97-05 BUICK CENTURY REGAL MASTER POWER WINDOW SWITCH REMOVAL REPLACE - DOOR PANEL

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ก.ค. 2013
  • Just documenting how i removed the door panel and took out the power window switch. @ 5:25 i found out you dont need to pop the entire door panel.
    The window lock switch was broken, and i attempted to fix it. The solution works, but i end up buying a new switch on eBay for $22 and installed it all over again.
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 31

  • @Tom-wq2mz
    @Tom-wq2mz 4 ปีที่แล้ว +2

    That's how you learn my friend. I'm 47 and I've learned a lot in 34 years. Keep in mind just about all G.M. and Cadillac vehicles made during the 90 and late 90s use this style of pop in and out switch. Just be very careful when pushing the tab in then push the whole switch forward then pull up gently. Good luck in the future

  • @TomWarrenPhotography
    @TomWarrenPhotography 11 ปีที่แล้ว +2

    you did a great job with the camera angles and explaining what you were doing. You must be really smart to figure that all out without a manual. Thanks for the walkthrough.

  • @michael7171
    @michael7171 ปีที่แล้ว +1

    Finding out that you didn't have to remove the door panel after removing the door panel to remove the window switches, priceless 🤣🤣. I feel your pain.

  • @dhopetheartist
    @dhopetheartist ปีที่แล้ว +1

    I like how you showed removing the door panel. Need to replace the window regulator on mine.
    Thanks.

  • @digablesoul
    @digablesoul 8 ปีที่แล้ว +4

    I'm so glad you did the whole door panel removal. Whether there was the easy or the hard way, this will help with my speaker replacement so much. I got stuck at the plastic surrounding the handle/tweeter. Thanks for putting up the video!

  • @moterdude1959
    @moterdude1959 9 ปีที่แล้ว

    I am glad I came across your video I needed to see how to remove the door panel to get at the top little speaker on my wife's 2000 Buick Century. I could not find much info than found your video. Thanks for posting your video.

  • @subwayguy1610
    @subwayguy1610 8 ปีที่แล้ว +2

    I got like 2 minutes into the video and was about to comment that you didn't need to take the door panel off ;). But it was a good thing you eventually found out as it saves a ton of time incase you need to remove it again.

  • @chrismarinelli8318
    @chrismarinelli8318 ปีที่แล้ว

    Didn't try it yet, I hope it works. You would be the man!

  • @HTownPyro
    @HTownPyro 7 ปีที่แล้ว +9

    You didn't have to take off the whole door panel but I see you figured it out

    • @Tom-wq2mz
      @Tom-wq2mz 4 ปีที่แล้ว +1

      😂🤣😂 That's how you learn. Maybe next time he'll take off the gas tank to fix his injectors 😁

  • @kimash654
    @kimash654 ปีที่แล้ว

    your a boss dude thanks hot as hell in wiscaaansin and gas prices are killer with that ac bra! thanks again

  • @gregj2448
    @gregj2448 9 ปีที่แล้ว

    Thanks, I need to replace the speakers and couldn't figure out how to get the panel off

  • @Braidsandbeauty
    @Braidsandbeauty 3 ปีที่แล้ว

    What was the tool to use to take off the door panel ?

  • @andrewx7806
    @andrewx7806 10 ปีที่แล้ว

    Would it be easier to run a wire across the bundles?

  • @babycody57
    @babycody57 6 ปีที่แล้ว

    Do you know how to jumpstart a window

  • @bbaaspencer1
    @bbaaspencer1 9 ปีที่แล้ว +1

    I used a butter knife and lifted it out, then unhooked the connectors. No door panel removal or anything.

  • @GalaXy808
    @GalaXy808 11 ปีที่แล้ว

    good video

  • @DIYTinker
    @DIYTinker  11 ปีที่แล้ว

    thanks! :)

  • @sandralutz4341
    @sandralutz4341 11 ปีที่แล้ว

    I replaced the switch without removing the door panel. 10 minutes and done.just pop out the window switch.

  • @ardeesmith3233
    @ardeesmith3233 8 ปีที่แล้ว +1

    This is a 5-minute job to pop-out the old switch unit and pop-in in the replacement unit. Just remove the window control assembly from the arm rest with a screwdriver as a lever. I really hope no actually does the useless disassembly described in 99% of this video. On the other hand, if you need to replace the in-door speaker, then go ahead and watch how to remove the entire door panel.

  • @sandragreiner287
    @sandragreiner287 ปีที่แล้ว

    Back door lights by clothes rack

  • @pierreclausell6468
    @pierreclausell6468 10 หลายเดือนก่อน

    I didn’t need to take off door

  • @conurelover1684
    @conurelover1684 9 ปีที่แล้ว +2

    Cant' you just pop out the power window control console from above without having to remove the door panel?

    • @DIYTinker
      @DIYTinker  9 ปีที่แล้ว +2

      5:25 i say the same thing you are saying.

    • @Amigo4evr
      @Amigo4evr 8 ปีที่แล้ว +3

      this guy is stu@$d ... you are right! just pull the main control switch out, then disconnect... if this is all you need to replace... duuuhmmm... LOL

  • @GalaXy808
    @GalaXy808 11 ปีที่แล้ว +1

    wow

  • @marcolavoie5723
    @marcolavoie5723 10 ปีที่แล้ว +2

    i just did the same job without removing the panel 30 sec see at 5:28 . and i just glue the fucking nob on position unlock that's it, easy ,quick and clean, i dont have children so! 10m job. eventually i will change the whole thing maybe i'll wait until something else brake

  • @medidkorn
    @medidkorn 4 ปีที่แล้ว

    Lmao you didnt have to take the whole panel off lmao the switches pop right out lmao

  • @DIYTinker
    @DIYTinker  11 ปีที่แล้ว

    thats good to know. i can see what you mean @ 5:26

  • @seudechrist
    @seudechrist 10 ปีที่แล้ว +2

    i bet you he fealt pretty silly after taking that door panel off.. always pays to read a lil.. w-body.com.. regalgs.org.. i dk.. many to choose from

  • @ysabelperez8650
    @ysabelperez8650 ปีที่แล้ว

    No