Great video Ben, thanks a lot. I believe that based on what was discussed in the video, I'm gonna go and change my cold audience ads to learn more and retargeting ads to shop now as I'm selling an online course.
Thanks Ben! Can we test three different CTAs in three different ads under the same ad set to understand which CTA's works best in case of a Direct offer ? Thanks in advance
Ben, great video as always. What if the objective we want is purchases, but we’ll never be able to get out of learning limited because the budget won’t allow? I know you said we should teach FB to get purchases, but it seems impossible to get enough data that way. Talking about $50/$100 a day budgets. Thanks in advance.
That scenario isn't perfect but I would continue under it because you won't see better results from a different set up. Increasing the budget to get more conversions is likely to increase your cost per conversion. I wouldn't scale just to get out of learning limited.
Hi, Ben, appreciate your content. I have a question. So I am currently running direct offer campaigns (Promotional mass products) to a cold audience and am using the 'shop now' button. I am noticing an increase in CPC and low-clicktrough rate. Is it a good idea to test the learn more button? I am thinking that because its a cold audience the CTA should be 'learn more'.
I think they got rid of the option to have no buttonn which is very uncool if you have it built in to your creative video. The whole ad should be clickable I believe. Any knowledge on how not to have that on there? It really messes up the ad creative I paid good money for.
Hi Ben, thanks for all the excellent content on your channel. I have learned SO MUCH. The organization that I work for has several people who have access to run ads on the account. One of them ran a number of ads that ended up getting the account disabled even though no policies were violated. I ended up getting the account re-instated, however, every single ad that I run gets auto-rejected, doesn't matter what the ad is for, what the copy is, they ALL get auto rejected. I then request a review and they all get approved. How can I get out of this process of ads being constantly auto-rejected?
Hi Andrew, glad to hear it :) That scenario really sucks - I think time will help. The more you have ads that do get approved, the more likely you are to be taken off the 'disapprove everything straight away list'. There may also be something in the copy that's consistent across your ads that's getting flagged. I'd have a really good look at that.
Ben, should I keep LAL audiences and interest targeting audiences in separate adsets and not combine (add to my stacked LAL) them? Or, should I have in same campaign using CBO? Do audience sizes need to similar so FB doesnt favor larger audience? I have a few Target interests audiences that did well in testing and not sure what to do with them. I have a stacked LAL adset with retargeting adset in cbo campaign and not sure where to place these new proven interests audiences. Any advice appreciated.
Hi Rhonda, yes I feel that it's best to keep them in separate ad sets, but the same CBO campaign. Don't worry about audience sizes being similar. I would create new ad sets in that CBO and add the interest targeting options into those. Don't run more than 5 ad sets at anyone time though.
Hey Ben I have a question regarding daily budgets in a CBO Does the start time of a campaign matter or will the algorithm spend accordingly during the times it believes are the best to get results?
Which is good placement for logistic services..Today is 1st day of my campaign and 80% of ads are placed on video feed & instant article..Is it good or should I make some changes to it?I am running reach campaign
![ไข้ขึ้นเลย! เมื่อแฝดโดนจัดเต็มวัคซีนครบ2เดือน🤒 [cc] แดนแพทตี้ SS2 | EP.54 |](http://i.ytimg.com/vi/z2VHItnyyvY/mqdefault.jpg)
Thanks for watching guys! Let me know what you think in the comments :)
Great video Ben, thanks a lot. I believe that based on what was discussed in the video, I'm gonna go and change my cold audience ads to learn more and retargeting ads to shop now as I'm selling an online course.
Awesome - hope it helps :)
Thanks for the amazing video Ben! These are very valuable tips and I'm surely gonna follow your advice about CTAs! 😃
Best of luck!
A Black Friday sale guide would be awesome!
Thanks Ben!
Can we test three different CTAs in three different ads under the same ad set to understand which CTA's works best in case of a Direct offer ? Thanks in advance
Yeah sure :) I'm a big fan of testing like that
I like this video ! Good job and very easy to use thanks!!
