I put a lot of thought into trying to fix another way but, I came to the conclusion without a 3d printer or welder this is the way to go. So I did it a few days ago 30+ miles and still working perfectly. Thank you.
3:19 Discord! LOL! Awesome fix! Better yet, low cost fix. Yeah, if you are riding one of these, chances are you have a tube of that epoxy in your tool cabinet. Thank you!!!
This short how to style vids are awesome!!! love some more helpful ones maybe one about bogging when pulling back throttle idk your the man oh and about those two button big red kill switch looking things and where to get them would be the best
Damn, i binged watch your videos ever since i started building my yd100 project . And u got me so many tricks and solutions to my issues , so .. i have to say thanks you forposting this .
Been a mechanic for years and just ordered my first 2 strike bike build, was the zeda 80, if you have any tips for me I'd appreciate it I like the idea of working on something so small
Man where to start lol. over the years I have covered nearly everything a new builder will run into on the channel. But if you have any specific questions you can get live help in our discord server. discord.gg/98RMmym6
@@LAHover thank you I'll let you know if I run into something I can't find on your channel I'm hoping to have lots of fun working on something so different than what I'm used to
Good morning or afternoon or evening mr la hover good fabrication skills as I was looking a replacement clutch lever cause I could not get it to work with one hand but now you offer a worthy solution thanks ps I’m in sunny Antigua and Barbuda 🇦🇬 locked time you’re channel I’m Learning a lot of very useful tips😎😁
Great tutorial. Luckily the czech suppliers didn't get any of these defective levers yet so I guess I'm safe. But yeah. My yd is running good, not perfect, topping out at 52 km/h (32 mph) on the 4th tank or so. She drinks fuel quick though. I'm thinking about a Zeda 80 again but I'll have to buy G clips separate and that's not fun.
I like using this clutch lever for my throttle, and I use the existing notches for my cruise control. Also helps me from getting carried away and running to wide open for too long
Good idea...could make a little form and use 5 min epoxy too...can add whatever color you want to it if you are trying to match the bike's color scheme
Thank you for another informative video. Would you please let me know where or who I can order a aftermarket phantom 85 piston and bearing or bushing kit from. Thank you for the great videos.
Sometime soon I want to do something rather crazy but I want to get my old mountain bike shove one of those motors on it and cross america. What motor would you recommend it can be 4 or 2 stroke but I think the 2 stroke would fit better in the frame of my bike
@@Pyrite-nn5iz yes and the fact you can just go to any old petrol station/ gas station is useful I will need to have a think as I have hard 4 strokes can come loose really easy because of the engine mount
Hey man, I recently got the idea of buying a kit for my daily commute to and from work..the only problem is I have a Michelob Ultra bike that was given to me and I’m not too sure how it would hold up with anything more than my body weight. If you have some sort of social media to communicate or anything to the sorts, that would be great!
Mannnnn these things are GARBO. Thanks for the advice my man. I had a question-I have a Zeda 80 Firestorm Cranbrook build and was wondering if you know of any (if at all) suspension forks that will fit as a replacement for the stock one? I have everything on my motor and mount tightened down safely so that the vibration won’t terrorize my rig, but mannnnn do my cheeks need some relief from the lack of suspension on a cruiser build.
Your epoxy skills are unmatched in the motorized bicycle world. I salute you sir
Who needs a 3D printer when you have JB weld.
@@gasnxt6805 JB weld - the OG 3D printer
Insta fix in a tube :P
I put a lot of thought into trying to fix another way but, I came to the conclusion without a 3d printer or welder this is the way to go. So I did it a few days ago 30+ miles and still working perfectly. Thank you.
3:19 Discord! LOL! Awesome fix! Better yet, low cost fix. Yeah, if you are riding one of these, chances are you have a tube of that epoxy in your tool cabinet. Thank you!!!
That's brilliant! Except I've actually worn out the little locking post do there's not much left to grab onto, but I definitely want to try this out
Make a little epoxy post to replace it! 😂
This short how to style vids are awesome!!! love some more helpful ones maybe one about bogging when pulling back throttle idk your the man oh and about those two button big red kill switch looking things and where to get them would be the best
Thank you for the video and the MacGyver idea awesome very informative
im gonna have to do this thanks man,, trying to line that clutch thing up sucks,, much appreciated
Damn, i binged watch your videos ever since i started building my yd100 project . And u got me so many tricks and solutions to my issues , so .. i have to say thanks you forposting this
.
"How it's made" - featuring LA Hover 👍
Thanks for stopping by Alex!
Ya that clutch lock is foodstamp from factory. Good idea. Might have to look into it now. Good video
Been a mechanic for years and just ordered my first 2 strike bike build, was the zeda 80, if you have any tips for me I'd appreciate it
I like the idea of working on something so small
Man where to start lol. over the years I have covered nearly everything a new builder will run into on the channel.
