I bought one today, first chainsaw I've bought personally, been itching to go out and drop some trees but it's supposed to rain all day so I'm just anxious and will watch videos to fill my time
Funny how that always happens! I think you will be happy with the saw. There is a particular way to cold start them FYI. Full choke until it sputters once. Then half choke, as soon as it starts tap the throttle to turn the choke off. In total, it should take you 5 pulls to cold start
When it comes to tools, typically what you pay is what you get. Stihl would have to make some terrible product choices to make me switch. They are the gold standard. Although that point can be argued, the other comparable companies are in the same ballpark.
I bought one aboout 9 yrs ago, good weight, power, and size. mine came with a16" bar. . I was HOPING it would be a good saw to strap onto my atv. first thing, it leaks chain oil constantly, making a mess on my atv. my saw has been the most finicky i have ever owned.
I am sorry to hear that. The only thing mine does is leak bar oil in storage. Which is normal, yet very annoying. There are fixes for that issue. As far as it being finicky, I suggest you take it into a hardware store dealer. They should be able to re'tune the saw, It will completely change the way it runs.
@@LuckyLoonOutdoors it is in the repair shop, same company I bought it from. The leak is from a vent, the fix was unavailable. Service is not the best in this city. If you do get good service in Prince George b.c., then you are lucky!
@danielpadgett2831 It can be, thats why you have to decide whats most important to you, and to be honest with yourself about the majority of what you will use the tool for.
Thanks for the video. I’m thinking about getting one of these. It was recommended by the mechanic at the Ace Hardware. He said this has a little more power. I did watch a few reviews and there were some plastic pieces that were not as good as the 261 was built, butif you can run that thing for six hours at a time, I probably don’t need anything bigger than that. Comes with the 18 inch bar. Not sure if I should get the 20 or not.
@@LuckyLoonOutdoors yeah I heard you mention that. I will look into it. Thanks for all the advice. I think I probably will just get this saw. I worked for a tree company and my old boss was telling me I need to get the $900 362. I think for what I need this 271 will be plenty big enough and should last me for years.
I am sure it will. It has been able to cut down everything I have needed to cut. Mine has probably cut down around 80-100 trees in its life so far. 0 issues
Glad I could help. One thing you will notice is stihl uses similar components from motors, to the tools used to service them accross most of all their products. So parts are easier to get, and easier to work on. their equipment is is put together pretty well and is reliable. The only other brand I would really consider and have used a lot in the same ballpark would be Husqvarna, they produce good saws as well.
Exciting! Break in was a long time ago for me. If I remember right, I had a pretty good sized log and ran it not on full throttle, slowly making cuts through the log carefull not to put it under much load at all. I most definitely didnt do 3 tanks worth of fuel though. I suggest following the manual, start cutting things that you need to cut, but very slowly and without adding a lot of load. that way at least you can get some stuff cut and break in at the same time. DO not cut any sizeable trees down as you will almost certainly put load on the saw when doing so. When I say cut slowly, I mean keep your rpm consistent like 3/4 throttle and apply light pressure into the cut. If you push too hard you will start loosing RPM and putting the saw under load.
I've never owned my own saw dude, just left Ace Hardware with a brand new Farm Boss......just bought some land and 1.5 acres of covered is untamed growth, vines killing giant tress for decades....going to sub, wish me luck!
I bought one today, first chainsaw I've bought personally, been itching to go out and drop some trees but it's supposed to rain all day so I'm just anxious and will watch videos to fill my time
Funny how that always happens!
I think you will be happy with the saw. There is a particular way to cold start them FYI.
Full choke until it sputters once. Then half choke, as soon as it starts tap the throttle to turn the choke off. In total, it should take you 5 pulls to cold start
I’ve had mine for 4 years now. It’s been great.
good to hear! Same experience here.
i have this chainsaw and it is a beast!!!! every saw at home depot is 🗑
When it comes to tools, typically what you pay is what you get. Stihl would have to make some terrible product choices to make me switch. They are the gold standard. Although that point can be argued, the other comparable companies are in the same ballpark.
