The intro song key is getting higher, fearing for Matts vocal chords: falsetto option way before Christmas Eve. Union Jack: lf the motif orientation is repeated elsewhere it will probably be both more challenging to achieve and interesting visually. However having seen the community vote post diagram l'm banana split.
Regarding the key, I replaced the ignition barrel I think. I'll have a look, needs a new connector block I know that much, someone choc-blocked it together.
On the 45 will look better I'm pretty sure. Asymmetrical is going to be a really cool aesthetic. When triumph did it it looked great on the 675 nose fairing at the angle even with it painted. .
When you took that lock apart a little tiny spring was left behind when you put the rest aside. You can still see it when you brushed the caliper hangers. Hopefully you manage to find it before it’s lost to the world.
@@thedirtyworkshop cast Aluminum motorblocks. They put them into ovens over here so the frozen bearings slip right into them without needing to hammer them in. The rest is physics I guess. If that bearings are closed they remove the inner plastic and (re-)pack them in situ. This is old habit, nothing gets damaged or sloppy, that claim is / worries are nonsense. This techniques are long proven in Automotive and Aviation industries. No sane person will just bash them in "dry" Berzerk style, esp not you... since you know about expansion coefficient of the materials.
jesus christ get rid of that crap sandblasting gun ,get a decent one with a boron nozzle ,and get a decent foot pedal fitted . i hope your not using them crap stick on throw away plastic sheets on the window . get rid ,buy yourself a piece of tempered glass ,i found that kitchen tempered glass cutting boards work perfectly . make sure it,s a clear one ,then fit some stainless steel mesh sheet about 80 mesh below it on the inside .with about an inch gap . that will protect the glass , i copied this design from an old snap on cabinet from the 60,s works great . and no more crappy plastic film protectors .
"get a decent one with a boron nozzle ,and get a decent foot pedal fitted" - Too late, already got one. "buy yourself a piece of tempered glass ,i found that kitchen tempered glass cutting boards work perfectly . make sure it,s a clear one ,then fit some stainless steel mesh sheet about 80 mesh below it on the inside .with about an inch gap" - Too late, already done a video on doing this. Next
Asymmetrical 👍
I don’t know,mate,I don’t know,don’t ask me,mate.I don’t know……..On the piss obviously.
Love the colour choice for the tank.
I know right I want to do it black but went for *******
The intro song key is getting higher, fearing for Matts vocal chords: falsetto option way before Christmas Eve.
Union Jack: lf the motif orientation is repeated elsewhere it will probably be both more challenging to achieve and interesting visually.
However having seen the community vote post diagram l'm banana split.
I like flags that look like wind is moving it,so ripple smooth
Ahh, the banana makes a comeback!
Yellow, it must be yellow!
My suggestion is 37 degrees to the right from the vertical plane.
Move the centre of the tank piece to a more off centre position, i.e. top left quarter.
Regarding the key, I replaced the ignition barrel I think. I'll have a look, needs a new connector block I know that much, someone choc-blocked it together.
Matt If I remember my yam divvy, 1 key for all locks, seat, tank and ignition.
Got to say it,,,,,,,,,
One key to rule them holes.
On the 45 will look better I'm pretty sure. Asymmetrical is going to be a really cool aesthetic.
When triumph did it it looked great on the 675 nose fairing at the angle even with it painted. .
Matt (tough) black or banana yellow.
Yup, I have all sizes of those screwdrivers. They are awesome!
Haven't been watching for a while but I really like the new editing.
Loving these videos
You're going to make it like dell's banana then?
I'm voting for diagonal.
When you took that lock apart a little tiny spring was left behind when you put the rest aside. You can still see it when you brushed the caliper hangers. Hopefully you manage to find it before it’s lost to the world.
On the piss would be better in my opinion Matt..really looking forward to see how it turns out, cool idea 👍
I think it'll look better at 45°.
Would it not be easy to buy a new lock kit for the bike?
Wouldn't it be easier just to buy a new bike?
So is your tank design going to be similar to dels drilled tank cover thing?
