Got my new go pro since I lost mine at Clean Culture. Unfortunately I didn’t notice and recorded this whole video in 4:3 instead of 16:9. So it might look weird on some devices. Forgive me I’m new lol. From what I can tell it’s best viewed on your phone ! Subscribe for more Jetta content and less noob stuff
Wow . You did it the hard way but best way. I crawled under the front bumper , lined it up., marked it , drilled and screwd it in with non - corossive screws ..and it came out perfectly. But that was with a bit of luck .
Looks sick dude! Ive had this exact lip sitting in my amazon cart for a couple months now and wasnt sure if I was gonna buy it or not bc i couldn't find any reviews or how it looked but im for sure getting it now. Also I peeped the Trans Am in the garage 👀🔥🔥🔥🔥🔥🔥
Thank you, also it’s the ...👀 6.6L V8, if you know Smokey and the bandit. It’s like the same one. Glad my video was helpful. I have other mods on my channel if you want to check it out. I’m getting another diffuser and new side skirts next
I have the same lip for my Jetta. I glued my 3-pieces together with a good clear dry adhesive and did not use the standard screws it came with. Used nuts and bolts so I know 100% that the lip isn’t going to fly off my bumper. But I didn’t have to take off my whole bumper, I just jacked it up all the way, and used Jack stands. 🤙
Thank you for that. I will probably do that next time. I know for sure, this wont be the last time I install this lip.... I'm sure I'll destroy it driving and get another one. I'll probably glue it all together then install it
How did you add the nuts on the inside of the bumper without taking it off? Did you have to remove the splash shield or just get your arm in above it? I’m thinking of using nuts and bolts when I install mine I just didn’t know if you could get behind or not without taking the bumper off
@@drewwilliams4730 Hey what you saw in the video is exactly what I did . I did not use bolts and I did not reach behind the "splash shield". That thing is extremely difficult to reach behind to begin with. Bolts are a good idea. Whenever I break this lip I might use bolts but the screws work just as good if you do it right. If you do not want to take the bumper off, jack up the car and use screws to screw the lip on. Even easier than what I did. Removing the bumper is easy for me because I have done it many times in many different videos . ( fog light install, fog light leds, front grill, head lights, etc)
@@DrivenByChris oh aight, no problem bro, appreciate the reply🙏🏽. I've been trying to find a lip similar one for my 2013 jetta s but just can't find it.
this is a facelift (mk6.5) bumper that came with my car. As u can see in this video I added the front lip. I'm sure u can order this. check ur local vw dealer or ecstuning.com
Hey man i have been looking for a carbon fiber front lip for my car forever and just cant seem to find one. anyway you could post the link? I drive a 2017 mk6.5 jetta but its a GLI idk if that will have compatibility issues
Looks awesome man! Gonna have to get a front lip for mine! Do you have a rear diffuser on yours or no? If you do I would love to see a vid on installing it
Thank you! In regard to the lip. I do actually Here’s the link : th-cam.com/video/0TlP91ybcws/w-d-xo.html I might be getting a new one soon. Depends on ecstuning . They’re supposed to be making carbon ones.
@@juanhidalgo6234 I’ll find the link . I have to order another lip. I broke this one tonight . I do, my insta is the same as my YT. It’s also linked on my channel home page and in some videos
@@DrivenByChris not that your Jetta looks bad but u can tell it’s from Amazon man. I’m currently doing a Jetta myself so this video popped up under my recommendation
@@thewholecountryislaughinga8440 interesting, most don’t think it is. It’s actually from eBay . Most like it on my channel. Also I didn’t want to spend a lot to get a better looking lip just for it to break for being too low.
@@DrivenByChris just my two cents didn’t say it looks bad just can tell when parts come from those places. If u dd it I understand then I personally don’t dd any of my modded cars
Got my new go pro since I lost mine at Clean Culture. Unfortunately I didn’t notice and recorded this whole video in 4:3 instead of 16:9. So it might look weird on some devices. Forgive me I’m new lol.
