Vocês fazem os coturnos de boa qualidade que pena que aqui não tem no Brasil os seus colaboradores aí fazem coturno artesanal mesmo que vocês tenham maquinário o calçado é de excelente qualidade eu sou Luiz Alberto Rodrigues dou sempre um joinha para vocês eu sou gaúcho eu moro em Gravataí estado Rio grande do Sul município de Gravataí mesmo Deus abençoe vocês e aos seus colaboradores eu creio que vocês fazem esses calçados o que deve ter uma excelente história aonde vocês começaram que essa fábrica não surgiu assim numa casa essa fábrica surgiu através de uma história do fundador dessa fábrica Deus abençoe vocês tá❤😊💯💯💯🎁🙏
I just received my OC Bison boots and am in the process of oiling and breaking in. The quality is above and beyond. The fit was spot on 10.5 = 9.5 x 3E
I watch videos of guys surfing. It's just them surfing, maybe some footage of the shore and footage of the boards out of the water. I refer to it as surf porn. This is boot porn. Much love from Spokane.
I just received my OC Bison boots and am in the process of oiling and breaking in. The quality is above and beyond. The fit was spot on 10.5 = 9.5 x 3E
I trying to decide between these and the forefronts. Hope to make up my mind by the time I wear in my new mahogany 300s.. (super excited for them to get here)
If anyone from Nicks is reading comments, there’s a need for an American made full grain leather unlined 6 or 8 inch height backpacking boot. The sole needs to be stiffer than most general purpose hiking boots. And if you decide to create a winter version of it use closed cell foam between outer and inner full grain leather as the insulator. See the Lundhag Professional II High Opti as an example. The closed cell foam won’t absorb moisture.
It is actually hot water that we soak the boots in. What this does is allows the leather to stretch around the last in the wet lasting stage. This helps the boots hold there shape after breaking them in👍
@@jkbootsusa I'm a Brannock size 11EE, and just ordered a pair of Drew's Loggers in 10EE... the made in Mexico version. If they fit well, I will be ordering a pair of the OT or Forefronts in Bison. Most likely in the same 10EE as the Drew's.
@@Condor1970if u know your brannock i’d just go a size down n then measure the ball of your foot n go with their guide. I did it and it fits exactly like it’s suppose to (with some extra space infront to compensate when the insole/boot breaks in. Just from what I’ve read i’d never assume/trust that the size would be the same across different manufacturers. Hope this catches you before you order
I’m curious with the outsole stitching: do the stitches come in contact with the ground? If so wouldnt that be the sole’s weakest point? I’m thinking of purchasing this model but this aspect intrigues me.
Olá. Trabalho excelente! Do jeito que vocês consertam e reformam essas botas, o resultado fica uma verdadeira obra de arte! Como eu devo fazer para comprar os produtos de vocês? Um forte abraço!
He did add a shank, i believe it was leather. It was dark in color. Seemed like it was more maliable and thinner than one from other companies. Looked like he was able to form it to the boot and glue it instead of a more rigid one that needs to be nailed down.
@@ktraughb you may be completely correct. I assumed it was leather, but confused why they would use a piece that is dyed and also very malleable. Poron filler makes more sense.
Before I die I will hike in these boots. New life goal
😂 Thats awesome!
I wanna work here just to experience the leather SMELL.
I wanna work here just to smell the glue
Vocês fazem os coturnos de boa qualidade que pena que aqui não tem no Brasil os seus colaboradores aí fazem coturno artesanal mesmo que vocês tenham maquinário o calçado é de excelente qualidade eu sou Luiz Alberto Rodrigues dou sempre um joinha para vocês eu sou gaúcho eu moro em Gravataí estado Rio grande do Sul município de Gravataí mesmo Deus abençoe vocês e aos seus colaboradores eu creio que vocês fazem esses calçados o que deve ter uma excelente história aonde vocês começaram que essa fábrica não surgiu assim numa casa essa fábrica surgiu através de uma história do fundador dessa fábrica Deus abençoe vocês tá❤😊💯💯💯🎁🙏
I just received my OC Bison boots and am in the process of oiling and breaking in. The quality is above and beyond. The fit was spot on 10.5 = 9.5 x 3E
Great to hear you're enjoying the boots Steven 👍
lol, I literally just ordered this boot in this color. Then I found this video. It was like watching someone make my boots. This is awesome.
Probably was your boots
You can tell he's made a few pairs of shoes before. =)
What a beautiful work well done. I'd love to be able to do this kind of work!! You are a master of your craft.😊
I love the design of these, def the first pair I'd buy from y'all
How do these stack up in terms of durability compared to something like a builder pro?
Why no gusset?
I watch videos of guys surfing. It's just them surfing, maybe some footage of the shore and footage of the boards out of the water. I refer to it as surf porn. This is boot porn. Much love from Spokane.