Glad it was helpful :)
Great Vid , the science of compliance= social psychology = indirect Commitment = CTA This was really helpful, thanks Ben
Glad it was helpful!
You are right Ben go directly to main OBJECTIVE (buy now... Etc), Do you see a difference in the reports between regular pixel and event Vs API?
Glad you think so. Yes there usually is - although hopefully it's not too great.
Ben, great video as always. What if the objective we want is purchases, but we’ll never be able to get out of learning limited because the budget won’t allow? I know you said we should teach FB to get purchases, but it seems impossible to get enough data that way. Talking about $50/$100 a day budgets. Thanks in advance.
That scenario isn't perfect but I would continue under it because you won't see better results from a different set up. Increasing the budget to get more conversions is likely to increase your cost per conversion. I wouldn't scale just to get out of learning limited.
Hi, Ben, appreciate your content.
I have a question. So I am currently running direct offer campaigns (Promotional mass products) to a cold audience and am using the 'shop now' button. I am noticing an increase in CPC and low-clicktrough rate.
Is it a good idea to test the learn more button?
I am thinking that because its a cold audience the CTA should be 'learn more'.
Doesn't hurt to test :)
I think they got rid of the option to have no buttonn which is very uncool if you have it built in to your creative video. The whole ad should be clickable I believe. Any knowledge on how not to have that on there? It really messes up the ad creative I paid good money for.
Would like to know how to change it on the new experience
Hey, now, I have faced a problem in my Facebook page, it says invalid value field for CTA type, and I can not post like before. What shall I do?
Me too, it's says origins value field is not valid for the MESSAGE_PAGE CTA type
Hi Ben, thanks for all the excellent content on your channel. I have learned SO MUCH. The organization that I work for has several people who have access to run ads on the account. One of them ran a number of ads that ended up getting the account disabled even though no policies were violated. I ended up getting the account re-instated, however, every single ad that I run gets auto-rejected, doesn't matter what the ad is for, what the copy is, they ALL get auto rejected. I then request a review and they all get approved. How can I get out of this process of ads being constantly auto-rejected?
Hi Andrew, glad to hear it :)
That scenario really sucks - I think time will help. The more you have ads that do get approved, the more likely you are to be taken off the 'disapprove everything straight away list'. There may also be something in the copy that's consistent across your ads that's getting flagged. I'd have a really good look at that.
Ben, should I keep LAL audiences and interest targeting audiences in separate adsets and not combine (add to my stacked LAL) them? Or, should I have in same campaign using CBO? Do audience sizes need to similar so FB doesnt favor larger audience? I have a few Target interests audiences that did well in testing and not sure what to do with them. I have a stacked LAL adset with retargeting adset in cbo campaign and not sure where to place these new proven interests audiences. Any advice appreciated.
Hi Rhonda, yes I feel that it's best to keep them in separate ad sets, but the same CBO campaign.
Don't worry about audience sizes being similar.
I would create new ad sets in that CBO and add the interest targeting options into those. Don't run more than 5 ad sets at anyone time though.
Hi! The Call To Action buttons are not appearing when I upload a video - is this a new change?
Thanks for the tips
You bet
Hey Ben I have a question regarding daily budgets in a CBO
Does the start time of a campaign matter or will the algorithm spend accordingly during the times it believes are the best to get results?
Not anymore - it used to make a difference, but we don't see it have an affect now.
Which is good placement for logistic services..Today is 1st day of my campaign and 80% of ads are placed on video feed & instant article..Is it good or should I make some changes to it?I am running reach campaign
You won't go wrong with the feeds :)
Gems 💎
Thanks a lot.
Ben Heath = 🐐
Thanks a lot :)
Why "no button" is bad? I use it to write longer and more attractive headlines...
A lot of prospects won't know where to click if you don't - this isn't a problem if you have a tech savvy audience.
Wall and your nose both are red.