I know it is more expensive, but I buy the premixed cans of 50:1 fuel. One reason is the is less spillage pouring from the 50:1 cans is easier than from a gas can. The fuel tank openings are small on chainsaws and adding fuel in the woods on uneven surfaces is not always easy.
5 liters of petrol and 100 milliliters of oil makes 50-1 ratio. One liter gas would be 20 ml of oil. One US gallon of gas takes 2.5 US ounces of oil for a 50-1 ratio.
Another good method for mixing the gas/oil: Buy a 1.5 Gallon gas can, pour the oil in. Go to the gas station and let gas pump do most of the work in mixing it. Then, you can further ensure a good mix like the second part of the video. Because the can is 1.5 gallon instead of one gallon, there is room to for the fuel to move.
reid anderson I have the 353 as well but mine does not have the manual air purge bubble/pump ... and it’s always difficult to start if I haven’t started in a while because I have to pull a lot until the fuel reaches the carburetor... does your have the air purge bubble? Just curious
Bryan Burbank I see it has been over 2 years since you posted this but, what do you suggest we do if 100% fuel in 89-93 octane isn't available? I hate ethanol in the fuel and know what damages it can cause. all I have here is regular fuel that's 100%. 15% ethanol in everything else. I've tried 87 100% gas but my saw and weed eater were lacking in top end performance. would you trust using additives in 2 cycle engines that remove ethanol? thanks for any help
Additives can be effective but I wouldn't trust them for long term storage. Maybe a few months or more. Google non-ethenol fuel stations and see if you can find something nearby or buy the smaller cans at home depot or Lowe's. Most saw shop sell small cans too
Feel free to take a look at the operating manual to learn more about your Husqvarna Chainsaw, starting on page 24. If you have any other questions, we're here to help! You can find the manual here: pdf.lowes.com/productdocuments/8cab07d1-4b3f-4318-b5b2-2a1edf9eec4a/11478546.pdf?_gl=1*17vi8pl*_gcl_aw*R0NMLjE3MzIwNDM0MzYuQ2owS0NRaUFpX0c1QmhEWEFSSXNBTjVTWDdxSUtyWGs2ODN5WHRCOThCSzZQTzNEMVpBb1c3N2poWXJab0N6RkpfeDdCUldwS1paUEwzRWFBZ18wRUFMd193Y0I.*_gcl_dc*R0NMLjE3MzIwNDM0MzYuQ2owS0NRaUFpX0c1QmhEWEFSSXNBTjVTWDdxSUtyWGs2ODN5WHRCOThCSzZQTzNEMVpBb1c3N2poWXJab0N6RkpfeDdCUldwS1paUEwzRWFBZ18wRUFMd193Y0I.*_gcl_au*MTI0MDY5MjI1MC4xNzI4Mzk4NTc5.
Kirk king/cunningham more common chain saw spec is fuel ratio (50:1) vs size or gas tank - are you wondering about tank size on specific saw in video? Thanks for watching our TH-cam channel.
You will destroy the engine. 2 stroke engines get their lubrication from the oil in the gas. 4 stroke engines have the oil in the crankcase so there's no need to mix it for a 4 stroke.
Mel Pancho: How does 76.891mls of oil to 1 litre (1000 mls) of fuel equate to a 50:1 ratio? That is a 13:1 ratio. It should be 20mls oil to 1000 mls fuel. Get your facts straight before coming on line and misleading everyone. Idiot.
Just bought a Husqvarna 350 rancher. The designer who came up with this choke High idle lever is a moron. This thing starts terrible. Even when it's hot sometimes I have to pull two or three times.
I have had my Husqvarna for 27 years now and it still runs like a dream.
20ml x 50=1000ml = 1 litre
I just have one and I don't want to brake it.... What fluid should I use and how much please 🙏
Always use Ethanol Free Gasoline for chainsaws.
@@mikeheesen1031 ethanol gas will gel up the carburetor.
Great video! It answered in the best manner and I clearly understood the entire instruction. Thanks!!!
zvscaffeeoiicd
2 stroke engines love premium
They love premium not ethanol they hate ethanol premium at least the carb does
I know it is more expensive, but I buy the premixed cans of 50:1 fuel. One reason is the is less spillage pouring from the 50:1 cans is easier than from a gas can. The fuel tank openings are small on chainsaws and adding fuel in the woods on uneven surfaces is not always easy.
Excellent saw
5 liters of petrol and 100 milliliters of oil makes 50-1 ratio. One liter gas would be 20 ml of oil. One US gallon of gas takes 2.5 US ounces of oil for a 50-1 ratio.
What's petrol? Is it short for petroleum?
@@aperson4933 usually Canadians call gasoline petrol ⛽️
Thanks man
Bloody legend thanks 👍
@@SquareDancevideos1 so does the rest of the world except the usa
I have Husqvarna 372xp..always engine damage please help me
Another good method for mixing the gas/oil:
Buy a 1.5 Gallon gas can, pour the oil in. Go to the gas station and let gas pump do most of the work in mixing it. Then, you can further ensure a good mix like the second part of the video.
Because the can is 1.5 gallon instead of one gallon, there is room to for the fuel to move.
I own this chain saw...and it never started!