This was presented so masterfully my friend, love it!
This is my daily boot! Wonderful work gentlemen!
how the arch support
@@mendezj1287 it's excellent! I'm used to more flat shoes so it's a noticeable difference in height, but super comfortable and supportive.
@@MBG17686 thanks I appreciate you thanks for information.
@@mendezj1287 You're welcome!
Did yours come with a tongue with no gusset like this or was it fully gusseted like the rest of their boots?
I’m shooting to order mine in two weeks.
Awesome we'll be ready!
I just received my OC Bison boots and am in the process of oiling and breaking in. The quality is above and beyond. The fit was spot on 10.5 = 9.5 x 3E
I trying to decide between these and the forefronts. Hope to make up my mind by the time I wear in my new mahogany 300s.. (super excited for them to get here)
I wonder if the boots fit for hot weather like tropical? where it's constantly in between scorching hot and raining.
If anyone from Nicks is reading comments, there’s a need for an American made full grain leather unlined 6 or 8 inch height backpacking boot. The sole needs to be stiffer than most general purpose hiking boots. And if you decide to create a winter version of it use closed cell foam between outer and inner full grain leather as the insulator. See the Lundhag Professional II High Opti as an example. The closed cell foam won’t absorb moisture.
You are aware the JK is a direct competitor with Nicks, aren't you?
For a man true satisfaction in life is working with your hand and producing something people will admire.
These boots look cool!!
👋👋👋👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌
Maybe the construction site office
Most excellent boots! Can you send them to Australia?
They ship internationally
Very helpful video! What is the name of the tool you use to scratch the skin (17:11) before applying the glue? Where to buy one?
It is called a leather rougher.
@@benDaku13 Thank you very much!
27:49 Un par de zapatos a todo terreno
Zapato inédito.
My most comfortable pair yet
Quedaron de lujo esas botas ❤
Very well made product, I was a bit surprised to see the tongue isn’t gusseted all the way up.
That's a nice boot!
What does putting the leather in oil do?
It is actually hot water that we soak the boots in. What this does is allows the leather to stretch around the last in the wet lasting stage. This helps the boots hold there shape after breaking them in👍
Do these have lots of arch support, like found in a 55 last Logger boot?
You can expect the same amount of arch support with our boot lasts.
@@jkbootsusa I'm a Brannock size 11EE, and just ordered a pair of Drew's Loggers in 10EE... the made in Mexico version. If they fit well, I will be ordering a pair of the OT or Forefronts in Bison. Most likely in the same 10EE as the Drew's.
@@Condor1970if u know your brannock i’d just go a size down n then measure the ball of your foot n go with their guide. I did it and it fits exactly like it’s suppose to (with some extra space infront to compensate when the insole/boot breaks in. Just from what I’ve read i’d never assume/trust that the size would be the same across different manufacturers. Hope this catches you before you order
I’m curious with the outsole stitching: do the stitches come in contact with the ground? If so wouldnt that be the sole’s weakest point? I’m thinking of purchasing this model but this aspect intrigues me.
Pure Artwork
Olá. Trabalho excelente! Do jeito que vocês consertam e reformam essas botas, o resultado fica uma verdadeira obra de arte! Como eu devo fazer para comprar os produtos de vocês? Um forte abraço!
Love it
Nice.... Very very nice..... Good job......
How much the Price and Shipment to India
These videos plus Rose Anvil have help me decide what to get. Was thinking 300x but I've landed on black 6" OTs. Ordering the next day or so
did the exact same thing haha, ordered mine little over a week ago, same color and everything.
Amazing 👍👍👍👍👍🌟🌟🌟🌟🌟
Appreciate it 👍 🔥
27:37 27:49
😍😍😍😍😍😍😍😍
I just orded this pair of boots!
Donde consigo unas burras de esas? Saludos
A este gran trabajo se le llama calidad.,!
What's the price, sir?
What is the stuff that was brushed onto the outsole, towards the end, that gave them the beautiful honey color?
Ink
Nice boot nice work
Great job
Perfeita uma verdadeira obra de arte 👏
Ganda
No shank? Not even leather?
He did add a shank, i believe it was leather. It was dark in color. Seemed like it was more maliable and thinner than one from other companies. Looked like he was able to form it to the boot and glue it instead of a more rigid one that needs to be nailed down.
@@benDaku13 that appears to be just a poron filler for that void.
@@ktraughb you may be completely correct. I assumed it was leather, but confused why they would use a piece that is dyed and also very malleable. Poron filler makes more sense.
What's the black material at 17:40 that the midsole is attached to?
Looks like a leather shank, common material used in PNW boots. It'll last much longer than steel
Lindas botas
How much are these.?
I have those boots and would not wear them to my office... If I worked at a dump, I would..
Perhaps you should find a job where they'd let you wear them into your office.