I worked at a pallet meal in Alabama,one guy fed the notcher I stacked them on the other end.We also had a pallet machine along manual builders they were fast
i have 15 years experiance in pallet making.. i run a pallet manufacturing department in the uk you are doing very good concidering its hourly pay.if you got payed for each pallet you made then you would improve on speed a lot more. keep the good work up !!
I work in a facility identical to that one, except people just wear whatever because it stays about 90 degrees minimum inside. Definitely hard work, but I enjoy it.
+Peaceful Hooligan yeah IKR ! ! We Do Both At the shop i work At We reclaim pallet's aswell and reuse the Stringer's/runner's And Also the slat's/deck-boards it suck's ass having to shoot around all Those nail-heads and still be accurate and fast Aswell But These Guy's Are not all that quick like At All :)
With all of our current automation technology, like on 'How It's Made', why are jobs like this still requiring manual labour to manufacture a wooden pallet?
I'm a carpenter and had thousands of dollars worth of tools stolen. Went to work at a lumber mill/pallet factory for a while until i bought more tools. This is nothing. It sounds like machine gun fire when we built pallets. Tap Tap Tap..TATATTATTATATATATTATATa. Seeing someone really fast with a coil nailer is pretty impressive. I was surprised at how fast you can go and I've been using nail guns for 15 years. Tip: remove the springs.
You can legit make them sound like machine guns if you know how to do it. I do it all the time on the wide boards that need 3 nails instead of 2 lol. Love that trick Guaranteed to turn some heads lol
@@sherpaderpdingo3405 got a die setter job instead, that other job was part time. Still wonder if it would make some good money though. They just relisted it
I’ve worked in a pallet factory and there are machines doing this work but they aren’t always as productive as two experienced and well coordinated people, plus they still need at least one operator and ongoing maintenance. Problem is finding people fit enough to do this 8 - 12 hours a day for relatively low pay.
+sdc0llin You Are correct Sir most Builder's Do prefer To use a Nailer without the Safety Spring on The nose But I For One prefer to Keep My spring Installed I Like The feel Of the Gun better With A Spring I Do Modify The Spring Tho Where I Can Get The hair Trigger Benefit's And it Still Has The feel That I like And If you Are not Careful And Know Your Nailgun Well Shooting Without A Spring Can cause You to Put To Many Nail's In one Isolated spot Instead of uniform Nail spacing You Get Like Three Or Four nail's Like All bunched up in A Row On The Corner Of Your Lead-Board Happens To Amateurs mostly lol
I worked at Peco Pallets. The guys repaired the ones that needed it. Then they got painted. Repair guys made $15 base. With production incentives they could make up to $22 an hour. I was happy making $16 to load trucks. Pallets weighed 62 pounds apiece. Guys had back problems Shoulders rotator cuff etc.
Don't know where you live but 15 an hour is not enough for that type of work where I live 22 sound more like it though If you were getting payed 16 loading them with a forklift that not that bad
@@piochin23 actually it's not a stupid question I used to build ( now repairing) pallets and certain pallets can't go on the ground like pallets that r used for food so instead of taking a stack and putting it on the ground and then grab the stack thats on a pallet it's just faster to grab the stack and load it so yes some pallets can be shipped with a pallet on the bottom it just ur pallet company u work for they r just to cheap to give 24 free pallets away
@@baheerathan8307 38 hrs for 636 after tax per week? that is too cheap...i worked in A & L Windows and similar job get 24.33 per hrs before tax. nearly 800 dollars per 38 hrs per week. maybe you should consider that?
Guns are not for production. No where near as fast or as good at making pallets. These pallets are made with substandard nails. Wire is .083 or .099 not machine grade .115 or .120 in diameter. Gun nails have poor threads or rings so they are easier to drive. Holding power is next to nothing and the steel in the nails is lower grade allowing them to bend easier and make shiners. And the clincher (no pun) is that these nails cost twice that of loose nails. That alone will pay for a real nailing machine.
+Bonnie Lee Williams LOL so you guy's Call it Pallet making? like for real ?? LMAO ! ! ! Around Here We Call it pallet building And the guy's Who operate the Hand nailer's/nailguns..... Me Are Called Builder's So Are y'all Called maker's ? Or Pallet Maker's ? Just Curious pallet makers Sound's kinda yankee To Me
good work fellaz, been dooin pallets over 20 yrs👌👍
How much you be making ?
@@EternalLifeRemnant lol not enough buddy, that's not a career unless you actually own your own business and got good connects.
That’s sad
@@EternalLifeRemnant Just started doing this last week it's $16 an hour decent work enough to keep the bills at bay
@@ZachAttackO0is it hard to learn I’m starting soon
I would love hard workers like that💪🏽💯😊, awesome team !!