How much tougher is the baked Cerakote compared to the air dried stuff?
7
@dirtygarageguy I thought so
Not 100% but im sure theres a roll pin holding the shaft into the bottom yoke, a right pain to get out too
+1 for on the piss.
On the piss, 💯%
Ef zee 6?
When you press things with a hard steel shaft into an aluminium block is damaging the bore a concern? Wouldnt want a sloppy tripple tree lol
Look at it this way, they did it at the factory...
You heat the Aluminum and freeze the steel.
They put steel bearings in Aluminum housings since ships learned to fly in late 19th century, lol.
What aluminium?
@@thedirtyworkshop cast Aluminum motorblocks. They put them into ovens over here so the frozen bearings slip right into them without needing to hammer them in. The rest is physics I guess.
If that bearings are closed they remove the inner plastic and (re-)pack them in situ.
This is old habit, nothing gets damaged or sloppy, that claim is / worries are nonsense.
This techniques are long proven in Automotive and Aviation industries. No sane person will just bash them in "dry" Berzerk style, esp not you... since you know about expansion coefficient of the materials.
Skewiff for sure. Some sort of depth it would have
42.2 degrees
UJM-II : Union jack motorbikes
merry christmas
On the piss and offset!
Do you hear me??!!😡☝🏻
So with it being a "union jack" dose that mean you are going to mount it on the jack mast of a ship? Otherwise it's the Union flag
It always a flag, stop being a tard.
@dirtygarageguy I knew this would get a reply it's the only reason i said it 😂
On the piss, definitely
On the piss for the tank
Skew-whiff, this is the way.Also, I have spoken
i dont believe you, i think you are taking the piss with the tank.
Good luck with that
@@thedirtyworkshop did u do a render or something of this idea? i honestly think it will be really hard to pull it off and dont look like shite
on the pesh
At an angle would be more betterer, 40/60* or whatever.
cross on the tank should be on the piss..
On the piss looks better
On the piss please
on the piss would be better just encase something else on the bike is not on centre and stands out against the central union jack.
Something else isn't central, like what, isaac?
On the piss, otherwise it would be ..................
The garden snake mentioned you in his newest video 😀
th-cam.com/video/7et_dfiyCWA/w-d-xo.htmlsi=GMve0Js9_MNgGnyY
I'd call you a kent but you don't have a depth or warmth 😂
On the piss, please. A bit different.
Vertical and Horizontal. Option 1
09:31 I love grey and darker grey 🤣🤣
@ th-cam.com/video/dhNRRj9j4iM/w-d-xo.html Bloody hell!?...I'm so happy that you have an artistic balance to your science knowledge :-)
Beauty is in the eye of the beholder!
sounds like inspiration from a humble airborne operator on the south coast! on the piss Matt
@@remfanuk1970 he is the light of my life
on the piss
❤👀👍
On the piss
On the piss.
Union Jack is a union flag flown at sea Matt?
It is a flag. Always has been.
jesus christ get rid of that crap sandblasting gun ,get a decent one with a boron nozzle ,and get a decent foot pedal fitted . i hope your not using them crap stick on throw away plastic sheets on the window . get rid ,buy yourself a piece of tempered glass ,i found that kitchen tempered glass cutting boards work perfectly . make sure it,s a clear one ,then fit some stainless steel mesh sheet about 80 mesh below it on the inside .with about an inch gap . that will protect the glass , i copied this design from an old snap on cabinet from the 60,s works great . and no more crappy plastic film protectors .
"get a decent one with a boron nozzle ,and get a decent foot pedal fitted"
- Too late, already got one.
"buy yourself a piece of tempered glass ,i found that kitchen tempered glass cutting boards work perfectly . make sure it,s a clear one ,then fit some stainless steel mesh sheet about 80 mesh below it on the inside .with about an inch gap"
- Too late, already done a video on doing this.
Next
You're supposed to smash the bearing off the yoke with a cold chisel and a massive hammer!
I've seen tutorials from a motorcycle expert...
I've seen that to... infact, I can't unsee it !
On the piss
On the piss
On the piss