For those viewer which may question about why such thing is done when tractor already comes with enough solid axle. Actually such tractor is used as dozer. The bucket and hydraulic cylinders installation connected with "tendem pump". The previous axle could break while the bucket filled with sand could weight upto 1500kg max. The 80+ hp engine is enough capable to handle such big hydraulic jeck. Counter weight, a mobil oil drum "build with heavy metal" for extra cylinders installed at back of the tractor that will keep it stable too. The brand new dozer cost around $120k-150k. Hence the bucket extension cost $10k-12k including complete installation. Its used for load - unload of sand, mud, gravel or stuff used in construction of roads, buildings etc.
Yes because the tractor corporations that invest millions of dollars in design and manufacture of tractors don't know as much as some shop with a dirt floor somewhere
Did you guys calculated the new radius of front tires compared to old ones? If not, now the back tires needs to be replaced. Did you put full velds on new front axle? What type of material is it? What type of electrode is it? When you finished welding did you stres test the new axle and did you quench it? Do you guarantiee for your work in some sort of manner?.....
@@bobg3034 newer mind,it needs too be caltulated,factory puts one combo and when you put another set on front bigger or smaler its allways the problem for steering,it cracks,breaks,bends,etc. Been there,seen that many times....
Calculus? Full welds? Type of material? Type of electrode? Stress test? Some guarantee? Dude, they’re Indians, the use whatever they have. No matter if broke after 2 hours, they don’t care… there’s no safety at all, neither the minimum for the workers. Try to look some videos of Indians using tractors. They don’t care if it’s wrong or not, or getting injured or die…
Most of the time it's not the axle that is the issue. It's mainly the hubs that breake down. If I look at my MF industrial the center of the tire is richt above the center of the hub. Here the center of the tire is on the outside of the hub. Why??
Massey ferguson parts are always stronger then those old welded scrap iron things I don't even know if they have done a heat treatment for hardening the axle I have a messey 284 💪💪
Ahhh yeah, the value of that tractor just went down. There was nothing wrong with the original front adjustable axle. Obviously they’re not farming row crops.
Yea I didn't see the logic either, but in a different video it's for putting a massively long front loader on, don't know why so long, but yea the massey front axle wouldn't take it.
So the new front axle supposedly will hold three times the weight of the factory unit. It is still anchored to the tractor frame that was designed to support only the weight of the original front axle.
wszystko ladnie podziwiam z jaka dokladnoscia jest to robione , ale jedno mnie smuci , dlaczego wszystkie sruby , zakrecane na sucho , czy nie stac was na odrobine smaru ,
вопреки всем законам построения рулевого управления собрали балку с неправильным углом поперечного наклона шкворня.говорить что дальше о квалификации этих слесарей-конструкторов бессмысленно.
Il n'y a même plus de carossage sur les roues avant et même pas de bagues en bronze pour les pivots de direction un vrai travail de merde c'est pire qu'un essieu de d22 le truc
lets see how long it last :) Not a nice finish, let alone Not being welded internally. ruff as guts to be honest. Though it may serve the purpose for a while.
Jesus is the only way to healing, restoration and salvation to all souls. Please turn to him and he will change your life, depression into delight, soul heading from hell to heaven all because of what he did on the cross “Whoever calls upon the name of the Lord shall be saved” Romans 10:13
Why don't they bevel some of the high stress points before they weld them together rather than just butt welding them together .The joints would be much stronger ...
That feeling of sand in your eyes is using poor quality welding helmets weld Flashes add up in a day Hot metal dropping on sandles hey look pinjab is dancing again tzzz foot in water
WOW no gloves, no real eye protection, no safe shoes, precision fabrication equipment like that press brake and that 'level' and that ever present hammer, precision cutting equipment, that tractor will last ???? of weeks with no wheel bearings, and they look so happy and look forward to their daily bowl of rice every day, and then do it all over again for life ?????
ช่างทำเก่งมากครับ
Is this some kind of challenge for Indian people? Who can overload a vehicle the most?
This guy was using a Table! So happy for him. I was starting to think they weren't available over there or something.