I worked at a pallet meal in Alabama,one guy fed the notcher I stacked them on the other end.We also had a pallet machine along manual builders they were fast
i have 15 years experiance in pallet making.. i run a pallet manufacturing department in the uk you are doing very good concidering its hourly pay.if you got payed for each pallet you made then you would improve on speed a lot more. keep the good work up !!
yes brother thank you
Damien Williams Williams hi where in the uk are you and any jobs going I have experience working with pallets
Damien Williams Williams where in the uk are you based and any jobs going?I have experience working with pallets
we are pallet machine manufacturer
Bonnie Lee Williams thank you for your advice 😊😊
I built pallets like that before that's good team work
Would you say this technique is quicker then just doing 1 pallet at a time?
how many pallets this guys do an hr? looks fast!
Professional..enjoyed watching this.
I work in a facility identical to that one, except people just wear whatever because it stays about 90 degrees minimum inside. Definitely hard work, but I enjoy it.
I won first place in the pallet built championship. 45 pallets a hour 80 counts and 60 counts this right here are 48x40 white
What type of wood do you guys use and nail size
I’m trying to prevent the slats from splitting on the edges
+Peaceful Hooligan yeah IKR ! ! We Do Both At the shop i work At We reclaim pallet's aswell and reuse the Stringer's/runner's And Also the slat's/deck-boards it suck's ass having to shoot around all Those nail-heads and still be accurate and fast Aswell But These Guy's Are not all that quick like At All :)
Bobby Singer we do end of the day we made this pallet 15 pallet 12 mints
You gotta learn the slide bro don't pick the gun up slide it across baby ohhhh yeahhhh
With all of our current automation technology, like on 'How It's Made', why are jobs like this still requiring manual labour to manufacture a wooden pallet?
Property to create jobs or because a pallet machine is expensive
you have a couple million dollars to spare for machinery lol
Pallets are built by mechine....these hand tables guys build Pallets that the nailing mechine can't build like custom sizes or orders that are small.
@@stevenbrown3783 yes, a nailing mechine used is about 150 to 200k. My plant has 3
If you automate everything, then the only people who have jobs are the robot's supervisors.
Just got offered a job doing this looks fun
I'm a carpenter and had thousands of dollars worth of tools stolen. Went to work at a lumber mill/pallet factory for a while until i bought more tools. This is nothing. It sounds like machine gun fire when we built pallets. Tap Tap Tap..TATATTATTATATATATTATATa. Seeing someone really fast with a coil nailer is pretty impressive. I was surprised at how fast you can go and I've been using nail guns for 15 years. Tip: remove the springs.
thank you for your tips sdcollin
I'm still this work jest 1 year pallets maker we can now more fast making pallet😊
You can legit make them sound like machine guns if you know how to do it.
I do it all the time on the wide boards that need 3 nails instead of 2 lol.
Love that trick
Guaranteed to turn some heads lol
N I’m over here bussin them open 😂🤣
Love the team work
landfound thank you
Just applied at menards. They pay 40c a pallet made on top of hourly! Seems like it could make some crazy money
Howd it go there?
@@sherpaderpdingo3405 got a die setter job instead, that other job was part time. Still wonder if it would make some good money though. They just relisted it
I am surprised this isn't made by machine. But than again, these people are kinda working like machines so...
I’ve worked in a pallet factory and there are machines doing this work but they aren’t always as productive as two experienced and well coordinated people, plus they still need at least one operator and ongoing maintenance. Problem is finding people fit enough to do this 8 - 12 hours a day for relatively low pay.
What is the name of the nail gun.
Thats probably a max cn70
+sdc0llin You Are correct Sir most Builder's Do prefer To use a Nailer without the Safety Spring on The nose But I For One prefer to Keep My spring Installed I Like The feel Of the Gun better With A Spring I Do Modify The Spring Tho Where I Can Get The hair Trigger Benefit's And it Still Has The feel That I like And If you Are not Careful And Know Your Nailgun Well Shooting Without A Spring Can cause You to Put To Many Nail's In one Isolated spot Instead of uniform Nail spacing You Get Like Three Or Four nail's Like All bunched up in A Row On The Corner Of Your Lead-Board Happens To Amateurs mostly lol
Bobby Singer we do some time not all the time
Wow super cepat perakitanta
How much per hour
I worked at Peco Pallets.
The guys repaired the ones that needed it. Then they got painted. Repair guys made $15 base. With production incentives they could make up to $22 an hour. I was happy making $16 to load trucks. Pallets weighed 62 pounds apiece.
Guys had back problems
Shoulders rotator cuff etc.
Don't know where you live but 15 an hour is not enough for that type of work where I live
22 sound more like it though
If you were getting payed 16 loading them with a forklift that not that bad
I think I make 40x290 faster than that lmao 😂😂
no one cares lmao
When they ship the pallets to stores do they ship them on pallets?
