Recording with Positive Grid Spark 40 Amp
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- 2 quick tests:
===========
recording directly in Garageband on the same iPad the Spark app is running on
recording on your computer via USB
1:20 - recording on iPad Pro
3:40 - recording on iPad Pro using Garageband's amp sims
4:30 - recording on computer via USB
Cables needed:
=============
New Macbooks, or iPad Pro with USB-C (and no dongle) - amzn.to/2TC52p4
USB-B to Lightning cable (regular iPad/iPhone): amzn.to/2XoJ61M
Thank you Jason. Yours are the best Spark videos I've found. It's so great to see footage from someone who actually bought one and waited and waited and waited like the rest of us. Your videos make waiting for my amp to arrive a bit easier. The vids from the guys who got a free Spark quickly in exchange for a positive review just annoy me lol.
Did you get your amp?
Yes! I've had for about six months now. I use it almost every day. It's actually better than I expected. I love to play a few chords into it then have it come up with a rhythm track that i can jam with. I compose solos and lyrics while it loops. Endless fun. Thanks for asking.
@@Sonic_Ox cool, I got mine a couple of weeks ago. I guess they had them in stock light away after all the complaints. Got mine in 2 weeks. I didn't like it the first day, but then something clicked, now I love it. Have fun. Happy New Year.
@@itsalwayssomething7490 Happy New Year amigo! Yes I love mine too. It'll never replace my old Fender tube amp and pedal board but for $224 it's among the best guitar toys I've ever bought. Great practice tool.
Thanks for this video. Seen a lot of youtubers demonstrating this amp without properly explaining how they record
Nice video. You can get rechargeable power packs that you can use with the spark. I have mine stuck to the rear of my spark with velcro. Makes the spark fantastically portable.
Good job Jason keep going
Cool, expecting my Spark this month, 1st video I've seen if seemingly hundreds that dove into recording. Can't wait to get my Spark, good quality things are well worth the wait.
When did you purchase your spark?
@@FableFrenzy from the manufacture positive grid. . www.positivegrid.com/spark?SparkBurrellExt
Not sure who else is selling it online other then them...
@@airgliderz hey man that wasn't the answer I'm looking for. I was asking when did you purchased the product.
@@FableFrenzy about a month ago, well worth the wait, like a fine wine...
Awesome now just need a mic plug in, bought one of these awesome little amps
2022 thank you for this!!❤
Jason - I have an Ipad mini 2 I beleive. I can use garageband with my spark 40. When I listen to back to the recorded guitar in garageband from the spark 40, the volume is low and the quilty is not even near what I'm hearing through my headphone hooked up to spark amp. When I listen back I can hear the effects from the spark amp in garageband but something seems off... Just doesn't sound the same - guitar tone from headphone vs. the recorded guitar tone in garageband. If that amkes since... I'm using the correct cord from amp to Ipad. I have the master volume around 70%-80%. Anything else I'm doing wrong?
Hey Hey! Great vid! I'm going to try to make mine portable by using some craftsman 19.2 volt batteries, the ac/dc adapter lists it at 19v, and it should be just fine. I'm just curious how long the run time is
This doesn't sound like a stereo recording to me. Ive been told the Spark amp USB connection is a MONO signal. I'm getting the Spark in about a week. Ive also ordered a mini-stereo-male to dual 1/4" mono male plugs. Im assuming that the headphone signal is stereo, as this is touted as a stereo amp. Theoretically, plugging this cable into the headphone jack of the amp , and the 1/4" inputs on my audio interface should allow me to monitor and record in stereo, and take advantage of my studio monitor speakers and subwoofer to improve the sound even further. Can't wait.
If anything I think it would be dual mono. I just got one of those cables so I’m going to try it out. Either way, there are no stereo effects on the delay or reverb pedals or any interplay between the L and R channel that I could hear in headphones, but I know some folks say “it’s stereo”.
can I still hear the amp and effects when I record on my Ipad? Or will It always sound like clean tone until I play the recorded guitars?
Got my Spark after waiting three months. Well worth the wait. Updated its firmware on day 1. Great sounding easy to use amp I use every day practicing. Sometimes connect to my 800watt high end sterae for big awesome high end sound quality in stereo. Connects to my PC easily, Connects to my Android phone and tablet reliably and fast. App works great, intuitive to use, great tones easy to adjust to your taste, but is not required to use amp. Understandable wait considering this amp is pre purchase, the COVID pandemic closing the factory for a bit, the virus impacted factory suppliers and delivery systems world wide. Pditive grid kept me informed, a good company.
