Thank you Very much!! I am a new to fixing appliances and this is the most informative channel by far. All I can say is thank you 🙏 Y’all are Truly a blessing.
Thank you for thoroughly explaining a sealed system. It is one they I always wanted to get in but been hesitant to do so. Looking forward for part 2. 👍
fellow employee who is a refridge tech said on newer styles its always the compressor when an ice ball is formed on top of evap. he always whips out his watt meter to condemn compressor. he seldomly cleans dirty coils.
Thank you for the great content Richard! I just started the video but I'm sure it's full of valuable info just like the rest of them! Are there plans for online courses (in depth) for sealed systems? If so when and what would be the ballpark for the cost? Really looking forward to something like that. Keep up the great content!!!
I think the best way not to come back for redo, just replacind compressor, evaporator and heat exchanger, that's it. System gonna be brand new and no call backs.
thank you for your lesson , i have samsung double door fridge , want to know when i start my fridge the fridge will start or my freezer will start, and how to find fault with the system ,how the capilary tube is diverted between freezer and fridge in double door fridge
Either a restriction or low in refrigerant, and sometimes an inefficient compressor, adding a little refrigerant to see if pressures normalize in the system will show it was low on Freon if refrigerant is added but frost is still evident at the capillary entrance then is a restriction in the capillary tube.
Appreciate it very detailed explanation, one question sir if most likely restriction is in filter what is recommended temperature difference in & out of the filter to separate the problem, thanks
Sorry for the delayed response, I did not see this question. The temperature and pressure in and out the filter should be the same, the filter is not there to create a pressure difference. Now if there is a temperature pressure difference in the filter that would indicate the restriction is in the filter.
Is there a way I can find out what model lfx25991st pcb bords are compatible with other LG models. Trying to find a free one with a bad condenser so I can get the pcb from to fix my refrigerator
@@TMMApplianceRepair bro i aint going to lie ..i know how to train people and in was listening to the students. So i thought i could probably train them but then i saw how to professors get down....and its a little more than i could do...im sure with a little guidance if needed I could be an instructor to a complete novice..but them teachers could teach they ass off no lie.. i do have to work on certain but we all do. Also the content is king bro.. just found u
the pictures of the evaporator with different problems showing different frost patterns was very helpful
Thank you Very much!! I am a new to fixing appliances and this is the most informative channel by far. All I can say is thank you 🙏
Y’all are Truly a blessing.
Thank you for thoroughly explaining a sealed system. It is one they I always wanted to get in but been hesitant to do so. Looking forward for part 2. 👍
This is gold for all technicians.
this is platinum information here .
Why?
This is gold information thank you
Excellent. Thanks for sharing
Good video, there should be checking compressor current draw in step 1 though
The pictures of the evaporators and description under each image was created by me. You're welcome!
I thank you for that.
fellow employee who is a refridge tech said on newer styles its always the compressor when an ice ball is formed on top of evap. he always whips out his watt meter to condemn compressor. he seldomly cleans dirty coils.
Thank you for the great content Richard! I just started the video but I'm sure it's full of valuable info just like the rest of them!
Are there plans for online courses (in depth) for sealed systems? If so when and what would be the ballpark for the cost?
Really looking forward to something like that. Keep up the great content!!!
I think the best way not to come back for redo, just replacind compressor, evaporator and heat exchanger, that's it. System gonna be brand new and no call backs.
You forgot the filter drier lol
Ok. Coil is not frozen. In freezer. But line above it to coil is frozen.
thank you for your lesson , i have samsung double door fridge , want to know when i start my fridge the fridge will start or my freezer will start, and how to find fault with the system ,how the capilary tube is diverted between freezer and fridge in double door fridge
vhery. nice. video. thanks
vhery. vhery.. thanks. from. Indian. Tech. Maharashtra.
i have a frost buildung up at where my suction line meets my capillary tube near my evaporator. does this indicate a restriction?
Either a restriction or low in refrigerant, and sometimes an inefficient compressor, adding a little refrigerant to see if pressures normalize in the system will show it was low on Freon if refrigerant is added but frost is still evident at the capillary entrance then is a restriction in the capillary tube.
Appreciate it very detailed explanation, one question sir if most likely restriction is in filter what is recommended temperature difference in & out of the filter to separate the problem, thanks
Sorry for the delayed response, I did not see this question. The temperature and pressure in and out the filter should be the same, the filter is not there to create a pressure difference. Now if there is a temperature pressure difference in the filter that would indicate the restriction is in the filter.
Is there a way I can find out what model lfx25991st pcb bords are compatible with other LG models. Trying to find a free one with a bad condenser so I can get the pcb from to fix my refrigerator
Every house has a kettle.
Kettle water melts ice
LOL! i wrote my last comment before you showed the steamer.
What pressure should the low side read
Mo
How to fill the gas to refrigerator coil and freezer coil
with all the tech knowledge this guy has i'm surprised they didn't tell him he doesn't need to hit space bar with a hammer to activate it.
You need any instructors or help in anyway.. nyc.. full time tech..
I'm a keep that in mind brother... I'm from and visit NY all the time
@@TMMApplianceRepair bro i aint going to lie ..i know how to train people and in was listening to the students. So i thought i could probably train them but then i saw how to professors get down....and its a little more than i could do...im sure with a little guidance if needed I could be an instructor to a complete novice..but them teachers could teach they ass off no lie.. i do have to work on certain but we all do. Also the content is king bro.. just found u
Good video, but who farted lol
A $30 dollar steamer from Amazon works 3 times faster than a hair dryer. (and it's more fun).
AMEN! The WAGNER large capacity steamer is my choice of weapon!
And it won't melt the inside of the cabinet.. Some companies won't even touch a fridge if they see someone melted the liner with a hair dryer
What pressure should the low side read
Mo