Installing a Whirlybird on a Trimdek Roof with Insulation: A Quick Guide
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- Buy from here: roys.au/reside...
This video demonstrates the installation of a whirlybird roof ventilator on a trimdek metal roof.
Required Tools:
- Marker
- Impact Driver (tek gun) & teks
- Left and right tin snips
- A Level
- Roof and Gutter Silicone
Steps:
1. Place the whirlybird so that it overlaps the ridge cap.
2. Use the whirlybird base as a template and mark a circle.
3. Make a hole and circle using snips.
4. Remove any teks from the ridge cap.
5. Place the whirlybird base under the ridge cap.
6. Bend the sides over the sheeting ribs.
7. Tek the whirlybird base into place.
8. Cut and bend the whirlybird base in accordance to the sheeting profile.
9. Use silicone to prevent leaks (note can also install underneath the whirlybird base for extra leak prevention)
10. Place the whirlybird tube onto the base
11. Level the whirlybird and place teks to ensure it does not move.
12. Install the top whirlybird.
--
DISCLAIMER: always wear gloves and other PPE (personal protective equipment), the person in the video has a lot of experience.
A whirlybird ventilator exhausts heat from a shed without using electricity. For large sheds, a second ventilator may be required to properly exhaust the head.
Reduce temperature in shed
- No electricity required
- Quiet
- Colours to match your shed
- Removes the hot air trapped in the roof of the shed
- Reduces the condensation and dampness of the shed
See: royssheds.com....
--
If you like these types of videos and would like to see more of them, please like/subscribe and let us know what you would like to see :)
Please let us know if you have any questions or if you have any recommendations.
--
Perth Wide Custom Steel Shed Suppliers and Builders
Website: royssheds.com.au/
Phone: 08 6230 2250
Online Quote: royssheds.com....
#roof #vent #sheds #installs #diy #whirlybird
Buy from here: roys.au/residential-whirlybird-300mm-throat-sky-axis-wind-turbine/
Best installation video I've seen. Good job guys. Thanks
1:21 I'm curious why not also apply sealant before installing the whirlybird? Would that be more robust? I'm in a Do It Myself home repair: assess and repair water damage and install under eve intakes and an exhaust.
Nice
Where can I purchase this vent and especially its square sheet metal base? Most I see come in that odd octagonal shape. The square one made fitment on the roof ribs much better! Thank you
Did you find where to purchase this at? I’ve been looking myself.
Bunnings have them.
Hi mate, can you have one of those fitted if you are in a BAL zone? Or are they rated to prevent embers? thanks very much and appreciate your awesome videos!
Hi, thanks appecaited :) You would need to install an ember guard, see: whirlybirdemberguard.com.au
@@RoysSheds Awesome thanks so much for that, brilliant! have a good one and keep up with the amazing content!
@@BADQ No worries, thanks will do 👍👍
I cant find the turbine vents with the square base either.
Did you find a place to order from?
Here you go: roys.au/residential-whirlybird-300mm-throat-sky-axis-wind-turbine/
@@jordanherrin4525 roys.au/residential-whirlybird-300mm-throat-sky-axis-wind-turbine/
what size did you use?