Hi Ricky, Awesome video as always got mine today but before I install, I want to change the bulbs to LEDs ,plz tell me what type of LEDs must I use? H1,H4 or H7 for the spots?
Fiz a substituição dos meus farois originais estavam com o vidro partido ,coloquei da VALEO para encaixar correctamente...😇 mas não gosto da cor das lâmpadas🙄 Que tipo de leds ( marca) devo colocar lá??LÂMPADA HB4...
I got mine installed today... When driving home I thought to myself.... How do you change a bolb if it goes out? And is it only me or do they shine more to the sides?
In the case of our install the bumper would probably need to come off, terminals on the wires would also help marking the changing process easier. As for the angle yes we found these pirate spots don’t really shine forward but then again that’s the headlights job ✌️
yo buddy i done the same set up tapped my fog lights into the parks then i left it on foe about 10-15 min and it got VERY VERY hot so hot that the one globe popped.....any advise?
Hi there, if the wiring is fine then it might be a case of the bulbs being faulty. They should get warm as most bulbs will but to the point where it pops is unheard of on our side. Bear in mind we are not experts so we would suggest to chat to an auto electrician.
Evening I bought fog lights for the same car,got them working with the park lights. Then 2 days after they stopped working(including the park lights rear and front) checked the fuse for the park lights all good. Do you have any idea of what could be the problem
This Polo looks so good with the spots 👌🏼😁 man like Ricky 🙌🏼 💯
Good to see the fogs being put to good use! 😅 Nice work! 💪🏾
The 9N3 bumpers are a bit of a struggle to get off🤣🤣🤣. Magnetic tip screwdrivers are a must
Hi Ricky, Awesome video as always got mine today but before I install, I want to change the bulbs to LEDs ,plz tell me what type of LEDs must I use? H1,H4 or H7 for the spots?
According to a polo group it’s recommended to use H11
looking to do the same on my golf. and i dont want to use the relay. can i tap directly from the parking lights
It should work but we are not sure if it will cause any issues worth a shot
Fiz a substituição dos meus farois originais estavam com o vidro partido ,coloquei da VALEO para encaixar correctamente...😇 mas não gosto da cor das lâmpadas🙄 Que tipo de leds ( marca) devo colocar lá??LÂMPADA HB4...
Good day. Where in CT are you.
great 1 can you make a video to fit cupra lip and mud flaps on a polo 9n
When we get a chance we will try to do one
we're can I get hold of you to do some mods on my polo 9n
Hey I tried changing my headlight on the same polo but having problems clipping the bulbs back into place and the space is a nightmare 😂
Can you do a video of how to install front lip on a 9n3
If we get a 9n3 to install one on the we will document it 🙏
I got mine installed today... When driving home I thought to myself.... How do you change a bolb if it goes out? And is it only me or do they shine more to the sides?
In the case of our install the bumper would probably need to come off, terminals on the wires would also help marking the changing process easier. As for the angle yes we found these pirate spots don’t really shine forward but then again that’s the headlights job ✌️
yo buddy i done the same set up tapped my fog lights into the parks then i left it on foe about 10-15 min and it got VERY VERY hot so hot that the one globe popped.....any advise?
Hi there, if the wiring is fine then it might be a case of the bulbs being faulty. They should get warm as most bulbs will but to the point where it pops is unheard of on our side. Bear in mind we are not experts so we would suggest to chat to an auto electrician.
Where in CT are you based?
I have a Polo vivo Sedan 2011 model , what will cost me to upgrade my headlights to LED's and install some fogs as well ?
Pricing will vary contact max motorsport they might be able to assist with cost
Hey, where did you buy those fog lights?
The owner purchased them not us
Where Can I Get That Front Bumper? 😍
It’s a OEM VW polo vivo bumper
When I scrab the wire which colour do I scrab
Either the red and black or the 2 black ones depends on the model car
Do you dont connect them on the parks?
you connect them to the parks
Where do i buy this spots with covers?
MaxMotorsport sells them
So this was an old spec bumper and you didn’t need to buy a new bumper you just cut out a part to fit the foglights?
bingo
Evening
I bought fog lights for the same car,got them working with the park lights. Then 2 days after they stopped working(including the park lights rear and front) checked the fuse for the park lights all good. Do you have any idea of what could be the problem
Not sure what could have caused the problem, especially seeing as the fuse did not pop
have you found the solution?
I am having a problem with mine they are blowing the left side fuse…I checked wiring but no win have you guys come across something?
What bulb is in this foglamp?
H7
I've connected mine just like this but the wires keep burning, how do I avoid this from happening again?
We would suggest try running a thicker wire and see if that helps
Is this a job that you can do for me at a fee? And if so, what do you charge to do this conversion?
We don’t do installs unfortunately
First🔥👍🇩🇪
Quick fast
This polo looks same tata indica in front view..
Can see that a little 🤏
@@GERMANESE yes in front view
It's cool but we don't learn anything because we can't even see the connection of them
The next set we do we will show the connection and wiring in depth 🙏