Hey Jason. Did you ever try recording on you iPhone? (Thanks for your clear, “calm” analysis)
I haven’t tried in a while, maybe that’ll be the next video!
Hi! Do you use a stereo or mono cable from the lineout?
Thanks, Kalle 😊
usually mono, but I have a cable that is 1/8 inch to 1/4 stereo that I used for one of my videos.
Thanks Jason, always good to see videos from someone in the GTA... so I ordered USB B to lightning cable on Amazon and got it today. When I plug it into my Ipad and have Garage Band running, I see that the input the In channel changes to USB but I can't seem to get any sound levels.. did you do something different with your iPad?
Nevermind! I found out by actually looking in the Spark manual that I have to use the Music Volume knob on the Spark. I get great levels now. Thanks again!
Steve Hayden thank you for telling us the answer!!! i needed it 👍🏼
So instead of buying a new cable USB-B to C couldn't I just use the cable that comes with the spark amp and plug it into a standard USB hub ? Then connect the hub to my iPad using a USB to C cable ?
Hi Jason do you know if the spark amp is compatible with the ipad pro 2021 as an audio interface for recording in garage band. I have tried to connect my spark amp to my brand new ipad and it isn't being recognised in garage band as the channel input. Instead GB is recording the dry guitar sound from the mic of the ipad instead of through the spark. I'm using apple cables and connector so I can only assume its not compatible with the newest ipad pros. I've reached out to positive grid with this question but no reply as of yet. I really need an answer because if the spark isn't compatible with the ipad then I'll return it and get a cheaper model. Have you experienced this issue at all?? Is there anything else I can try as I can't help thinking I've made an expensive mistake 🤦♂️
It’s worked for me with that setup. There is an option on the bottom left while in track mode view that lets you switch the input between mic and usb. I’ll take a look again as I haven’t recorded with it in a while.
Hi Jason. I ordered a Spark and I was under the impression I would have to jump a cable from the headphone output into my Focusrite interface to record in Logic on my Mac. Just watched your video “recording with Spark” and it appears that if I use the usb out on the Spark to a usbC input on the Mac, Logic will see the Spark for recording guitar tracks. Is this assumption correct. Thanks, Jeff in KY
Correct! Just hook it up by USB and you’re all set! You’ll see “Spark 40” as an audio option. I set the output to my interface though.
The Spark is a good sounding amp and I am happy with the sound, athough, it does seem strange that to be able to record into a pc, you have to go into settings and change the input AND OUTPUT to Spark. With most other amps, you just install a driver and it shows up as a input option in your DAW/pc...easy peasy.
Am I the only one who thinks it’s insane that Spark literally has a recording section built into the app but you can’t actually use it to record the signal from the amp itself? What is the actual purpose of that part of the app then? I was hoping to play through headphones and be able to record that way but somehow that isn’t an option. Unless I’m missing something that really stupid.
agreed! I guess it's ok if you just want to quickly record your playing technique, but it sucks if you wanted to make instructional videos with good quality sound.
Have you played around with recording on the iPad more? How easy is it to record a song using just the amp and the iPad? How much storage does a full recording take? Would love a follow up video with a quick full recording.
I'm doing this video tomorrow. Doing a live recording with acoustic, bass, and guitar with everything done on the iPad.
Hi..Im using a regular iPad with lightening connector. I have an adapter which has a lightening plug to allow charging and a regular usb which has my usb B cable from the spark to that connection. The input volume from my guitar is VERY low when I record. I have the Master volume at max on the spark. Do you think the adapter is a problem instead of going straight in from the spark usb B to the iPad and I'm losing input volume??? I cant find any other settings for the input to boost it. Guitar volume is on 10 as well. Any thoughts ??? Much appreciated with any ideas you may have.
it might be the adapter, it might also just be picking up the guitar sound from the iPads mic instead of the cable?