From what I can tell it’s best viewed on your phone ! Subscribe for more Jetta content and less noob stuff
Youve inspired me to show my 6.5 to the youtube world! I've been working on it for 2 year and its time I get serious!
Sweeeet, have fun
Wow . You did it the hard way but best way. I crawled under the front bumper , lined it up., marked it , drilled and screwd it in with non - corossive screws ..and it came out perfectly. But that was with a bit of luck .
Lucky. Yeah I would have done it that way... the only issue I had with that was... the car was way to low
Looks sick dude! Ive had this exact lip sitting in my amazon cart for a couple months now and wasnt sure if I was gonna buy it or not bc i couldn't find any reviews or how it looked but im for sure getting it now. Also I peeped the Trans Am in the garage 👀🔥🔥🔥🔥🔥🔥
Thank you, also it’s the ...👀 6.6L V8, if you know Smokey and the bandit. It’s like the same one. Glad my video was helpful. I have other mods on my channel if you want to check it out. I’m getting another diffuser and new side skirts next
What brand is it? I’ve been looking into getting one but can’t find any other than oem ones.
Looks good bro! Also I really like your driveway. Lol 👍🏻
LOL thank you. Side skirts are next!
I have the same lip for my Jetta. I glued my 3-pieces together with a good clear dry adhesive and did not use the standard screws it came with. Used nuts and bolts so I know 100% that the lip isn’t going to fly off my bumper. But I didn’t have to take off my whole bumper, I just jacked it up all the way, and used Jack stands. 🤙
Thank you for that. I will probably do that next time. I know for sure, this wont be the last time I install this lip.... I'm sure I'll destroy it driving and get another one. I'll probably glue it all together then install it
How did you add the nuts on the inside of the bumper without taking it off? Did you have to remove the splash shield or just get your arm in above it? I’m thinking of using nuts and bolts when I install mine I just didn’t know if you could get behind or not without taking the bumper off
@@drewwilliams4730 Hey what you saw in the video is exactly what I did . I did not use bolts and I did not reach behind the "splash shield". That thing is extremely difficult to reach behind to begin with. Bolts are a good idea. Whenever I break this lip I might use bolts but the screws work just as good if you do it right. If you do not want to take the bumper off, jack up the car and use screws to screw the lip on. Even easier than what I did. Removing the bumper is easy for me because I have done it many times in many different videos . ( fog light install, fog light leds, front grill, head lights, etc)
Nice bro! Looks like it should have came that way from the factory.....I love mine!
I agree, even just a little one. The GLI has a nice stock looking dual lip thing. Its subtle and nice
Where did you get that carbon fiber lip at what’s the website
Hey I found it on eBay
Hey bro how did you get the middle piece to stay in there? Cause you only drill the outside pieces to the bumper right?
hey bro, if u watched the video i show myself drill everything in. hope that helps
Link? To a gloss black one I got one and it didn't fit
Honestly it’s from eBay so like they coke and go
Where’d you get your seat covers?
they're old, from CARiD
You’re in Broward county? im in Fort Lauderdale
I'm normally in Broward area. I travel a lot
Hey what's good bro, loved the video. Could you please drop the link to that front lip.
I'd love to homie. However , the link that I used to buy this is on eBay and the listing no longer exists.
@@DrivenByChris oh aight, no problem bro, appreciate the reply🙏🏽. I've been trying to find a lip similar one for my 2013 jetta s but just can't find it.
@@matteovalenti849 try eBay or ecstuning
Looking good!
It's the little things .
