How to Install a Water Pump for a Jeep 4L 6cy Engine - Advance Auto Parts
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- video.advanceau... How to Install a Water Pump for a Jeep 4L 6cy Enginel - Advance Auto parts: watch this video featuring products available on AdvanceAutoParts.com.
Very clear instructions, all in a 4 min video. I can get to work now. Thanks
How do I remove the fan clutch to pull the shroud and fan out?
awesome. I mean it's bad news for me most likely but you were very concise and didn't waste my time. great instructional video. Thank you.
Can anyone tell me where I could find a Water pump pulley for my 2000 Jeep Grand Cherokee Laredo
Will just the gasket be OK to use by its self?
Nope, leaks in my experience.
I used 90 min permatex, no gasket.
Quick question.
I have coolant in the reservoir
And the rad but i got low coolant warning.
What will be causing me to get the alarm?
dyerstraight73 bad level sensor maybe
Hello sir! I have a question, what did you use to clean the surface where the pump is fastened and the inside of the pulley with? (looks like sandpaper, but what type?)
Most likely Emery Cloth its called. It looks like sandpaper but its not and comes in different grit sizes.
How the hell do get the drivers side bottom fan shroud bolt out?
Good question. And did he put it back in ha ha
When do you torque the pulley bolts?
That’s what I’m saying tho
exactly what I needed. thank you very much.
The fan shroud does not have to come out.....plenty of room. Upper hose is not in the way either....
Thanks Richard ! Excellent training for my WJ
What kind of tape did you put on the pipe going into the water pump?
It is most likely teflon tape.
Thanks so much! Already fixed it : )
After 2 months, I figured. lol. But thought eh, just in case. :P
Haha it's cool, thanks anyway!
Glad to (sorta, not really) help!
You also have to move the power steering pump bracket out of the way. Just saying !
Yes it is that way on my '98 ZJ. They are doing this on a WJ in the video.
I didn't have to on my 92 XJ, just required a little finessing, only unbolted the fan from the clutch to get a little extra room to get the shroud out, was able to wiggle it out gently and slide it out on an angle, did need to remove the idler pulley to let the inlet tube have room to pull out
what year is this jeep
Flange to flange requires ANAEROBIC sealants. That black RTV will not cure 100% and cause leaks later. Why, no oxygen to cure it inside two smooth flanges.
How does this vehicle not have a working fan??
A clutch fan? I took mine out because it was failing/ you can run off just a electric fan
Fantastic thank you
Not very good video. Hardly shows anything.
Too bad this isnt a 97 tj wrangler
terrible video, I can't see anything. editing is terrible.