This is the trick - recording in say, Cubase on a PC? You’ll have to download the sparkusbASIO driver from positive grid. (Would be nice if they told you this) and every time you want to record with it you must change to that driver (which I find to be a pain.) It tries to change my sample rate to 48kHz. And to listen to what you’ve recorded on your monitors you have to switch the driver back etc. Not ideal for firing off multiple takes. But just amending this great vid from a pc perspective;)
Jason,
Can you record using Spark amps as your input into a Mac with Garageband and monitoring while you record? I tried monitoring and it was boomy and had lots of latency...ugh.
Garageband doesn't have any setting to deal with latency so I usually turn off input monitoring and listen to my guitar through the Spark directly. I'll either use ear buds to hear what's coming out of GB, or my studio headphones with one ear piece off.
Thanks for the video. I'm following your instructions on using the Spark with my IMac. However, when I want to use distortion from GarageBand it seems to lose some amplification capabilities (with a weird fuzz, not as an effect). I did lower the output on the Spark and have been using the Noise Gate to control to this. It sounds better but still sounds funny. It seems I can't use the Sparks interface program? Or download the Sprak app into my IMac? Can you clarify this?
Hi. I know this video is 4ys old but I can’t make it work.
USB-b to USB-c cable to lightning adaptor. Help thanks.
Question: I’ve read that the Spark doesn’t record tracks in stereo but only mono when direct lined in. Is that true and is there a workaround? Thank you and great video 👍👍
It's mono only but it doesn't matter because the effects aren't stereo anyway - meaning there is no interplay between the left and right channels. If you really really really wanted to record in stereo, you could mic it with two mics, one at the edge of each cone...but I don't think that'll make a difference.
This is amazing. Thanks so much for this. My spark is on the way and now I can forget purchasing an interface for my iPad Pro. Just need to order the cable. Can you make a video of you recording heavy distortion with palm muting (chugging/breakdowns). Thanks again!
I too would like to see you recording some heavy distortion. It’s a slightly different situation. How do we adjust?
Jordan C hey, so I’ve already received my spark about two weeks ago. I also recently purchased a MacBook Pro so I’ve been doing some recording with that and the amp is by far better than anything else I’ve used before. Since I picked up the MacBook I haven’t tried using the iPad Pro to record but, I will attempt to sometime soon. I’ve noticed the tones you can download sound better than anything I can create. However, all the tones I’ve found need to be tweaked a bit to sound good in recordings. The main issue I find is that since I use a lot of palm muting and chugging, I always have to turn down the bass. I have had a couple issues with the spark though. One is the amp will randomly freeze and will not pump sound at all, either digitally or out the speakers or headphones. I have to unplug the amp for about a minute and retry. Second issue is the connection to my iPad, sometimes it will not connect. I think these issues are a bit problematic to consistently record but when I just want to record some riffs I’ve come up with it’s amazing. Another issue I’ve had is that I ordered the gig bag/carrying case with the spark and it has not arrived yet. However, they informed me that they were delayed in an email sent a couple weeks ago as well.
Hey UTUT, I do a lot of palm muting and chugging myself. I love those tones but yea, recorded they are a bit muddy so I’ve had to treble up a bit myself. But I’ve had no technical difficulties in the department you mentioned. The thing is with positive grid running so behind I’m not sure I’d hand anything over to them for repair at present anyway. Ha. But that sort of sounds like a malfunction you’d want to address in a new piece of gear. It seems everyone agrees in one way or another; The Spark has awesome potential (perhaps even the beginning of a new kind of amp - rather than practice amp, perhaps studio amp???) but is filled with rough edges depending on how you use it. My next experiment will be recording from the headphone jack as a stereo output and compare the quality of that vs. the usb fiasco necessary to record in a pc daw:)
Jordan C yeah I did read your other message about the issue with the daw on pc. I have not experienced the issues in about a week but I haven’t played much either. I’ve been using a boss katana air to record and love the tones but since I received the spark the tones are just so much better I usually just plug in and play with headphones for hours at a time. Just not everyday.
Can you do this on the ipad as well? Say record a guitar track using built in guitar sim and then go back and reroute it through the Spark 40? All in ipad?
good question. I guess it would be possible using another audio interface that has multiple inputs and outputs.
Would you be able to record vocals by plugging a mic into the input jack, or would it sound weird?
yes you can, I just did a video on this recently: th-cam.com/video/Tvr2b0-WED0/w-d-xo.html
Hi there - I’m trying to record from Spark -> PC -> Studio One (or Reaper). But for some reason my Spark doesn’t play back the audio? I can record and see the volume changing in the DAW but I just don’t get sound out the Spark. A monitoring issue? Any clues? Thanks!
