Wanted to thank you all for this video. I got back into the hobby after 15 years and the industry has changed 10 fold. Brushed motorswere the go to back then and you needed armatures and a lathe. Now brushed motors are pretty much non-existent in the hobby. This video helped me understand the ins and outs of brushless motors and what tools can help me be effective at getting the more efficiencies out of them.
Gearing and timing is also important to kindof match… like, you could lower gearing, and get some bottom end gains, by gear, then timing up, and reduce torque, to somewhere back to the “same” amount, and end up having higher rpm, enough to actually have more top end.
Cool I use to set up brushed motor back in the day with brushes and springs and cutting the com. I finally figured out brushless motors from tuning and analyzing it and playing with gears and heat temp
Hi, great thanks for the helpful video. I have 2 further questions. What is best method to clean my brushless motor as I feel it must been important from running on filthy outdoor race track (on road and offroad dirt). I have 1 motor on my analyser which has a 37 b 42 c42should I replace sensor board immediately if didn't as still runs well what would happen. Many thanks
Great video as always! Want a tech tip, non RC related?? Invest in some shock mounts for your microphones it'll get rid of that annoying sound of the mic picking up the vibration every time you hit, or set something down on the table.
🎉if I choose non blinky 17.5 class or mod class and want to add lots of Boost and turbo what's the rule of thumb for setting up initial mechnnal timing please
Well guys good show lot of great info on how not to burn up your motor. But the fastest most expensive motor doesn’t put a bad driver in first dose it ?
I m gonna teach you how to build a super fast drag car (Disclaimer) I've never built one so Please R1 wurks ,Maclan etc if I'm wrong just correct me Lol 😆 that was good I must admit 🤟🏼
Video would have been great with fewer interuptions. Every time hes trying to explain hes interupted with lame jokes or questions that may have been answered without the interuption.
![[LIVE] : ONE ลุมพินี 91 | คู่เอก "คมอาวุธ vs อเล็กเซย์"](http://i.ytimg.com/vi/V0RkEfYFsgM/mqdefault.jpg)
Wanted to thank you all for this video. I got back into the hobby after 15 years and the industry has changed 10 fold. Brushed motorswere the go to back then and you needed armatures and a lathe. Now brushed motors are pretty much non-existent in the hobby. This video helped me understand the ins and outs of brushless motors and what tools can help me be effective at getting the more efficiencies out of them.
An absolute Golden discussion. Well done!
Tyler P, you nailed it man! No worries. Easily understood. Great show, you guys had me laughing.
Gearing and timing is also important to kindof match… like, you could lower gearing, and get some bottom end gains, by gear, then timing up, and reduce torque, to somewhere back to the “same” amount, and end up having higher rpm, enough to actually have more top end.
Cool I use to set up brushed motor back in the day with brushes and springs and cutting the com. I finally figured out brushless motors from tuning and analyzing it and playing with gears and heat temp
Very well done and informative. Thanks
got told down at the track im running my engine to hot HW 6.5T with 24 degrees of boost and 24 of turbo.
car went like a rocket down the straight 🚀🤣
Props to free agents!
Thank for the video it help me to understand timing on a rc
Hi, great thanks for the helpful video. I have 2 further questions. What is best method to clean my brushless motor as I feel it must been important from running on filthy outdoor race track (on road and offroad dirt). I have 1 motor on my analyser which has a 37 b 42 c42should I replace sensor board immediately if didn't as still runs well what would happen. Many thanks
Great video as always!
Want a tech tip, non RC related?? Invest in some shock mounts for your microphones it'll get rid of that annoying sound of the mic picking up
the vibration every time you hit, or set something down on the table.
53:46 yea but which fantom and trinity?
🎉if I choose non blinky 17.5 class or mod class and want to add lots of Boost and turbo what's the rule of thumb for setting up initial mechnnal timing please
great video and awesome information
Where are you guys located
obviously if the gearing is too high the motor heats up, but if it is under geared will it overheat too ?
I found if the motor is overgeared the motor and esc will heat up. If the motor is undergeared just the motor will heat up.
I have 2 certified xfactors pretty sure they are fixed timing is it worth upgrading the rotor or is it not worth it
Xfactors all have adjustable timing. It’s just a bit different to adjust. They come with a good rotor
Great video. I have a question. if you have a motor that has adjustable timing on it do you have to use the sensor for it to work?
Great video! 👍
After having tuner your motor to the best timing, do you still Player around with the timing settings of the ESC?
Rc madness, does 45 degrees in the esc with 0 in the motor dyno the same as 0 in the esc and 45 in the motor?
Tyler! what did you say you used for live-streaming? its some RTMP service right?
Streamlabs
Nailed it.
Well guys good show lot of great info on how not to burn up your motor. But the fastest most expensive motor doesn’t put a bad driver in first dose it ?
6amps is the max anything over that and the motor falls off from what Iv seen and experienced. I tune for 5 then gear from 5.5
so basically turbo timing in the ESC is vtech yo!
There 3 or 4 stage is in the remote
I m gonna teach you how to build a super fast drag car (Disclaimer) I've never built one so Please R1 wurks ,Maclan etc if I'm wrong just correct me Lol 😆 that was good I must admit 🤟🏼
Video would have been great with fewer interuptions. Every time hes trying to explain hes interupted with lame jokes or questions that may have been answered without the interuption.
The stock class is actually modified and "the modified class" is really the stock car, you just have to learn how to drive it.
r1 wurks the fastest motors i ever run and right behind was surpass...
Which surpass?