But if you have any specific questions you can get live help in our discord server.
discord.gg/98RMmym6
@@LAHover thank you I'll let you know if I run into something I can't find on your channel I'm hoping to have lots of fun working on something so different than what I'm used to
Good morning or afternoon or evening mr la hover good fabrication skills as I was looking a replacement clutch lever cause I could not get it to work with one hand but now you offer a worthy solution thanks ps I’m in sunny Antigua and Barbuda 🇦🇬 locked time you’re channel I’m Learning a lot of very useful tips😎😁
Great tutorial. Luckily the czech suppliers didn't get any of these defective levers yet so I guess I'm safe. But yeah. My yd is running good, not perfect, topping out at 52 km/h (32 mph) on the 4th tank or so. She drinks fuel quick though. I'm thinking about a Zeda 80 again but I'll have to buy G clips separate and that's not fun.
We sure got these in Australia.
Great fix!
Nice! Great fix!
Thanks!
@@LAHover yep!
I love you. I always have problems with a dragging clutch. I will try this out.
I like using this clutch lever for my throttle, and I use the existing notches for my cruise control.
Also helps me from getting carried away and running to wide open for too long
Good idea...could make a little form and use 5 min epoxy too...can add whatever color you want to it if you are trying to match the bike's color scheme
Good call!
Thank you for another informative video. Would you please let me know where or who I can order a aftermarket phantom 85 piston and bearing or bushing kit from. Thank you for the great videos.
Sorry that is one thing I have not looked into. I'm sure someone has a video about it.
@@LAHover thank you
Thank you so much I know how to fix the problem
Awsome was thinking of ways of fixing that and you just saved me from that process. 😀 simple yet effective. This is exactly why I use youtube.
You should invest in an inspection camera, they’re helpful since you can see inside the engine without removing the head.
L A, what's the name of the silencer you have on the end of your muffler? I need the exact name because I am having a problem getting it...
BADASS SHARKS 22mm
www.amazon.com/gp/product/B01N3ONOY9/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1
I recently got an 80cc conversion kit for my bike and I can’t help but wonder, what is the extra white wire for?
A 6v incandescent headlight. Cap or cut it off.
I love your vids
I just bend the finger tab so that it bottoms out at the correct position.
I'm glad I'm not the only one with common sense 🤣
Anyway to make the stock push down pin better???
Sometime soon I want to do something rather crazy but I want to get my old mountain bike shove one of those motors on it and cross america. What motor would you recommend it can be 4 or 2 stroke but I think the 2 stroke would fit better in the frame of my bike
Probably oably a four stroke because it might be more reliable
@@Pyrite-nn5iz yes and the fact you can just go to any old petrol station/ gas station is useful I will need to have a think as I have hard 4 strokes can come loose really easy because of the engine mount
@@dustinh4175yes that is what I was thinking as well 😅
@Maddmax Motorsports yes definitely even though if you are carful with a china motor it can last
@Maddmax Motorsports yeah I will see what happens really
Today I was riding and my clutch pin just popped out I have no idea what to look for or buy. The part in the handle I can't clutch now
Wonder what gave you the idea to make this video? Lol Happy Trails!
Kept looking at the dang thing thinking "This has to be easy to fix"... lol
Nice tutorial!
i wish somebody had the info i need of what problems im haveing do you have a way i can get in contact with you sir
Hey man, I recently got the idea of buying a kit for my daily commute to and from work..the only problem is I have a Michelob Ultra bike that was given to me and I’m not too sure how it would hold up with anything more than my body weight. If you have some sort of social media to communicate or anything to the sorts, that would be great!
Not a bike I'm familiar with. But you can find live help on our discord server, allot of builders with good information in here. discord.gg/98RMmym6
Nice! Will do that to mine. Thank you!
Mannnnn these things are GARBO. Thanks for the advice my man. I had a question-I have a Zeda 80 Firestorm Cranbrook build and was wondering if you know of any (if at all) suspension forks that will fit as a replacement for the stock one? I have everything on my motor and mount tightened down safely so that the vibration won’t terrorize my rig, but mannnnn do my cheeks need some relief from the lack of suspension on a cruiser build.
You will need " 1 inch threaded forks "
New options that I trust are extremely limited. but they can be found all over ebay.
@@LAHover thanks for the reply my man.
What's going on with the bad 110cc kit rn.
waiting for a crank replacement.
thank you for that tip .
Крутой байк!
I was never in favor of the lever lock clutch, for the same reason that you have It seems like all the new kits are including them.
Your fix is simple.
The original one were nice, but yeah they kind of all seem to suck these days...
I JUST ORDERED THIS BEFORE SEEING THIS VIDEO LMAO WHAT
They are not all junk, just most of them.
cool sticker bUD
Great video. But im a little lazy. Maybe someone can fabricate one out of metal and sell it for $25. Im a buyer asap :)
Lol thanks. Funny thing is, that's all they were when they made em right.