The teeny music knob controls the daw playback, I’d check that first!
So it is mono recording only? Stereo effects from Spark amp are lost? How about Spark headphone interface, is that stereo still? So you could record stereo from headphone output?
yes, you could record through the headphone jack and preserve the stereo effects.
Did you have any issues with sound levels when recording?
I’ve connected to GarageBand and it records, but the levels are too low when you listen back to the recording.
I’m monitoring as I play through the Spark’s headphone out, and my playing comes through at the correct volume, but records far too low in GB.
I do turn the 'master' knob up to about 70-80%, that's what controls the input signal over USB.
@@cleverdood 👍 thanks. I hadn’t even noticed it had a master volume tucked away between the other knobs 😂
Let me get this straight... you are using the Spark as an IO and a monitor for Garage Band, or are you using the audio out of the Spark with no monitors of the Garage Band but only listening to the Spark?
for this test, the I/O setup in GB was the Spark but I turned off software input monitoring for the track I'm recording to avoid feedback/latency. The Spark is basically going to act like a monitor, same as if you were using a regular audio interface so you'll hear all the other tracks from Garageband while recording. You'll hear your live playing through the Spark amp itself, but with input monitoring turned off, you won't hear the Spark signal coming back out of GB.
This video was just what I was looking for!! Thank you! Did you get a chance to test the usb to lightning cable yet?
Todd Cash not yet, cable is being shipped as I can’t find on in any stores near me.
I think I have a lightning camera adapter lying around that I’ll try when my spark arrives. That’ll allow for usb and power for the iPad at the same time.
Hey Jason, I have a quick question you might be able to help with. I am using PT10 as my DAW. I am able to select the spark in the DAW with no issues. My issue is that, if I try using the spark with a click track in PT, the click track is in the playback of the audio. I have tried to set the output to “built in output” to use with my monitors, but it is defaulting back to the spark.. kinda at a loss on this.
Only thing I could think of is the built in mic is also recording the audio? Maybe it’s also connected to the Bluetooth audio?
Thanks for the video! Does it need a special configuration with FL Studio with Spark 40? It's not recording with me, even though FL studio recognizes Sparks, but it doesn't record any sound
Louay Al Jondi it should work with any DAW provided the DAW is compatible with the version of the OS you’re using. For example, the free Presonus DAW it comes with isn’t compatible with MacOS 10.15.xx so it won’t recognize the Spark at all.
@@cleverdood Thank for the reply. I have windows 10. FL studio recognizes Spark 40, but when I select it, I can't get it to record in the Editor. Any advice or spark is not supported on Win 10?
Yes Presonus doesn't work with it.
What really would be cool if you could capture a backing track from TH-cam while using the spark and recording at the same time.
Add your mp3 youtube backing track as a track in garageband. Then record the guitar track on top as a 2nd track.
Thank you for this!
Hi there, I'm using my spark as an audio interface for a project in my guitar class and we're told to use the DAW software called SoundTrap and at first I thought "wow this is brilliant it works great!" but after recording I noticed something annoying is that no matter the volume setting of the track in SoundTrap or the master and output volume on the amp itself, the recorded volume is always really quiet which is just really irritating me. Any advice or tips to help it record louder?
That’s an online tool right? If so, I wonder if it’s picking up your computer mic as the audio source instead of the Spark?
@@cleverdood Hi there, I just got it all sorted out haha. Wow thank you so much though for the quick response, your video was very informative I appreciate it :) you just got a new subscriber
I get -40 of noise with nothing being played - using usb to Windows 10 --- using ASIO4All ---- Headache --- Also the input levels seem low recording on OBS
Just ordered mine. Can't fucking wait to play
I’ve heard that there is quite a bit of latency when recording did you have any problem with that? Still waiting for mine!!
yes, there is definitely latency. I'll look at that more when I compare recording on the iPad with using Logic Pro X on another video.
Thanks Jason, that was very helpful. Since COVID, I'm sending my guitar instructor videos of my playing. I use an iPad, but the sound/video is not very good. from your vid, I should be able to get a good sound recording. How can I also add video? All the best, Kevin.
I record the video with my phone and hook up the Spark via USB to my computer to record the audio directly. You might be able to use Garageband on the iPad to record the audio, but I think it only captures your playing and not the backing track.
