Double Motor Melt Down - Trash To Treasure - Huge Copper/Aluminium Bars - ASMR Metal Melting
ฝัง
- เผยแพร่เมื่อ 25 ก.ย. 2024
- Another week and it doesn't look like the Corona is letting up any time soon so why not take sometime to tune out for today's double motor meltdown. I absolutely love these motor melts especially the ones with an Aluminium casing instead of the usual Cast Iron. Now guys if you want to buy a forge or a devil’s furnace, be sure to email me at bigstackddddd@mail.com to get a personal link to a 5% discount on Devil-Forges eBay And If you like the rings that I wear in this video, be sure to check this link below.
********************************************************************
RING WEB SITE
gthic.com/?aff=27
Want 20% off then Use the code Dion20
********************************************************************
I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online name.
D Heighway
PO Box 7192
Eaton, WA 6232
Australia
******************DISCLAIMER*********************************** DO NOT TRY THIS AT HOME
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
********************************************************************
********************************************************************
My other 240+ videos
/ bigstackd
********************************************************************
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
• Forging Crucible Tongs...
Follow me on Facebook
/ bigstackd-casting-2935...
Follow me on Instagram
www.instagram....
************************************************** ****************** Forge supplied by my friends in Devil-Forge. They sell a large selection of forges, ovens, burners and even the most incredible 5-burner ironworking furnace on the Internet.
DEVIL FORCE MAIN PAGE
devil-forge.com
EBay Store
www.ebay.com.a...
************************************************** ******************
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it👌🏻😁.
****************************************************
STEEL FOR MY FRIEND
I keep all my steel and cast iron pieces and I give them to my friend and once he gets about a tonne from me and his own collecting he takes that to the scrapyard and sells it then he buys some beer and comes over to my house and we make a night of it.
No My friend doesn’t have a TH-cam channel he just scraps metal in his spare time.
****************************************************
#bigstackDCasting
#TrashToTreasure
#BigstackD
Double Mini Motor Meltdown - Trash To Treasure - Copper/Aluminium - ASMR Metal Melting
Hey guys welcome back to another weekly episode where I make something into something else, I hope you’ve had a happy safe week as the crazy Corona is still on top of us all stay home stay safe and best of all have a great weekend. Now if you like the ring I wear or the furnace I use and would like one or more for yourself email me or check the link in the description where you can get 20% off the rings and 5% off a new furnace. 😁👌🏻
why you cant melt steel??
Lucky you didn't get visited by police down near Luna Park, given the current state of the world.
Corona
bigstackD Casting you should cast a big giant “BigStack” Nordic gold bar
is your plan to break those shelves?
Let’s be honest.
Ingot is the real treasure here.
Ingot is Super Pug.
Awwww.
Ingot we trust
@@rossbrumby1957 That's a good one Mate
True
Totally lovin the new special effects, and that new furnace definitely has a bit of bling. Stay safe and healthy.
I don't know what is wrong with the ppl that dislike your video's. I cant stop watching them; like everyone I have seen
Hello. Everything is locked down here. So l visit a friends metal scrap yard. His familly have owned it forever. They let me come in just before they leave. That way no one is around. I spend mon wed and sat nights taking apart all the motors, fuse boxed. By morning you sure can get a lot of copper, brass and aluminum. Now next week will be busy melting. Its a great pleasure melting.
energy needed for that will probably cost more....
Recycling*
@@supportmas4606 if they use gas for the forge, then the electricity bill will be more merciful on their souls.
I like your recurring elements: the picking of the items to melt, the high speed disassemblies, the lighting of the furnace, Ingot, the melting of the ice, the polishing. I even like what is not there: spoken dialogue. It is an artful, yet folksy, presentation. Thanks!
I'm worried that shelf is going to collapse on poor little ingot.
I worry about that on EVERY VIDEO!
Oh no
Judging from all the tools I’m sure he has the right amount of supports for the shelf consider he does have a “target goal” for how much metal he wants
Tyrinath dog or metal
@@Gruffsaid2u God gave dogs supersonic hearing so that they can hear shelves creaking before humans,he also gave them four legs instead of two so that they can move twice as fast as humans,if that shelf starts creaking little ingot will be on his toes and out of the door so fast that you will only see a blur,it's bigstackD you should be worried about😂
10:10 - The satisfaction of that pour and the elastic surface tension of the metal was nice!
Really is a Good Friday when BigStackD does a double motor melt.
That a fucking Really Good Friday... JC approves... Unless he's making nails out of it... Just say'n....
Fuck yes
Yes it is a good friday
2 months later..I'm watching on Friday and think I heard some horsepower..
I accidentally skipped 5 seconds.
Now I have to watch the whole video again......
twice.
Only 2 times?
Cant start a good friday without one of these
Yes, watching this is somehow satisfying and soothing...Cheers!
Redfilms Tv your right
I’d love to get notifications but someone has melted the bell...
Hhhhhhhhh
There is a cool guy on youtube that could cast another one....but he doesn't talk much
Bigstackd if you see this, you're my inspiration and reason I started casting!! Addicting hobby and now I am constantly looking for stuff to melt haha. Thanks and be safe in the current times!!
