35% Terache Gear Reduction. It turned them decent in this pretty thick clay! But you got to remember the 500 has a lower first gear than the 420 and lower secondary gears from The factory
what gear reduction should be in that 300? my 300s setup the same with about 2-3 inches of lift and 28 aztex, i can turn them surprisingly well, id almost wanna say better than in this video for some reason, but just wondering what would be my best option, was thinking 40% might be just a hair bit too much
@ yea that’s what i was thinking maybe, do you still have to do all the grinding on the inside with the 18%? I know reduction boss makes a 25% and was considering that too
Been there done that. Bkts and Havoks didn't pull nearly as hard as Aztex. Portals are too heavy for a quad, ruined it for trails. Also destroyed the frame tabs. Maybe if someone made a lighter portal that didn't add 4" to each side of the machine
@@hunterhogan07 oh I thought you were referring to the Rubicon. Same argument applies, adding that much weight to a pioneer 500 makes it unacceptably slow slow for me. But I might get around to it eventually just for the views LOL
@ lol in my opinion they look mean on portals I’m just trying to figure out what gear reduction to put in the motor. I rlly want to do the terache because it seems like better quality and comes in a lot cheaper I just don’t know if it will be enough
Got a 22 pioneer 1000-3 on them tires, you can’t beat these tires 😬💯
Yes u can Aztex
I got a question i new you use two or still do mess with the 300s where did you get the 424s fwd disconnecters from i been looking everywhere
Those were discontinued years ago. I bought three about 6 years ago and I'm out of them now
Finally another p5 vid
Just been having way too much fun on the Foreman LOL
Hey mudpuppy, i was wondering if you could fit 32in Aztecs on a stock foremen 520
Yep. With 5+2 offset easy. 4+3 will require a bit of trimming
@ so 10mm offset would just be a little bit more trimming then 4+3
@THAATCLAPPED350 correct
Got a question mud puppy what size outlaw tires can i fit on a Honda fortrax 300 its a stock 300 just wondering thx
You can generally fit up to a 31 outlaws by just bending brackets and trimming.
@MudPuppyOffroad thx man but I kinda am not wanting to cut plastics I don't care about bending stuff just the plastics are original
The poor 300 clutch. Lol. Hope they got one of those coming too
Oh yes. Brain loves changing clutches lol
so the orange bike has a 20% gr and can turn 33s????
35% Terache Gear Reduction. It turned them decent in this pretty thick clay! But you got to remember the 500 has a lower first gear than the 420 and lower secondary gears from The factory
@@MudPuppyOffroad so he switched from a 20% to a 35%
@@ReeseWalker-g9w correct
what gear reduction should be in that 300? my 300s setup the same with about 2-3 inches of lift and 28 aztex, i can turn them surprisingly well, id almost wanna say better than in this video for some reason, but just wondering what would be my best option, was thinking 40% might be just a hair bit too much
We're gonna do an 18% much cheaper and won't kill the speed. Cody Scrivener still makes them I think
@ yea that’s what i was thinking maybe, do you still have to do all the grinding on the inside with the 18%? I know reduction boss makes a 25% and was considering that too
@itsgatlin4035 no grinding for the 18% that I recall
Yoo whattt bro whennn!!!!
I texted you! Monday morning
Poor little 300 was struggling.
Gear reduction was ordered the same day LOL
@MudPuppyOffroad definitely needed.
You think 45% in portals and 35% in motor will spin a 38-10-20 bkt
Been there done that. Bkts and Havoks didn't pull nearly as hard as Aztex. Portals are too heavy for a quad, ruined it for trails. Also destroyed the frame tabs. Maybe if someone made a lighter portal that didn't add 4" to each side of the machine
They are going on a 2017 p500 may end up swapping just got a good deal on them
@@hunterhogan07 oh I thought you were referring to the Rubicon. Same argument applies, adding that much weight to a pioneer 500 makes it unacceptably slow slow for me. But I might get around to it eventually just for the views LOL
@ lol in my opinion they look mean on portals I’m just trying to figure out what gear reduction to put in the motor. I rlly want to do the terache because it seems like better quality and comes in a lot cheaper I just don’t know if it will be enough
@hunterhogan07 I'm testing a 60% Terache rn. Don't have an ETA on when we will be selling them though
100th like