I'm going crazy trying to figure out the song you're playing in this video. It's very familiar. Please let me know. Thanks
realpool it’s an original song my band is working on
Thanks for this video 👍🏻🔥
My pleasure!
Perfect dude! Can I plug a Bluetooth auriculars to spark?
if you mean bluetooth headphones, no. You can only connect over bluetooth to control the app or to stream music.
I dont have garageband or logic. I have actually no recording software. Do you know of any free recording programs that the spark would work with?
Rob Roblox there’s a free version of Cakewalk and Traktion Waveform is also free.
@@cleverdood ty
Can I use a other app to recor in then garageband? Got older iPad.
yes, the app store has a bunch. search the store for 'daw' and you'll find a couple free ones
Oh god, seems like this can do that one thing my VYPR1 could never do (there are many but my one main pet peeve)... it can record without losing output. This is the one feature that makes me realize I'll have to buy this thing :)
Trust me, if you have an amp with a USB out that goes silent when used you end up suffering a bit because you either go through the whole chain or end up miking the darn thing while wearing headphones effectively negating any of its advantages.
Does anyone know if Garageband needs drivers etc, for a Spark Amp, its not recognizing the input in the garageband software.
no, it doesn't need drivers. If you press "CMD + ," that'll open up your audio preferences and you should see "Spark 40" as an option. If not, check your "audio/midi setup" in your system preferences.
I'm going to be ABSOLUTELY 😞 disappointed if I don't receive the Spark Wed Like they told me! I pre-ordered it in the first week of May.
Thank you
did the usbC to lightning cable work on iphone ?
yes, works great!
Hi can you use a USB B to C on a Samsung tablet?
Do is the spark mainly a iOS thing? Or does it function well with pc?
as far as I know, there are only mobile apps (iOS/Android)
Should I get this or the Boss Katana 50 MkII?
Hiya, have you tried vocals? How did it sound?
I only tried it to see if it works, proper test coming soon!
how do u use the different sounds the spark amp to record it on the pc? Because I've only been getting the clean sound
zakiy daulay use the Spark mobile app, or the settings knob on the left side of the amp
@@cleverdood i tried but it was still just getting the clean sound. im using fl studio
@@zakiydaulay4390 ah, ok. It is probably something related to direct monitoring. If enabled, 'direct monitoring' will probably play your raw guitar sound, not the sound that is being processed. So you would hear the processed sound coming from the Spark amp, but a clean 'direct' signal through the DAW audio output.
Have you figured out how to record guitar along with a quick jam track?
use headphone out to mic in
any way to record also the jam track and the guitar in input 1 of the spark via the usb cable into garageband?
This thing is new. So obviously we’ll all know more soon. I do love the tones I’m getting on this gizmo. But I’ve never recorded via usb. How do I find it in Cubase pro 10? Do I have to manually switch from my Motu interface drivers and engage the Sparks?! And if so, it’s not showing in my list of available drivers. Finally, do I have to have the app connected. I’ve got presets saved on the hardware. But maybe the app is part of the necessary signal chain. Clearly I don’t know. But I loved your to the point video style. Even if you don’t have these answers? You still have a new subscriber. Thanks man :)
The problem I’m having is I can’t hear the audio from the amp that is played through TH-cam/music etc. Any idea how to get this playing?
I’ve had this happen a few times. I restarted my iPad and opened spark and reconnected and that did the trick. Give it a try.
Yeah I think sometimes the software of the amp gets conflicting signals from Bluetooth and the phone/tablet spark app...sometimes if I play for a long time I can’t even switch my sound settings using the knobs and buttons on the amp itself like it’s frozen or something...just disconnect everything and reboot everything that’s using the amp
Anyone use this with PropellerHead Reason? I can’t seem to get this as an input , even though it shows up in my windows microphone.
I was having the same issue - the simplest fix is to have the amp turned on and plugged in before opening Reason - the device then shows up as "DX Speakers (Spark 40 USB)" in the driver drop down menu.
I have the same Question did you solve it?
Any idea how to record the drum and bass backing track from spark to garageband?
Just plug the headphones out of the spark into an audio interface you’ll record everything coming out the amp
hey Jason how do we download all sounds from spark amp i am using my iPhone
go to 'tone cloud' in the app
found it thank you question when hit the create button then you play some cords then it plays back just bass & drums and shows you the cords you played , but doesn't play the cords with bass & drums ! is there a way to hear all playback ? to bad they don't have a looper built in , i wanted to add in a lead to all play back !
