How much drop did you actually get, I’ve heard buying a 5” drop you only actually get 3” of drop. Just asking if you took a before an after measurements Thks Jamie
It's taking 4" off the back bars so where your head is at is probably only 2-3". I'm 6' 1" so I wanted to make sure I can sit in the machine comfortably with a helmet on. if I where to buy it again, I would do the same thing. Thanks for watching!
Yes, it's much thicker than the stock bar. Obviously the other bars are still thinner, but atleast the bar over your head is reinforced. Thanks for watching.
I believe this is the roof that I used (won't let me post direct link). I used rubber washers from ace when I mounted it and have never even heard a squeak from it in the 5 years of owning it. Thanks for watching! Utvzilla.com
I have a 5” drop from CW on my 2019 RZR XP Turbo. I bought mine .in late March 2020 and I believe it was about $400. The actual height reduction at the rear window was about 3.75”. I easily completed the transition in less than 1 day. I did need the help of a friend to install the U shaped rear bar. It was a tight fit at the bottom and two people made installation easy. People complain about pulling the rear of the side bars down to connect to the new rear bar however if you loosen the fasteners at the bottom of the front of the cage the rear will naturally droop enough to easily connect the new rear bar. You then just relighted the lower front connectors as you complete tightening all of the rear fasteners. My RZR now easily fits into my enclosed trailer.
That looks badass!!!
Thanks, dont forget to subscribe. We'll have more content coming soon.
Nice👍
Looks great!! What is the factory cage made of? Chromoly / steel? MIG or TIG weld?
I believe it’s just Steel MiG welded
@@utvoutlaws6652 OK. I don’t have a TIG welder so I hoping I could cut & MIG weld it 🤷🏼♂️
How much drop did you actually get, I’ve heard buying a 5” drop you only actually get 3” of drop. Just asking if you took a before an after measurements Thks Jamie
It's taking 4" off the back bars so where your head is at is probably only 2-3". I'm 6' 1" so I wanted to make sure I can sit in the machine comfortably with a helmet on. if I where to buy it again, I would do the same thing. Thanks for watching!
Is it any stronger though? Thats the problem w the stock cages if you roll them the cage will fold
Yes, it's much thicker than the stock bar. Obviously the other bars are still thinner, but atleast the bar over your head is reinforced. Thanks for watching.
Curious as to what roof you have? Maybe a link to it?
I believe this is the roof that I used (won't let me post direct link). I used rubber washers from ace when I mounted it and have never even heard a squeak from it in the 5 years of owning it. Thanks for watching!
Utvzilla.com
I like it where can i get one for my xp 1000 👌
Check with cw motorsports to see if they have anything available for your machine! Thanks for watching!!
How much money?
I dont remember the exact amount, but I bought it on a black Friday and saved a few bucks.
I have a 5” drop from CW on my 2019 RZR XP Turbo. I bought mine .in late March 2020 and I believe it was about $400. The actual height reduction at the rear window was about 3.75”. I easily completed the transition in less than 1 day. I did need the help of a friend to install the U shaped rear bar. It was a tight fit at the bottom and two people made installation easy. People complain about pulling the rear of the side bars down to connect to the new rear bar however if you loosen the fasteners at the bottom of the front of the cage the rear will naturally droop enough to easily connect the new rear bar. You then just relighted the lower front connectors as you complete tightening all of the rear fasteners. My RZR now easily fits into my enclosed trailer.
@@johnsalmon1564 how tall are you? I’m 6’1” and I have a clean air system with the connection on top of the helmet. I’m looking to buy the 5” drop