No worries Neil you be safe aswell my friend👊🏻😷👌🏻
Always amazes me to see how quickly the molten copper heats the graphite mold to a glowing red. I also love the 2 angles on the pour.
Thanks for the shoutout mate, those aluminium pours were epic!
I dont know why but watching that aluminum cool in the mold was strangely relaxing
Damn man I love all these videos so much, I'm legit addicted
Dukey ASMR ASF 😂
Agreed 😁👍
I have to say that I'm never going to get sick of watching that aluminum surface crystalize.
just got to work here in the US, coffee, homemade muffin and a bigstackD video!! thank gosh for Friday!
Keeping the motor tags as a historical reference. Liked the stroll along the shore and the views...and Ingot is the best
The Harley running was a nice touch!
Love this guy. Just gets too it, no bull, does the damn thing. Then sits back and cheers his country.. Good man
👊🏻😁🍻🍻
Up next: melting the Harbour bridge - treasure to trash.
Gaston The Dank 'Tiel which one?
Sushi The one and only Sydney Harbour Bridge ;)
trash to Treasure*
@@cobaltchromee7533 no he meant treasure to trash
@@The.Drunk-Koala I know, and I mean trash to Treasure
Honestly.. it’s super satisfying just watching you take the engine’s apart. The melt is an added bonus.
*Warlord amassing vast stock of treasure during outbreak, colorized circa 2020*
This is great content. I can't get enough of this. Something I've always wanted to try, but intimidated by it.
This is what I’ve been waiting all week for. now ingot has more treasure.
One of the aspects of your videos that I really appreciate is how you take something that has served its useful purpose and has expired due to its lack of ability to perform the way that it was originally designed to do so. Then you repurpose the discarded motors into something which is inherently unique and beautifully molded and sculpted into the shiny bars which adorn your shelf awaiting its next mission.
Looking forward to see that new rig in action too!!
I stay up till 4am once a week just for these videos
I think these are the most perfect casts i've seen on TH-cam
Getting kinda addicted to this channel during lockdown working my way backwards through all your videos
You think to save everything. I love it. Your videos are so full of content you keep us watching to the very end.
Hey how come we didn’t go there for a beer 🤣🍻. Sweet motor melt as always! Eventually I’ll melt the rest of mine when I stop being lazy. Great vid brotha 👍🏻
Love this channel! Entertaining and informative. It takes true talent to tell a story without saying a word. Thank you for sharing! 🤜🤛
I knew it would be here soon! It's 4am here in Ohio, US lol. Thanks for the upload D 🤘🤘
You are an artist. Great melt and beautiful ingots. Thank you Ingot for protecting the stack. Another great video. Thank you and be safe. Cheers 🍻
This guy was around in the dark ages he made swords for soldiers back then. What a legend
🤣 when you spin the fan and and engine noise came!!! Good stuff bro. Made my morning better
Now I know why I love fridays :D
I don't know why but this is so satisfying to watch.
I'm new to this channel and i must say, The little ingot makes everything perfect!
I love the motor and large equipment meltdowns. It's cool getting to see mechanical stuff taken apart.
When Im 40 in 20 years Ill finally have my own private land wit house
And this is exactly how I wanna spend the rest of my life. This is my hoarding dream. Recycle dismantle melt forge.
I know aluminum isn't one of the more expensive metals but for some reason I enjoy watching you work with aluminum more than any of the other metals.
Next upload: "today im making a giant 24k gold bar"
Where did you get the gold?
"Oh nowhere special but next im melting down an armored truck"
My fridays never really start before your videos...Cheers!
I was ashing my cigarette when the motorcycle noise stated, I looked up like "Wait...what am I looking at?" lol
Seriously Dude.. production values? EPIC.
Damn i love when that aluminum melts, makes me want to drink it
U good brody
Jacob Roman I also wanna drink tungsten-meltingly-hot aluminum
What a weird fetich man
If you drink melted aluminium in half hour your mouth have now cavity free teeths
It’s a lot of fun taking something apart not worrying about putting it back together
Hahaha...the engine sounds with the motor.
When are you doing a bottle shape?
Watching you pour molten metal and seeing it solidify is so satisfying
Yeah! Sam Towns!
Beautiful bars, 2 more motor tags up on the wall... a nice change of scenery (thanks for showing us outlanders a bit of your home turf 🍻💥) and of course, above all else, the most handsome little pupper down under.... along with his seal of approval. Also, over 800 now.. Getting there... getting there.... I love the look on the new forge and am eager to see it fire up. Much love to the StackFam from here in the SF Bay Area.
Be nice if we could get twice-weekly videos during the lockdown.
Also, a pity that I didn't know you were in my neck of the woods.
Love seeing the breakdown of these motors. So interesting seeing how they work.
I would love to see you make 1 massive aluminum ingot from all the slag.
