YOLOPARK OPTIMUS PRIME REVIEW!!!
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2022
- Welcome to my review on the Yolopark Bumblebee Movie Earth Mode Optimus Prime! In this review we will take an in depth look at everything this amazing kit has to offer!
THIS VIDEO IS POWERED BY USAGUNDAM!
To get your hands on one of these Prime's follow the link below:
www.usagundamstore.com/produc...
Special thanks to Yolopark for creating this absolute masterpiece!
Special thanks to 5StackGaming for the support! Go check them out for everything gaming on Instagram and Twitter!
5SG promo codes:
reppsports.com/product/raze-e...
Use code: JOEMONTAGNEYA - แนวปฏิบัติและการใช้ชีวิต
Bandai got some serious competitor here, wish they can put as much details into rg kits too.
The details that come out when the joints move are crazy 😮
Indeed! The engineering in this kit is mind blowing!
By gluing the shoulder part to the arm --- since it kept coming off whenever I attempted to remove the whole arm from the body --- the arm, when extended, does not drop when holding the gun. I will post a video showing this soon.
This kit is more detailed that an MGEX Gundam or even a Perfect Grade level Gundam, ITS CRAZY!
Agreed!!!!
Yeah! That’s what we get on a kit based on a live action cgi model
@amatsu7619 that's not live action Optimus though
Its bumblebee movie prime....so yes it is lol
@@ZainMalik-mj1qsIt is though.
I've ordered this and it will be delivered very soon! I'm soooo excited to built this. This is awesome! I think it will took a month to finished this since I will be doing this in my workplace during break 😅 thanks for this review it made me more excited!
I am so excited for you! It is definitely an amazing kit!
This kit is making me drool. It’s like I’m not even worthy to handle it 😂 but seriously, this is centerpiece material to my sea of gunpla. Very nice review!
man, nice detailed review, your channel deserves more subs! salute!
Thank you!!!!
Dang this thing gives Bandai PGs a run for it's money! Great review dude! Can't wait to see you paint him. 😆
Thanks bro! 🥰
Looks incredible. Wish I had the patience to build. 💀
Awesome review can't wait to see it painted 😉
I am tempted to paint it next after the Xi is done lol
Hello. I know this is an older video but I found it because I personally bought this kit last week and the right bicep was getting stuck. I hadn’t built the left arm yet. I did yesterday and I figured the connector out. I had to push the bicep piece on off of the kit. It settles with a BIG click and you do have to slightly manipulate the piece to get back in but it’s so nice to have working. Dismantling the arm to get back to the bicep is also not to difficult. Hope this helps
Thank you for the comment! I wanted to add the bicep deal in the review to let people know everything they may come across with this kit. I found on mine It doesn't stick if you bend the arm in a specific way lol. I plan to paint mine so it won't be doing much movement afterwards lol.
Subscribed! Keep up the good work and awesome videos dude -GrandfatherGoose
Hey! Thanks bro! I may not be the fastest to upload sometimes but I try to make the best videos I can.
I cant wait for mine to be arrive. Just watching all kinds of video on yolopark's transformers model kit❤just to kill time lol
Awesome fellow collector....Twitter 🐦 sent me here.
Great job man! Awesome and very thorough review of this kit! Much appreciated! Among other details you pointed out, I didn't know about those vented parts on the shin moving when the knees are bent or the tab tthat swings out of the rifle when the gun handle is pulled back. As of this post, I'm nearly done building mine. I just have to do the left leg and rebuild the head piece because I added pico-sized blue LEDs to the eyes.
Adding the leds to the eyes is definitely something I would like to do as well! Eventually I will tear mine apart and paint it! Thank you for the kind words and I am happy the review was able to help!
what led you went for?
I will most likely use Evans Designs Pico leds.
@@GunplaJoey the installed pico-sized blue LEDs look awesome in mine. I posted some vids. Takes this model onto the next level.
@@1515cci thanks, both of you 🙂 planning to get this next week because it looks awesome
great vid!
Thank you!!!!
great review!!! i wish theyd do a bumblebee soon,
also do you plan on taking it apart and painting it?
Indeed I do!
I'm gonna fully paint and weather mine. It's gonna look insane.
I'm thinking of doing the same!
@@GunplaJoey The blue looks nice as is, but the red could definitely use a lick of paint. I find that Metallic Orange followed by a coat of Clear Red gives a gorgeous 'candy' finish. And some metallic grays for the mechanical details will look awesome.
I'm pleased that this kit lives up to expectations.. my preorder just came in on ShowZ.
Does it have decals, or are the paint aps pre-applied?
The autobot symbols on the shoulders are on the parts on the runner but the kit does come with a small set of decals for the wrists and more autobot symbols in case you paint it.
@@drewlovelyhell4892 would metallic red look good?
Is using using testors goo too btw?
Just subscribed. The shoulder sag is pretty disappointing but I'm getting this kit regardless. It's utterly amazing.
The shoulders could also be easily fixed with a strip of joint guard! Good thing about plamo kits is they can be modified 😉
Hey, try adding some water based polyurethane to the shoulder joints to make them way more sturdy.