David Hughes yes
LOL what a dumbass. Think about what you juts wrote
@@piochin23 actually it's not a stupid question I used to build ( now repairing) pallets and certain pallets can't go on the ground like pallets that r used for food so instead of taking a stack and putting it on the ground and then grab the stack thats on a pallet it's just faster to grab the stack and load it so yes some pallets can be shipped with a pallet on the bottom it just ur pallet company u work for they r just to cheap to give 24 free pallets away
Recycling pallets jobs
werry slow :))
Рихард Павловский that much we can work because thus is end of the day
oh aye..☺ wheres this at?
Sua Mal Ama australia
holy shit that would be so boring no music or nothing just nail guns all day lmao better have a good coworker to talk to
They cost so much to buy might as well make my own or haul them off a place where they are not needed
How much you guys get paid now from back then??
maybe 6$ an hour
saw a place by my work that does this. watching to see how it goes before i apply
what you mean brother?
its really not that hard work man.
Working at a pallet place is pretty easy. Currently workin at one now.
You can do it man
thank you
He dropped one...
1 pallet in 2 mins I make 3 pallets in 1 min
I seriously doubt it, I will etransfer you 100$ per pallet if you can make 3 in 1 minute from scratch, no set ups.
Wow! Your my hero lol...
@@jordankelly2190look at his profile picture hes a kid lying
No blowouts?
nice.
#totalpackagingsolutions
Y'all wasn't fuckin around.
Ill Will 😁😂
👍🏽
do pallet makers make a lot of money? can they make up to $2000 a paycheck?
saisai sama no very poor 38hours $636
thanks. my friend told me about how pallet makers can make up to $2000 a paycheck working for a company called propak. i was kinda skeptic.
@@baheerathan8307 38 hrs for 636 after tax per week? that is too cheap...i worked in A & L Windows and similar job get 24.33 per hrs before tax. nearly 800 dollars per 38 hrs per week. maybe you should consider that?
We get payed .75 cents per pallet and new pallets 1.50 depends on how you get paid hourly or on how many your repair i repair 400+ 8hrs
theres places that pay good and some pay cheap, same as any other job
Pretty average for end off day though
I make 3000 a day all by my self that includes cutting the wood and solid oak and hickory and black walnut
Свака част за закивање екстра,ал слагање дашчица може брже
on my work place
Let me guest they make each pallets per $0.60 cent
How is that fast? Hope you're on an hourly rate, not a piece rate.
Put my headphone and gun it
what's the hourly pay for a job like this in the us?
JrV2017 you asking about U.S?
Bahee rathan Yeah U.S
I'm in Australia i don't know
Minimum
JrV2017 I'm not sure in us australia pay hourly $22 dollars
Slow as fuck guys
Crank em out faster
Company profits and u profit.
call that fast he'll no go and visit southern pallets and for yourself
Well thats s;ow
That's slow mate me and my mailing partner would smoke use with ease
😉 yeah bro if me and my frd making more fast now batter then fast pallet maker intha world thank you 😊
sound like a hater stright up. how bout keep the comments to yourself
This is end of the day mate
Of course always a jack ass who is better let's see your video shut up
Check our video how we build pallets !! Good work
Guns are not for production. No where near as fast or as good at making pallets. These pallets are made with substandard nails. Wire is .083 or .099 not machine grade .115 or .120 in diameter. Gun nails have poor threads or rings so they are easier to drive. Holding power is next to nothing and the steel in the nails is lower grade allowing them to bend easier and make shiners. And the clincher (no pun) is that these nails cost twice that of loose nails. That alone will pay for a real nailing machine.
+Bonnie Lee Williams LOL so you guy's Call it Pallet making? like for real ?? LMAO ! ! ! Around Here We Call it pallet building And the guy's Who operate the Hand nailer's/nailguns..... Me Are Called Builder's So Are y'all Called maker's ? Or Pallet Maker's ? Just Curious pallet makers Sound's kinda yankee To Me
Bobby Singer we're makers beccous pallet not only nailed
Woodglut plans are amazing!
that's to slow
Edwin Morales what we can do we are child 😂
+Bahee rathan LOL BULLSHIT!!! Y'all Slow AF BRO......JS
Bobby Singer 😜😁
I WONDER HOW LONG THEY CAN KEEP THAT PACEE UP ...
all day keep making
New's flash They are not that fast i am way faster than These guy's
Bobby Singer that's great
Congratulations! You have won a trip for 2 to nobody gives a fuck
Slow
Slow asf
That shiii slow
call that fast he'll no go and visit southern pallets and for yourself
call that fast he'll no go and visit southern pallets and for yourself