Ñ
th-cam.com/users/shortsIWKoajT1yM0?feature=share
Finally someone with his safety in mind, at least for himself; safety glasses and boots no sandals.
ماشاء الله اعمال متقنة
Masha Allah Bhai Jann ❤️❤️❤️
Perfect show.
For those viewer which may question about why such thing is done when tractor already comes with enough solid axle. Actually such tractor is used as dozer. The bucket and hydraulic cylinders installation connected with "tendem pump". The previous axle could break while the bucket filled with sand could weight upto 1500kg max. The 80+ hp engine is enough capable to handle such big hydraulic jeck. Counter weight, a mobil oil drum "build with heavy metal" for extra cylinders installed at back of the tractor that will keep it stable too. The brand new dozer cost around $120k-150k. Hence the bucket extension cost $10k-12k including complete installation. Its used for load - unload of sand, mud, gravel or stuff used in construction of roads, buildings etc.
Главная фишка гнутым электродом варить!!! Иначе не будет необходимой прочности 😉
Beatiful 👍🏻💯💯
"""" j'admire la qualité et la précision du travail Suisse""""
Nemogu da verujem svaka vam Čast majstorija 👍
Yes because the tractor corporations that invest millions of dollars in design and manufacture of tractors don't know as much as some shop with a dirt floor somewhere
Lindo trabalho!
clever skilled guys!
❤🥂
Great job guys! 👍
I love these guys out of 12th century.
😂👏🙏
:) :))
90% of the world is still waiting for their Time Machines
We had a 2705 Massey with a loader, those adjustable pieces would snap in some cases. Never did we change adjustment on them, learned the hard way!
Very nice job you guys are very talented 👍
alvin and the chipmonks always in these vids🤣
Wow, .... a table, have you seen : a TABLE !
❤🥂
Стол это роскошь 😮
The guy that did the torch cutting had boots on. Guess he don’t want molted steel to damage his flip flops
Did you guys calculated the new radius of front tires compared to old ones? If not, now the back tires needs to be replaced. Did you put full velds on new front axle? What type of material is it? What type of electrode is it? When you finished welding did you stres test the new axle and did you quench it? Do you guarantiee for your work in some sort of manner?.....
Tractor was only rear wheel drive.
@@bobg3034 newer mind,it needs too be caltulated,factory puts one combo and when you put another set on front bigger or smaler its allways the problem for steering,it cracks,breaks,bends,etc. Been there,seen that many times....
@@radisadjuricic9823 Ok I see what you meant.
Calculus? Full welds? Type of material? Type of electrode? Stress test? Some guarantee? Dude, they’re Indians, the use whatever they have. No matter if broke after 2 hours, they don’t care… there’s no safety at all, neither the minimum for the workers. Try to look some videos of Indians using tractors. They don’t care if it’s wrong or not, or getting injured or die…
It’s the 3rd world man. People literally get run over by cars and no one gives a shit. Everything you mentioned is a 1st world problem…
Wonder why he changed axels, the original one was much more adjustable.
Будут делать переднюю навеску, погрузчик.
Maybe he wanted to lower the front end
It's just for demo for Promoting own product...
Theres another video _ they fitted the tractor with a monstrosity of a homemade loader
Why the sky is blue
Now add its performance also
That is a hell of better front axel than what they took out.
Maşallah
Das sind die Facharbeiter, die in Deutschland dringend gesucht werden !
10.08.´23
Most of the time it's not the axle that is the issue. It's mainly the hubs that breake down. If I look at my MF industrial the center of the tire is richt above the center of the hub. Here the center of the tire is on the outside of the hub. Why??
Cannot see any difference in fact the original looks stronger
Massey ferguson parts are always stronger then those old welded scrap iron things I don't even know if they have done a heat treatment for hardening the axle I have a messey 284 💪💪
0
this is like western kids... but with tractors instead of mustangs
precision engineering
Thank you very much.
👍🥂
Ahhh yeah, the value of that tractor just went down. There was nothing wrong with the original front adjustable axle. Obviously they’re not farming row crops.