Professionals will charge you up to 10k using Echo's. 😂
I bought one aboout 9 yrs ago, good weight, power, and size. mine came with a16" bar. . I was HOPING it would be a good saw to strap onto my atv. first thing, it leaks chain oil constantly, making a mess on my atv. my saw has been the most finicky i have ever owned.
I am sorry to hear that. The only thing mine does is leak bar oil in storage. Which is normal, yet very annoying. There are fixes for that issue. As far as it being finicky, I suggest you take it into a hardware store dealer. They should be able to re'tune the saw, It will completely change the way it runs.
@@LuckyLoonOutdoors it is in the repair shop, same company I bought it from. The leak is from a vent, the fix was unavailable. Service is not the best in this city. If you do get good service in Prince George b.c., then you are lucky!
Your right bro the bigger the better. I made that mistake, but won't do it again
nothing more frustraiting when you have a saw that is underpowered for the job. overpowered isnt a problem.
Over weight is a problem too@@LuckyLoonOutdoors
@danielpadgett2831 It can be, thats why you have to decide whats most important to you, and to be honest with yourself about the majority of what you will use the tool for.
@@LuckyLoonOutdoors absolutely right
Thanks for the video. I’m thinking about getting one of these. It was recommended by the mechanic at the Ace Hardware. He said this has a little more power. I did watch a few reviews and there were some plastic pieces that were not as good as the 261 was built, butif you can run that thing for six hours at a time, I probably don’t need anything bigger than that. Comes with the 18 inch bar. Not sure if I should get the 20 or not.
I think if you are buying this size saw, you should probably have the 20" bar.
@@LuckyLoonOutdoors Are you just running a standard chain or is the chain upgraded?
@@MrDuffy81 I am running a standard stihl chain. but use the 2 in 1 filing guide.
@@LuckyLoonOutdoors yeah I heard you mention that. I will look into it. Thanks for all the advice. I think I probably will just get this saw. I worked for a tree company and my old boss was telling me I need to get the $900 362. I think for what I need this 271 will be plenty big enough and should last me for years.
I am sure it will. It has been able to cut down everything I have needed to cut. Mine has probably cut down around 80-100 trees in its life so far. 0 issues
Good general purpose 50cc saw.
Thanks for the review. I’m looking for a saw at the moment so this was helpful. 👍🏻
Glad I could help. One thing you will notice is stihl uses similar components from motors, to the tools used to service them accross most of all their products. So parts are easier to get, and easier to work on. their equipment is is put together pretty well and is reliable. The only other brand I would really consider and have used a lot in the same ballpark would be Husqvarna, they produce good saws as well.
I got the 261c-love it trying to get the light bar for it tough to get
thats a good saw! little bit lighter too without sacrificing very much power.
I heard some turkeys gobbling 😉
We have 3 royal palm turkeys that run free around the farm. And there are a bunch of wild ones too!
I like my ms271. Do you have trouble starting it for the first use i mean cold start
Not too much. Just full choke it until it sputters a little, then half choke it, and it should start.
Pretty typical with small gas engines
Bought mine yesterday! Manual says break-in period of 3 gas tanks and not full throttle, under no load. What method did you use? Good review video!
Exciting! Break in was a long time ago for me. If I remember right, I had a pretty good sized log and ran it not on full throttle, slowly making cuts through the log carefull not to put it under much load at all. I most definitely didnt do 3 tanks worth of fuel though. I suggest following the manual, start cutting things that you need to cut, but very slowly and without adding a lot of load. that way at least you can get some stuff cut and break in at the same time. DO not cut any sizeable trees down as you will almost certainly put load on the saw when doing so.
When I say cut slowly, I mean keep your rpm consistent like 3/4 throttle and apply light pressure into the cut. If you push too hard you will start loosing RPM and putting the saw under load.
Just start using it was my break in, ms261c. Starts in any weather.
I've never owned my own saw dude, just left Ace Hardware with a brand new Farm Boss......just bought some land and 1.5 acres of covered is untamed growth, vines killing giant tress for decades....going to sub, wish me luck!
👍👍👍👍👍👍
Was thinking about this saw. But I went with ms 261
I have had 0 issues.
Sweet