353 husky, best saw I've ever owned
reid anderson I have the 353 as well but mine does not have the manual air purge bubble/pump ... and it’s always difficult to start if I haven’t started in a while because I have to pull a lot until the fuel reaches the carburetor... does your have the air purge bubble? Just curious
k970 I need choose which one oil the make gas
Can a another brand of oil damage my Husqvarna chainsaw??
I use regular oil i put in my car (5W-40) and it works fine. Any kind of oil is better than no oil, just dont use dirty used oil
Run ethanol free gas and you dont have to worry about long term storage, just re-shake the saw before starting.
Bryan Burbank I see it has been over 2 years since you posted this but, what do you suggest we do if 100% fuel in 89-93 octane isn't available? I hate ethanol in the fuel and know what damages it can cause. all I have here is regular fuel that's 100%. 15% ethanol in everything else. I've tried 87 100% gas but my saw and weed eater were lacking in top end performance. would you trust using additives in 2 cycle engines that remove ethanol? thanks for any help
Additives can be effective but I wouldn't trust them for long term storage. Maybe a few months or more. Google non-ethenol fuel stations and see if you can find something nearby or buy the smaller cans at home depot or Lowe's. Most saw shop sell small cans too
Bro just use VP Small engine gasoline which is 94 octane and contains no alcohol. VP actually makes pre-mixed 50:1 Two Stroke gasoline.
I have a old 55 rancher had no problem starting it . Work like a horse . I miss that saw cause new model are not made same way.
Many thanks for our trimmer 323r!
I have husqvarna chainsaw but I don't know how to operate it
Feel free to take a look at the operating manual to learn more about your Husqvarna Chainsaw, starting on page 24. If you have any other questions, we're here to help! You can find the manual here: pdf.lowes.com/productdocuments/8cab07d1-4b3f-4318-b5b2-2a1edf9eec4a/11478546.pdf?_gl=1*17vi8pl*_gcl_aw*R0NMLjE3MzIwNDM0MzYuQ2owS0NRaUFpX0c1QmhEWEFSSXNBTjVTWDdxSUtyWGs2ODN5WHRCOThCSzZQTzNEMVpBb1c3N2poWXJab0N6RkpfeDdCUldwS1paUEwzRWFBZ18wRUFMd193Y0I.*_gcl_dc*R0NMLjE3MzIwNDM0MzYuQ2owS0NRaUFpX0c1QmhEWEFSSXNBTjVTWDdxSUtyWGs2ODN5WHRCOThCSzZQTzNEMVpBb1c3N2poWXJab0N6RkpfeDdCUldwS1paUEwzRWFBZ18wRUFMd193Y0I.*_gcl_au*MTI0MDY5MjI1MC4xNzI4Mzk4NTc5.
Is 40 two 1 two rich
whats the size of the gas tank on the chain saw?
Kirk king/cunningham more common chain saw spec is fuel ratio (50:1) vs size or gas tank - are you wondering about tank size on specific saw in video?
Thanks for watching our TH-cam channel.
So I cannot use the mixture ratio in my husky that i use in my weed eater brand "weed eater"?
Just purchased my first chainsaw. All these "may cause fatal injuries" and that chainsaw magician accident has me worried. lmfao
Did you ever hurt yourself? Just bought my first
Too much oil in gas: What to do?
mix with more gas to dilute it dumdum
i own this chain saw...love it..!
i don't get why you put chain oil in the gas tank...
Never use chain oil in your gas always use two stroke oil in your gas for the chainsaw
I have a Husqvarna 465 and it took me 8 years to know how to start the thing im happy now but my right arm is 5 inches longer than my left
I have Husqvarna Sm 125 help me
What happens if i put straight gas into the chainsaw an then use it ?? What would happen if i done that
BAM HAMMER it would prove that you’re a moron...
Falli g big tree
boom
You will destroy the engine. 2 stroke engines get their lubrication from the oil in the gas. 4 stroke engines have the oil in the crankcase so there's no need to mix it for a 4 stroke.
Nice to know
Mike Rowe???
no ,not him. just a similar voice
?One liter petrol . how much oil needs
One liter petrol how much oil needs?
Petrol? Huh?
20 ml oil to 1 liter petrol! Your ratio would be around 12 to 1 and we need 50 to 1!
Does that jug look like a 1 liter jug to you?
76.891 ml oil/ 1liter petrol, but makesure you put unleaded patrol - otherwise it'll damage the chain saw.
Mel Pancho: How does 76.891mls of oil to 1 litre (1000 mls) of fuel equate to a 50:1 ratio? That is a 13:1 ratio.
It should be 20mls oil to 1000 mls fuel. Get your facts straight before coming on line and misleading everyone. Idiot.
No, always use ETHANOL FREE gasoline.
I use diesel
PLEASE STOP with all the safety warnings. I'm not a 12yr old who's never run two stroke equipment before. Just get right to the point.
You have an 8 yr old’s temperament. Just fast forward.
Just bought a Husqvarna 350 rancher. The designer who came up with this choke High idle lever is a moron. This thing starts terrible. Even when it's hot sometimes I have to pull two or three times.
that 🐄💩 we have already self mixing 2T oil 🤦
K