The two bigger aluminum bars are just perfect! 🤩
Yes sir, the apocalyptic bank is becoming more of a reality everyday. Nothing like bartering with precious metals. Stay safe down under mate! ☠️💰☠️💰☠️
Love to see u digging for gold inside these old engines especially
The best part of the video is seeing ingot :)
Bigstack, your editing just gets better and better. Great vid, thanks!!
Cheers buddy, what a lot of people don’t realise for me to edit a 12 minute final video can take me over 12hours As I am compressing sometimes over four hours of footage to make the final video🤦🏻♂️.
@@bigstackD I can believe it. That's why I try to take a moment to say thanks to talented creators. But in addition to the technical work, I also think your artistic choices are getting REALLY good. One example of many: The motor breakdown sequence. It was the perfect blend of showing the full set of steps, yet you compressed the time to avoid losing viewer's interest, and had really fluid cuts as well. Masterful, really! Thanks again.
One video do a mega melt where u melt 4 engines including the steel
Always fun watching the motor melts.
Imagine how the motors feel when they enter your shop and see all those trophies on the wall 😱
A bit like predator with his Spines 👌🏻😁
BigstackD the original one with Arnold
?
@@dakotablaylock1116 probably from the second movie
Found this channel last night and I’ve binge watched for hours. Subscribed
just found your channel! great vids!
That new Furnace look really cool, cant wait to see it in action, Love these Motor Melt Downs.
Man, I’m just waitin on you reaching 1 ton
I never get tired of watching these videos!!! Great job
Damn that's loud
Sometimes watching this, we get so accustomed to the videos we forgot you could be doing all this with a Go-Pro on your forehead
So do you just walk up to motors and take them home to melt, even if it’s still being used?
He gets them from a scrapyard
Robert Simper I’m gonna throw you
Jesus calm down
why is this fun to watch idk but it do be 2:30am every time i watch these
STAY IN HOME EVERYONE!
We have fun here.
Hi BigstackD
I love your work. There's no Bull**** in your videos. They are educational, entertaining and inspirational. Keep making excellent videos. 👍👍
i came for the smelting, i stayed for the dog
This was the episode that started us off on your channel. Still one of my favourite melts :)
Hey bigstack when you meltin' the tiny one I sent you?
Great video and final result as always. Your videos are awesome for quarantine.
Not sure just yet matey but it is still on my bench so it definitely won’t be forgotten 👌🏻😁
I hope these are the types of videos the aliens find in the future. This is a cinematic and auditory experience.
5:28 YOU’RE DOING DUAL CAMERA POURS NOW!?!? Director of the year? Love the content. I could watch you melt shit all day.
Oh, and thanks for always speeding through disassembly and transitions. I like the slightly muted sounds of it, and that we get through it quickly. You’re just killin’ it, Bud. Cheers.
Edit: omg, I’ve been watching you forever and I wasn’t subbed!? I’ve righted this wrong. F’in TH-cam. They know I love your channel and keep giving it to me; but I wasn’t subbed. I apologize for my transgressions.
👊🏻😷👌🏻
oh man, u gotta turn the sound up, you missed out on the electric motor sounding like a hemi
I always find myself coming back to this video haha it's so soothing
What was the first thing you ever melted when starting your collection?
That shelf is gonna need an upgrade soon. Ingot seems pleased with your progress.
Repo Man 360 it’s impressive how strong the shelf actually is
Next: Melting the Burj Khalifa (Insane profit)
Guaranteed shelf collapse
Thats alot of work and im learning alot just by watching your videos. Thanks mate.
There seemed to be a lot more visible flames this time, was there just a lot more burnable degree with the copper?
Also that new furnace looks fantastic, can't wait to see it in action!
The extra flames in this video was due to the small amount of varnish that coats the copper that’s in the windings on the stator. It was just burning off a little bit of varnish that’s all👌🏻😁
@@bigstackD okay that's what I was thinking! Thanks pal
These vids make me want to start meltling and casting. Keep it up buddy. And I love that there is always a cheers to your nation & flag in every one!
Fifth viewer! And I’m in the US! Woot! Now I wanna find the jackass that gave it a thumbs down already. WHAT THE HELL?!?!?!
Thanks for the entertainment during this craziness. Keep up the excellent work.
Hi there :D
I love crocketts theme and I love watching your videos I don’t know why but I find watching you forge very soothing and relaxing used to fell the same way watching forged in fire 🔥
I walked over a local bridge the other day, is it bad that I looked at the barrier and wondered how much aluminum BigstackeD could get out of it?
I live in South Florida, about 30 miles north of Miami. I’ve known many people who were on Miami Vice. Also filmed down here. Glad you like my little corner of the world
I onow how much you love stripping wires lol so you should try the wiring harness from a car i heard you can a mountain from a big SUV or truck
I like to watch you while you dismantle motors !!! Very cool!
1st
4707:th :D
Cheers To your friend scrapping, that fish paid my bills for a while and will always be a part of where my fun money comes from
Keep up the good content,big stack.
Love from Arizona. Stay safe from COVID-19.
I can't get enough of your videos mate! Keep up the great work. Cheers!