I have Signal yet how do I record
wait, we do not need any audio interface? we can use it directly from the spark amp is it ?
correct! Just plugin the supplied USB cable from the Spark to your computer and you're all set.
wow thanks a lot for this video !! but if I’m using an iPhone 7+, will it still work?
MirzaVlogs FF the Spark app works with any iPhone/iTouch/iPad that uses iOS 11+. For recording, GarageBand should work, but the latest GB update only works with iOS 13 and later.
Hey, cool stuff! I only have android and PC so can't try it out yet. I might get an iPad though because of your video so I hope they're giving you some free shit man! You've earned it!
I'll subscribe and learn a thing or two while I save up for one ✌️ Just got the spark a week ago after waiting since January, such a fun amp. Well worth the wait!
I HIGHLY recommend doing that!!! I'm an Android guy I HATE APPLE. lol BUT, what this offers, there's no comparison!!!
can you use it as an interface only? meaning theres no sound coming from the amp itself
yes. I just tried this. If you have input monitoring off in your DAW and turn the 'output' on the amp to zero, you won't hear anything from the speaker and it doesn't affect the signal going into your DAW as the master and gain control that.
@@cleverdood Awesome, thanks!
Hey! is there a way to record the sound of the spark amp but let every sound go out of my focusrite audio interface? i dont want any sound coming out of my amp so that i can record all in silence but still hear what im playing trough my focusrite audio interface. I cant seem to find a way to do that, anyone any suggestions?
Yes, assuming you’re connecting via USB, you can turn the output knob on the Spark to zero and in your daw, set your input to the Spark device and the output to your focusrite. Another option (on a Mac) is to create an aggregate device of the Spark and Focusrite. On a PC you’d need the ASIO4 All driver to do this.
@@cleverdood idk its because i have ableton live lite but i cant seem to find the option "input"/ "output" device in the audio setting. I have only one option audio divice. :(
The Spark documentation clearly says it does NOT work as an audio interface with iOS or iPad devices. Mac and Windows only. You can see in the video that Mic is selected as the audio input, not 1 which would show as a channel number of an interface.
isn't the spark an audio interface?
Yes
Is there a way to remove the latency?
depends on which DAW you're using, with Garageband, there is no option to reduce sample sizes (which reduces latency). Logic Pro X has latency compensation, and other paid DAWs for PC and Mac will have options for that as well.
Can the Spark be "bluetooth" paired with a Macbook?
Stephen Buono yes
Does this only work for garageband?
zakiy daulay no, it’ll work with any DAW.
Is the spark can record thru android phone ?
Chun Invasion as long as you have an app to record with, it probably will but I don’t have an android device to try it.
Have you try the bandlab App
I received may spark amp without cables and software
It's supposed to come with a power cable and USB cable, you didn't get any cables at all? That's a bummer!
whats the model on that i pad pro
I think it's a second gen iPad Pro, I got it a couple of years ago.
so the ipad pro is the way to go since i am new to all this tech stuff but i do want to record my own music
@@freddysnightmare8391 hard to say, it is easier on a real Mac but it’s doable with a iPad Pro for sure.
I learned it
How did you get this already?
I ordered it on Dec 1 last year. Seems they’re are shipping a lot of them now.
Jason Little when did you get it?
Last Wednesday
Jason Little oh boy
FYI the company knows they are in the hot seat regarding filling orders. They haven’t even delivered the early bird pre-orders yet. I’ve got mine but some friends that ordered a titch earlier than me still wait. The more people that get them the more the “tone cloud” community will grow and the product will be much better. Right now, it’s a baron land.
How can I use bias fx with my spark?
you could hook it up to your computer, bypass everything in the Spark app (by swiping everything up, and turning off the amp head), and then you'd be using the Spark amp like an audio interface.
Jason Little ahhh, of course!!! Thanks so much buddy! I will try that.
ok, worked in theory but I am getting so much "white noise" from the amp itself(also using the spark speakers as output) it was crazy. tried filters, gates...everything.
Diego Fiorillo weird, I haven’t tried it myself, but figured it’s be like any interface.
@@cleverdood Give it a shot and let me know your findings???
Whats a dos?..lost me