The joints are metal so etch primer would probably go down first but that's a great idea.
i wish i could afford one, it is really impressive
It is a little pricey but it is definitely worth it. If you do get the chance go for it!
Ordered today... looking forward
Enjoy the experience that is this kit! I want to know how it goes for you!
@@GunplaJoey I'm used to Bandai kits . This should be similar.... I think I'm going to dry brush the exposed engine parts
I hope threezero goes this hard on details
Bro this thing looks so sick. It’s the Optimus Prime we all needed!
Agreed!!!!!
Hi..i do noticed that we have got a spring parts, and im currently still in progress build this kit, may i know where this spring part belong to?
It is installed in the back of the upper leg and allows the panel to push inwards to allow for the deep knee bend.
How would you say the plastic quality is? Does anything feel fragile?
The plastic quality is top notch! Feels just like premium plastic like bandai!
Ya ever figure out what those empty peg holes in the upper body are for? Lore stuff or for a future expansion?
Unfortunately I have not 😅 honestly i was kinda hoping someone would know lol. The only thing I can think is some sort of missile pods or maybe an attachment point for something later on?
@@GunplaJoey oh hey, I may have cracked it! They're making a Shockwave kit now, and apparently it reuses a lot of this kits' inner frame. It happens to have a pair of wings jutting out from about the same place as those peg holes!
Yes I think you may have figured it out! I had noticed the similarities but didn't think about that! Great work!
That's it! I'm buying this.....I'll go in debt idc
Did anyone find a way to fix the shoulders? Did someone make ratchets that fit? Thanks
You could possibly use joint guard to thicken up the connection and add more friction
@@GunplaJoey There is that, I just thought with all the complaints, someone might 3D print a ratchet for it. Thanks
So I put the model all together and I’m having an issue getting both of the knees to do the full bend from the back of the upper leg into the upper calf. Not sure if I’m describing it right. The knees bend they just don’t bend into the bottom part of the legs. Im afraid to push to hard and brake something. Any tips on what might be the issue?
I'm sorry to hear this. Off the top of my head, my first thought would be to check and make sure you installed the spring properly in that section to allow the upper calf to sink down to allow for that full bend. This will require disassembly, so take your time and carefully refer to the manual.
@@GunplaJoey I figured it out. Thanks for the input. I appreciate it.
Glad to hear that!
any problem in snap fittings? loose?tight?
Nothing really jumps out to me. It's a super solid, well-made kit! Tolerances are top-notch!
hows the build % someone told me its like a pg gundam
Honestly it puts PG's to shame in my opinion lol.
Wow what an incredible kit ! How much was it ?
It runs around $200 usd
Did you get the PLAMO version or the IIES 24" version?
I got the plamo kit, but it is still 24" lol
@@GunplaJoey i just stumbled upon this kit, what the difference between iies v plamo versions?
The plamo version is a model kit you build yourself
@@GunplaJoey ah okay! so then I'm assuming iies is something prebulit 🤔 sorry for the noob question lol
I believe the other is a statue and it's very expensive lol
They need to make more characters for real, I hope these kits are selling well enough for that.
I agree!
Have you seen the Transformer Shockwave they did as well?
I have and I would love to build that one as well!
@@GunplaJoey damn guy you have some impressive works. Do you provide painting services? I have an Optimus Prime Earth Mode kit not assembled yet cause I want the pieces metallic but I can’t paint. I want cut the parts off the spruces myself, clean them up & send them to some one to paint them & send them back to me so I can then assemble it myself.
@@GunplaJoey here’s 2 references with look I’m going for without the weathering & worn look of course.
I almost cried when i almost finished it..its worth the tiring clipping
Nice figure. Super detil
And i making optimus cosplay costume in my video .
That's awsome! Sometime in the near future I will disassemble and paint this kit! That will be quite the project lol
It's cool but so far the build is pretty disappointing. A lot of parts that need to be modified to even fit on properly. Could just be a degradation in the molds even though it's a pretty recent kit. It looks really nice but it ain't got nothing on the PG unleased
Get some Kiki for the loose joints.
For sure I'll address them but for the review I wanted to show out of box results.
This looks like it completely blows out perfect grades. At ONLY $200 this dudes a steal. Looks great oob so I don't think I'll be painting. It would take me a year at my pace. 2 hours of gunpla a week.
Just saw the vents open on the shin and I made a noise lol. Felt like I just took a bite of the best steak I've ever had. Bandai needs to step their game up.
I know this is an old comment, but currently building this thing, it's got a million parts but it's got nothing on actual PGs. It's detail but it's also obtuse and got a lot of poor fits that need to be worked on for parts to snap on
Ofcourse the polycaps will get loose if you move that shoulders too many times.
If you are referring to the section I talk about the weapon holding the reason it has issues isn't because it's "loose". It is a polycarbonate over a metal peg which has not much friction to hold it up well. I haven't moved it much at all. An easy fix for this would be to get some joint guard strips to give it a little texture to hold on to.
yolopark hit it out of the park
Agreed!!!!
Bro you just groped Optimus.
For science! 🤣
Engineerity is not a word you can find in dictionary lol.
😂