What lip was that just slammed my car a little lower on solowerks was looking to find a lip
this one is actually sold out . Well it was last time I checked. It's just an ebay lip
Can I get this bumper lip, I’m in South Africa?
this is a facelift (mk6.5) bumper that came with my car. As u can see in this video I added the front lip. I'm sure u can order this. check ur local vw dealer or ecstuning.com
Is a 2016 tsi s Jetta and a 2016 gli Jetta the same for splitters and diffusers and side Skirts
I really depends. Most the time yes
Where did you get your fog lights? I also have the 2016 vw base model & it’s completely stock & I want to add a few things, let me know.
I got them online from ecstuning. Installed myself , wired by a shop.
Hey man i have been looking for a carbon fiber front lip for my car forever and just cant seem to find one. anyway you could post the link? I drive a 2017 mk6.5 jetta but its a GLI idk if that will have compatibility issues
it will fit but it'll be tricky, just keep in mind this is fake.
Can you tall me where did you buy find the front lip
It was from eBay a long time ago
Where did you get this awesome piece of art ??
surprisingly.... eBay
@@DrivenByChris post link in description if still avail
@@7csquad yeah , I’ll find it when I get home
Ebay doesn't have this particular type of carbon lip for the jetta acctually I do have a 2014 MK6 GLI maybe it'll not fit
@@alfredocarreno575 yeah the bumper of the 2014 is different than mine. I will make a mod list video n link it in the description.
Did you wrap your side markers on your headlights? If so it looks surprisingly good
Yeah I did! I thought it was pretty bad but that's ok, I will re-do it soon
Looks awesome man! Gonna have to get a front lip for mine! Do you have a rear diffuser on yours or no? If you do I would love to see a vid on installing it
Thank you! In regard to the lip. I do actually
Here’s the link :
th-cam.com/video/0TlP91ybcws/w-d-xo.html
I might be getting a new one soon. Depends on ecstuning . They’re supposed to be making carbon ones.
Carbon fiber babyyyy
yeah baby :)
please drop the link to this product thank you
I bought it from an eBay seller who no longer exists. You have to find it for sale from someone else on eBay
Can you link the lip? Wanna see if im lookin at the same one!
it found it on ebay, the specific one i bought is no longer sold
Can you link me to this?
If the specific seller still sold it, I would. However u gotta find someone else whose doing it
Where’d u buy it from?
eBay
@@DrivenByChris Do you have the link?
@@willie123811 It says no longer available. I will do some digging. Most auctions on ebay expire and come back.
Do you have link?
unfortunately no. It was off of ebay and every time it expires, a new link is made.
Can I get the link ? To it
It’s on eBay . Challenging to find.
@@DrivenByChris no biggie love your build man you got insta for your car?
@@juanhidalgo6234 I’ll find the link . I have to order another lip. I broke this one tonight . I do, my insta is the same as my YT. It’s also linked on my channel home page and in some videos
@@DrivenByChris May I have the link for the lips. Supporter of your channel here!
@@colintham6745 Thank you! also ...It's hard to find. But it's on eBay! I keep forgetting to link it. I will soon.
I wish I could find one for mine..
I'm sure theres plenty?? eBay is a nice place lol
Nope.. nothing that fits.. not yet
@@TheSrt1582 there has to be some out there. I could of sworn I saw some
Did you get this from Ali express? I see one there but wasn’t sure if it’s gonna look the same like yours
@@ALPHAWOLFgg nope , eBay
wow!
i have the plastic one these! wow youtube be spyin on me....lol.
If you know what “ cookies” are they got you lol.
And this is why we don’t buy Amazon products for our cars.
why?
@@DrivenByChris cause they are cheap
@@DrivenByChris not that your Jetta looks bad but u can tell it’s from Amazon man. I’m currently doing a Jetta myself so this video popped up under my recommendation
@@thewholecountryislaughinga8440 interesting, most don’t think it is. It’s actually from eBay . Most like it on my channel. Also I didn’t want to spend a lot to get a better looking lip just for it to break for being too low.
@@DrivenByChris just my two cents didn’t say it looks bad just can tell when parts come from those places. If u dd it I understand then I personally don’t dd any of my modded cars