BMW F30 328xi N20 engine replacement

Please enjoy my first car/random video. I replaced the engine do to timing chain failure on this F30 with a N20.
I would love feedback/comments.
Once again. Thanks for watching
/ glenndaquino

[@Relicsun]

One of the best BMW mechanic I’ve ever seen. Great job!

[@scottcrawford4148]

Thanks for making the helpful video.

[@LuckofPablo]

Team work makes the dream work 🤙

[@glen7201]

I know this is an older video, but I have replaced about a dozen or so of the n20/n26 in 320,328,X3 models. I lift them out of the top,I have had no issues,and I just leave the exhaust up as well,I will pull the hanger down next to the trans for some flexibility when reinstalling but that is all. I actually just did a 2013 328 this past week,I put a used engine in,but I replaced the chain and components first.
I have 4 more 2013 models in now for either chains or engines, (one more 328 and 3 X3s). I am not questioning your methods,just curious why you drop out the bottom.
I will realese both engine mounts and lift with a jack stand enough to get the carrier past the engine cradle,and I only release the one inner nut and bolt on the lower control arm,the whole knee assembly will pivot out to remove the axles.
And I pull the intake for easier access to bell housing bolts on the top. This last one took about 18 hours total including the chain replacement, I do a compression and oil pump test while they are still on the table as well,and once back in the car I do my final crank shaft central bolt torque,everything else is done on the table before installation. It looks like you are with a BMW dealer,so I assume this is how they show it to be done,but I am just wondering if there is a reason I shouldn't be taking them out the top. Thanks!

[@Unknownf30]

Send me your contact info if you’re interested in doing a job for me. Need n20 replaced timing chain went out

[@ukuk7727]

Where are you from? I also need to change the engine of my BMW 3 series car

[@russellhackney854]

Hey do you guys ever notice a slow clicking noise from the turbo (New Turbo) after a motor swap?

[@Unknownf30]

Can you please contact me in regards to swapping my n20? Timing chain recently went out. I’m willing to deliver everything necessary to get the job done assuming that you’re located in the US.

[@mikemartinez661]

Bout to do a 428

[@NemanjaGuitar]

How long did it take you? Single day?

[@gaquino92]

Took me about 2 days to completely finish.