Yea I didn't see the logic either, but in a different video it's for putting a massively long front loader on, don't know why so long, but yea the massey front axle wouldn't take it.
It is designed for Wheelies.
They put a long crane like loader on the front to lift heavy steel pieces for manufacturing..
❤❤❤❤❤❤
I used to put graphite grease on anything I assembled.
No painting before assembling?
I’m jealous they have plate steel. I can’t afford any. A 4’ by 8’ of 1/4 a36 is a whopping $2500 USD.
I'm not convinced Abom79 would approve of beating the hell out of stuff with a builder's lump hammer to assemble it all.
These are professionals
ما شاء الله
The fact at 11:18 hes wearing a davenport CT shirt 😅
Я думал в полный привод переделаете
So the new front axle supposedly will hold three times the weight of the factory unit. It is still anchored to the tractor frame that was designed to support only the weight of the original front axle.
Don't you lot paint and rust protect anything you make? A thumbs down from me.
🤣🤣 Frankenstein engineering
Tem que mostrar o trator andando para ver o resultado
wszystko ladnie podziwiam z jaka dokladnoscia jest to robione , ale jedno mnie smuci , dlaczego wszystkie sruby , zakrecane na sucho , czy nie stac was na odrobine smaru ,
What is the top speed? 🚜
40kmh
👍
вопреки всем законам построения рулевого управления собрали балку с неправильным углом поперечного наклона шкворня.говорить что дальше о квалификации этих слесарей-конструкторов бессмысленно.
Il n'y a même plus de carossage sur les roues avant et même pas de bagues en bronze pour les pivots de direction un vrai travail de merde c'est pire qu'un essieu de d22 le truc
A tractor axle geometry is different ro a truck
@@nickcoppard5335 принцыпы движения колесапри повороте,его стабилизация-одинаковы на любой технике.
у нас бы в колхозе заварили бы наглухо и всё
now go out and see how long it takes to break. then come back for more welding.
Why not just get a machine that does what you need instead of overloading this one? Or does that make too much sense?
How on earth do they mass produse this ithem? is the demand so high?
Creo que no protegieron con ANTIOXIDO y pintura la parte que fabricaron, eso acortara la vida de esa parte.
Saludos
Похоже, что они заново восстановили передний мост.
Hay
Today on 7018's and lidocaine dreams...........
lets see how long it last :) Not a nice finish, let alone Not being welded internally. ruff as guts to be honest. Though it may serve the purpose for a while.
Jesus is the only way to healing, restoration and salvation to all souls. Please turn to him and he will change your life, depression into delight, soul heading from hell to heaven all because of what he did on the cross
“Whoever calls upon the name of the Lord shall be saved” Romans 10:13
Why don't they bevel some of the high stress points before they weld them together rather than just butt welding them together .The joints would be much stronger ...
When your in the "Tickey Tac" business it doesn't make sense to make sense.
Never make anything stronger than it needs to be. Enough is perfect. It will last a lifetime.
Em I dream or hi use work bench
i hope they dont spot weld everything and do it propaly
❤😂🎉
God
no grease in any bushes....no split pins on the nuts....no paint on the new axle.....what was wrong with the original axle?.......
No grease points whatsoever.
They are there but will be missed in the video
Your observation was good 👍🥂
That feeling of sand in your eyes is using poor quality welding helmets weld Flashes add up in a day
Hot metal dropping on sandles hey look pinjab is dancing again tzzz foot in water
Apna num send krain
Absolute stupid modifications increasing 3x more pressure on a proven Design 🤬 Obviously need a bigger Tractor or loading handler 🙈
They sure knows the job !!!!!!🔴🤫🫢and that it is priceless!!!!🔴🤫🫢
Thank you
WOW no gloves, no real eye protection, no safe shoes, precision fabrication equipment like that press brake and that 'level' and that ever present hammer, precision cutting equipment, that tractor will last ???? of weeks with no wheel bearings, and they look so happy and look forward to their daily bowl of rice every day, and then do it all over again for life ?????
просто ужас