Overengineered 3D printed and CNC milled thing called PCBBQ - but what is it? #1 | makermoekoe
ฝัง
- เผยแพร่เมื่อ 17 ธ.ค. 2024
- This video is sponsored by PCBWay. Get your own prototyping PCBs starting at 5$ here: www.pcbway.com...
PCBBQ - an automated hotplate soldering station based on a little stove top. Controllable with a DIY WiFi remote based on an ESP8285. This thing can lift the milled aluminium top up and cool it from underneath with those fans so that the baked PCB can stay on the plate during cool out phase. Stay tuned and subscribe to see this thing in action!
The build is not complete yet. The mains wirings for the stove itself is missing, the temperature sensor on the milled top is not installed and the base of this thing isn't milled yet. Once this is done it is time for the first test!
I'm now on Patreon! Your little help is appreciated a lot! Check it out here:
/ makermoekoe
Links:
Website: www.makermoeko...
Instagram: /
Patreon: / makermoekoe
My commonly used tools:
My camera equipment:
Camera: amzn.to/35sIGeg (*)
Microphone: amzn.to/3aZm2vq (*)
Camera clamps: amzn.to/2zUBYSF (*)
Mini tripods: amzn.to/35vCoe2 (*)
LED panel: amzn.to/35tbgfG (*)
*affiliate links.
Music from:
www.epidemicso...
Oh look, it’s the thing from the thumbnail!
And it’s made of parts, I never would have guessed that!
Looks very great.. Could you please add a video where we can see it in action? 🤔
For that it would need to work..
@@Marvin-of3rt 😅😂
Looks like an automated reflow plate to solder boards. It can lower the pcb into the heating element, do the full soldering cicle, then lift it up and cool it down with the fans.
Am I right?
Totally correct 🙂
@@makermoekoe I wonder if there is a scheme of the input circuit to control the box
@@makermoekoe would have been nice to actually show us and tell us that
Your work inspires me bro❤❤❤❤
Finally someone use pillow block bearings!! Nice project!
Puts a question in the title, doesn't even answer it...
PCB heated reflow height adjusted plate.. 😂
Used for soldering components via paste to the board
I was wondering how are called the "clamps" used at 12:47 or where I can find them...they seem a must have
Exactly, these is an Omnifixo! Very helpful is almost any case. Even without the magnetic base very useful - as shown in this video 😁👍🏻
Очень интересно..но..есть одно маленькое но...как работает,что делает?
Till the last minute I thought this was some kind of Barbecue grill
a modification here or there and it still could be
Can't wait to see the entire thing in action. Great job!
Impatiently waiting to see it in the action
Hotplate, fans and a lowering/raising mechanism. Hmm, is it an automatic reflow soldering plate?
This was really well done. Thank you for creating and sharing it! (Edit) Oh pick and place video? Yes please!!
Overengineered hotplate? Hell yes sign me up!
Hello, I like all the projects you have done! I'm trying to build my own reflow controller and I like the software you use on your iPhone to control this device (you can see it in your other videos). Could you share the firmware? thank you so much!
I had to see it working
Love your filming and editing style, great work
Music is always garbage though, he never speaks so I turn the sound down 😂
@@travismiller5548 hah, didn’t bother me as bg music, what track would you use?
That is where opinions differ 😁
Really cool. What did you use for the 3d prints? Won't PLA deform from the radiated heat?
I use pla in a few heat sensitive applications, they work fine for ~6 months or so
Oooooh man, epic content mate. Wohooooooo love it. Unbelievable
Thanks brünchen! 😁
Mixing different types of screws. I love it 😂😬
Amazing as always 🤩🤩
Thank you!!
What is this madness... Looks cool
So fun watching this build while wracking my brain trying to figure out what it was.
Your CNC router didn't seem to spray the swarf all over the place! Does any air come out the bottom of your spindle? Mine paints the room with chips.
That thing is beautiful! Great work
Is that a barbecue for pcbs?
Indeed 😁 PCB + BBQ 😵
where do we find a parts list??
which connectors have you used on the red PCB? XH?
Hi, how will U know Temp of PCB board (reflowing) ?
You should have put ferrules on all the multicore cable though. Other than that, nice build.. I had trouble figuring out what the actual thing was, but after clicking the show more it all became clear :-) You didn't get any deformations in the printed parts due to heat?
Hi, thank you so much @MakerMoekoe, where's part 2? is your website working?
Hi, can you provide the cut files for the metal plates please?
I think this is a device for brewing coffee in Cezve. You can make a good turkish coffee.
