel to incorporate seamlessly in an existing biaxial system.
    How to replace a Schlage SC1 deadbolt lock cylinder
    How to remove the old cylinder
    How to install the new cylinder
    How to fix the 'no bolt' issue
    Tools and materials needed
    Phillips head screwdriver
    Needle nose pliers
    New Schlage SC1 cylinder
    Common problems with Schlage SC1 deadbolt locks
    'No bolt' issue
    Keypad not working
    Lock not turning
    How to prevent future problems
    Use a high quality lubricant
    Keep the lock clean
    Replace the cylinder if it is damaged
    Where to buy replacement parts
    Amazon
    Home Depot
    Lowe's
    Pinning Medeco Mortise Cylinders
    th-cam.com/video/EkuVkYgZdfQ/w-d-xo.html
    These are all things you need to know:
    Medeco bilevel vs. biaxial key cylinders: a comparison
    Comparison of Medeco bilevel and biaxial key cylinders
    Medeco bilevel key cylinder
    Keyway comparison
    How to pick Medeco bilevel and biaxial key cylinders
    Picking Medeco bilevel key cylinder
    Picking Medeco biaxial key cylinder
    Non-destructive entry
    Medeco high security keyway
    Medeco high security keyway
    Medeco HSK
    Medeco Rapi-Lock
    Where to buy Medeco key cylinders
    My Lock Dreams That Come True🔐
    I love locks and I think you will too! Various forms of lock picking shimming and lock pinning!
    not to mention all the alternative ways to get through a door opening is always fun. It all just sends quivers up and down my spine. If you're like me and you love to pick open or get locks open this is The locksmith Channel for you. If there's anything on your mind please leave a Comment. I will answer all comments as I receive them so expect a quick response! Ask any question in regards to locks doors or Lock hardware.
    Sincerely,
    Michael Walker
    Oh I almost forgot
    Door and lock Tips of the day🔐
    Schlage Kwikset Sargent and Yale locks should be used on all your own front doors. It makes the lock Picking professional Lishi User and criminals have a hard time Picking any of these locks. The only best way to stop brute forced entry is by using a good surveillance camera System.
    Subscribe to my locksmith channel to learn more🗝
    Enjoy The Show
    Warnings and disclaimers
    - This video is for educational purposes only
    - The video creator is not responsible for any damages caused by following the instructions in the video
    #locksport #locksmith #hacke @youtubecreators #TH-camHighFive

  • @LCLockout
    @LCLockout 2 หลายเดือนก่อน +3

    I think I’ve asked about this before but still trying to wrap my head around it. Is saving new pins something you do professionally or is that a tip for locksport? 8 1/2 cents is what I’m calculating for those pins, and it seems the off chance you lose a pin, fumble & drop/mix up, or need to dig into your pinning tray I would think would off set the benefit of having a single lock rekey set up. I haven’t tried it yet so all hypothetical just curious if it is something you used to do in the trade and it worked? Makes perfect sense for locksport though. Anyways thanks for the awesome video, still working through it might have more comments to come.

    • @doorandlocktips
      @doorandlocktips  2 หลายเดือนก่อน +2

      The beauty of the video camera it takes great close-ups I mean, stupendous and shooting a close-up of small bottom pins all laid out on scotch tape. It just doesn’t get any better than that. Does it? I would almost think this is a priceless shot of video. wonderment if the idea works in practice Who cares it’s the video photography that the TH-cam viewer is after these type of close-ups draw the Locksmith community in like lights to a bug I guess is it practical it’s kinda like saving rubber bands or twisties plastic bags and the like somehow it just makes me feel better to have those pins at my-beck and call
      ☎️
      All humor aside and this is the truth. I’ve never used a single one of those keys or the pins that are taped to them, but I have them in a drawer just in case.😂❤❤❤❤❤

    • @LCLockout
      @LCLockout 2 หลายเดือนก่อน +1

      @@doorandlocktips okay, I believe I understand now, thanks. Definitely draws me in that’s for sure 👍

    • @doorandlocktips
      @doorandlocktips  2 หลายเดือนก่อน +2

      ☎️
      All humor aside and this is the truth. I’ve never used a single one of those keys or the pins that are taped to them, but I have them in a drawer just in case.😂❤❤❤❤