I have a 2002 Ford F-150. Bought my truck in 2005. I enjoy watching your video. I like the Ford F-150 style of a truck. Would like to see more videos like this.
Nice video. Thanks. Helpful to see the entire progression, from trying the bolts first, then cutting, then making sure everything else was removed - lights, wires, gas neck, etc. and finally, lifting the bed off. Start to finish - nice job.
This video hit the spot for me. I just bought a used 08 F250 Lariat. I’ve got lite rust on the back of the cab. So I need to get to it so I can paint it. But I only need to slide it back a few inches so I can use a roller to smear bed coating on it. Thx.
I just wrecked on black ice. but bed was already rusted. this just motivated me. the lights are what I needed to know I'm doing this alone. so hope this helps
Got me modavated 2001 f350 single wheel I have all parts now it’s doing it 7.3 with 119 thousand cab corners and rockers ate up i have a flat bed for it’
@@melissac365 maybe weld a nut to the top, penetrating oil, and a torch to heat it up. Use the breaker bar to spin the welded nut. I think cutting the head off just exposes easier access? I have never done it but that'd be my guess.
@@bobadler3097 cut heads off of the bolts so that you can remove the bed. With bed removed, the clips holding the nuts for the bed bolts will be exposed. Cut the clip in half so that you can remove the half of the clip that is above the frame. Take a hammer and hit the bed bolts downward and they’ll fall out
If cut the heads off the bolts the bed will NOT come off. The bolt is tapered on top and bed will not get passed that. I had to weld a nut on top of bolt..
Thanks for showing the way it’s done. I’m planning on building myself an over lander with my 2003 f250 4x4. Wanting to get either a flatbed or utility box and Taylor line the entire thing. Going to watch your build.
Sorry really out and maybe you don't recall but what fender flares are on the truck? I can't seem to find any flares without exterior simulated screws/bolts
The beds are identical from 99- 2010 as you mention, but they are still mostly the same from 2011- 2016 (inner and outer box sides are cosmetically different). A 2016 box will bolt right on that truck. Same part number bed floor/ supports etc. so this video is applicable to those too… These boxes are so hard to find that I researched all the differences so that I could know if I could put a 201- 2016 box on my 09. You can put fender flares on and it would cover the only cosmetic difference ( aside from the longer fuel door). Turns out those boxes aren’t any easier to find. I have a rust free one coming from Alabama and I live in northern Canada. 😢
Good stuff man. I gotta take my 05 bed off to replace the fuel sending unit. Question, what about the goose neck? Anything special you have to do to that to take the bed off?
I have a 2002 Ford F-150. Bought my truck in 2005.
I enjoy watching your video. I like the Ford F-150 style of a truck. Would like to see more videos like this.
You're cool dude and not too long winded. To the point. I like that!
Nice video. Thanks. Helpful to see the entire progression, from trying the bolts first, then cutting, then making sure everything else was removed - lights, wires, gas neck, etc. and finally, lifting the bed off. Start to finish - nice job.
This video hit the spot for me. I just bought a used 08 F250 Lariat. I’ve got lite rust on the back of the cab. So I need to get to it so I can paint it. But I only need to slide it back a few inches so I can use a roller to smear bed coating on it. Thx.
Awesome video and right to the point. Thank you for sharing.
Killer vid, straight to the point. Thanks man
love this guy working great help...........
Use POR-15 to protect the underframe. It works great!
Great walkthrough video for us noobies just getting into our Super Duty work. Appreciate it!
I just wrecked on black ice. but bed was already rusted. this just motivated me. the lights are what I needed to know I'm doing this alone. so hope this helps
Love the Granger Smith music in the background haha 🙌🙌
Got me modavated 2001 f350 single wheel I have all parts now it’s doing it
7.3 with 119 thousand cab corners and rockers ate up i have a flat bed for it’
Sometimes it is easier to drill the center of the bolt head off leaving a free ring.
Nice video, I’m changing one on a “04”
Thank you your video was very helpful for us.god bless
So how do you take out the rest of said bolt that was seized to all get out into the frame...?
imacheat7777 Im wondering this too??
@@melissac365 maybe weld a nut to the top, penetrating oil, and a torch to heat it up. Use the breaker bar to spin the welded nut. I think cutting the head off just exposes easier access? I have never done it but that'd be my guess.
@@bobadler3097 cut heads off of the bolts so that you can remove the bed. With bed removed, the clips holding the nuts for the bed bolts will be exposed. Cut the clip in half so that you can remove the half of the clip that is above the frame. Take a hammer and hit the bed bolts downward and they’ll fall out
If cut the heads off the bolts the bed will NOT come off. The bolt is tapered on top and bed will not get passed that. I had to weld a nut on top of bolt..
Great thorough video guy, Thanks!
Thanks for showing the way it’s done. I’m planning on building myself an over lander with my 2003 f250 4x4. Wanting to get either a flatbed or utility box and Taylor line the entire thing. Going to watch your build.
You did a great job on her man!
Good stuff
Thanks for the video !
Thanks for the details on removing the bed tackling mine today.
Keep the build videos coming.
Sorry really out and maybe you don't recall but what fender flares are on the truck? I can't seem to find any flares without exterior simulated screws/bolts
I'm going to do this so I can get to my fuel pickup, rather than dropping the tank. Looks way easier
It's awesome I just bought a f350
Nice job 👍
Thanks for the info!!! Wish I had a fork truck though🤔
Great job. Thanks
The beds are identical from 99- 2010 as you mention, but they are still mostly the same from 2011- 2016 (inner and outer box sides are cosmetically different). A 2016 box will bolt right on that truck. Same part number bed floor/ supports etc. so this video is applicable to those too…
These boxes are so hard to find that I researched all the differences so that I could know if I could put a 201- 2016 box on my 09. You can put fender flares on and it would cover the only cosmetic difference ( aside from the longer fuel door). Turns out those boxes aren’t any easier to find. I have a rust free one coming from Alabama and I live in northern Canada. 😢
What is a rust free box worth?
Good video
Wow that truck bed looks mint compared to mine :(
I have a small leaf spring system under my bed and been trying to search online for it but nothing comes up! The leaf spring supports the bed.
Where can I find a 8ft replacement bed and tailgate for an F250 superduty
Will a engine hoist lift the bed off?
Do you know what fender flares are on that? I’m looking to get some that same height but don’t want them sticking out 6 miles.
Have a 2012 250 I need to do this to.
I have the same truck and I have to do the same thing
Thank you
I’m ready to take mine off that helped me I’m gonna mini grind it off
watching this after seeing it finished on Instagram
It's a little bit different huh! Haha
Yo were u from i need some help with this shit I need to do this
How long did this take you to do
Do you know the average weight of the bed? We do not have a forklift.
2 guys can lift one off.
Try a breaker bar or real impact next time lol
Safety glass,s man.
I had em on 🤘 they're just clear so hard to see them
You should have had a socket wrench I'm put a Long Bar on it for leverage you would have broke those easy
Está perro tu jale
Good stuff man. I gotta take my 05 bed off to replace the fuel sending unit. Question, what about the goose neck? Anything special you have to do to that to take the bed off?
The WHOLE reason I clicked was to see how to get the bolts out of the frame. I will be making a video to explain this
Precision Films hit em with a grinder and buy new ones, if you’re removing the bed I’ll bet they will be seized
F220
Part 1
th-cam.com/video/xdJTTdqDX8U/w-d-xo.html
You're welcome
Good information, video too jerky to watch.