Can you share more details of this
In the segment where it's mentioned "Hardest part", instead of holding it using your fingers you could alternatively use a 3mm or 4mm nut driver. It comes in various lengths. Can buy one which suits you're requirement. 🙂
true, or just put the nut on the other(easier to reach) side.
Is that a pcb barbecue?
Is it hydrocoptic Retro Encabulator with reflow megaturbo quadro spring-e-lyzer...
That was a whole lot of foreplay without swing if run! I’m going to need to take a cold shower tonight.
Very nice project.
are you going to control the temperature on the pcb by adjusting the distance between the heating element and the pcb?
The heating element is controlled by the solid state relay and a pid controller. The lifting plate is for the cool down phase 👍🏻
@@makermoekoe It's smart how you minimized the amount of mass that needs to be cooled down!
So.... it’s not a PCB barbecue?
Honestly have no idea what that is but it seems im not the only one that moved to mechanical stuff from electronics :)
Well, it is just a tool to bake electronics stuff 😁😁
@@makermoekoe Yeah I figured its something around thet form the PCBBQ😁, nice work
By the way, I loved your tools!
Мужик, всё зачОтно и красиво. Но блэт.. где испытания?
And the second part? I wanna see what it do? 😁😁😩😩😩
Amazing work! 👍🏻 It’s cool 😎
A great way to make contents. Infinite contents
Object ID unknown, but this was a very entertaining video. I had a pretty good day today, and I think this was still one of the brightest spots. :))
Wow thank you for those words! 🥰
Printed Circuit Board BarbeQue. For PCB soldering
Does it work ? Want to see it in action.
I don't quite get what this machine does, please someone can explain me??
Looks like those turn tables you use to showcase a product with a 360 view of it!
Edit: wait nvm it looks like motor is providing rotation motion into vertical one. I have no idea lol
High-voltage transistor ?
I would love to see a video on the pnp. Im currently building one myself, the index pnp.
How long did it take to print the large base for this project? Must have taken ages...
Weiter so!
Nice build! Can’t wait to see it inaction. Hope that video shows the desired and actual temp profiles
verry good work. thank u for sharing
Copper for the top plate?
15 minutes of my life I'll never get back
Im early, really early. Love your video's❤️❤️
Thanks!
The best phillips screw driver is a flat head screw driver
can you make a video that how it works
Well, that is one sure fire way to get viewers engaged :D Well played!
Heard of sand in a pan on a hotplate? Yeah.
Its been 3 months , you didn't tell us what exactly you made this for ....waiting for it
Have you figured out what it does? :-)
What’s that 4?
You need to add a section of video where you should it actually functioning for which it was designed otherwise it defeats the purpose.
HOLA, TU INVENTO ME GUSTA MUCHO, SE PUEDE REPLICAR PARA HACER POPCORN??
ESTARIA GENIAL.
SALUDOS.
So, it's a vinyl player, right? ;)
11 months later and we're still trying to find out what it actually is. :)
So what is it?
truly overengineered
That was the plan 😁
It's a hamburger press. I figure the SSR will control a heating element.
but you didn't show it working ...
What is it?
And also part list circuit diagram and code
How not to do a video on TH-cam, no explanation of what it is or what it does.
Just a guess, but it is very likely to be a pcb oven for smd soldering, don't you think?
Agree completely. Even fast-forwarding, there never was sny informaton provided. Producing idiotic videos like this should be a criminal offense!
2 hints. #1 Read the description below the video. #2 the nearly black plate with the concentric circle pattern in the middle was acquired from a disassembled old electric kitchen stove.
Maybe...resin 3d printer for PCB? ;)
Nice video :), thanks
like from the heart is a dream for me, a cool thing!
it's an alarm clock isn't it?
Sooooo, what is it?
Лайк если тоже не понял что это за херня
Popcorn maker?
I should try this heh? 😁
Yeah
But what it does?
Dude, this thing is falling apart nearly as much as my life
Какая-то непонятная хрень, зачем это нужно?
PCBBQ- Politically Correct Barbecue
Que lindo para que sirve?
You rock!
Keep it up👍
Ótimo muloco e brabo
Что это такое и что с ним делать?
Я только зря потратил время на просмотр.
che caz é sta roba?
😍😍😍
Sorry what?
"Overengineered 3D printed and CNC milled thing" *let's install Phillips screws with a flat screw driver...*
And why no SHCS everywhere?
Это стол для пайки.
Vai ar kaj ki
Coffee maker .. I know it
Print another 3D printer with the 3D printer..
супер. успехов вам
Por fazer algo magnético ar movimento infinito