I grew up doing leathercraft with my mother and inherited her tools when she passed. At the age of 52, after retiring from the military and LE, I'm coming back to this craft with inspiration from you. Blessings from Nashville, TN.
Awesome, thank you! I was actually going to put this pattern on my Etsy page. Be on the lookout. I just need to tweak it a little for public consumption. :)
I've gotten to the point that I hit the 'like' button before I even start the video. I already know that I'm going to love it :) Keep up the great work!
That's good stuff, as always. You come up with some creative ways to form bonded edges, by sewing and folding over the top. Also, that's a good simple solution to hold the cylinders, and still be able to push them up and out from the bottom. I need to make a cylinder holder for my '58 Remington. I'll incorporate a few of your ideas when I make mine. Thanks for the awesome video.
@ Dayam good! Love it more than ever. Your leather work was the cherry 🍒 on top for sure. I have a 454 Casul, and I’ve got a pancake holster. Need straps to strap to chest.
Very nice as always. I really enjoy watching your videos; I learn a lot from them. I like that brass stamp you used. Do you mind sharing where you purchased it? I didn’t see it in Tandy’s online website. Thanks in advance.
The ending is just gorgeous, thanks for the video, but lately I've been burning out all the shapes with a laser! Is this manual work for the content, or do you like to work this way too?
I sell this pattern on my Etsy page and this video is sorta to accompany it. I know most people aren't going to have a laser to cut stuff out with (yet . . . they're so cheap nowadays).
Love your work, you are one of the two leather workers who have Inspired me to get into this amazing field, I do have a question though, would you mind sharing the name of the glue you use, please. All the very best from Scotland
Thanks! That particular glue is "Ecoweld water based contact adhesive" as sold by Tandy Leather here in the U.S. There's an almost identical adhesive that may be easier for you to get in Scotland: "Renia Aquilim 315". Hope this helps!
It's a Craftool keyhole punch. I have a link in my Amazon store (in the video description). Note they come in different sizes to match the different stud diameters.
If you're going to have a speed loader for something like that, do you not think that it would be a good idea to have an off hand holster to put your barrel into while you handle switching the cylinder? I know it would just be more stuff to deal with, but on the other hand it would be more stuff to _make._
I grew up doing leathercraft with my mother and inherited her tools when she passed. At the age of 52, after retiring from the military and LE, I'm coming back to this craft with inspiration from you. Blessings from Nashville, TN.
All right, just what I've been looking for.I wish you sold your patterns. Outstanding as always
Awesome, thank you! I was actually going to put this pattern on my Etsy page. Be on the lookout. I just need to tweak it a little for public consumption. :)
@RoadAgentLeather thank you. I'll be looking for it
Once again an amazing project. And love the tip of glueing the end of the stitch. Keep up the magic!!!
A master using all of the leather skills to perfection. Your creativity is off the charts.
Thanks! I'm glad you enjoyed it!
I've gotten to the point that I hit the 'like' button before I even start the video. I already know that I'm going to love it :) Keep up the great work!
Thanks for watching my channel!
Excellent design and I am a fan of your work. All your holsters have amazing details and all done with precision.
Always a pleasure to watch a master craftsman create things of beauty!
Thanks!
Chris Walken: “I got a feva! And the only cure is more Flute Music!” Wonderful craftsmanship, as usual!
That's funny! I definitely get the "more flute music" feeling after a long project.
So many great techniques and build ideas!! Thank you!
Glad you liked it!
Your designs are so unique. Always love your videos.
Thanks, I really appreciate it!
Always a good day when a new video post!
I'm happy you like them! I enjoy making them!
That's good stuff, as always. You come up with some creative ways to form bonded edges, by sewing and folding over the top. Also, that's a good simple solution to hold the cylinders, and still be able to push them up and out from the bottom. I need to make a cylinder holder for my '58 Remington. I'll incorporate a few of your ideas when I make mine. Thanks for the awesome video.
I've been a fan of your creativity for some time now and I also like the tools you use they're also creative! Thanks
Beautiful custom work. I always enjoy your work an always pick up a tip. Thank you and HAPPY THANKSGIVING 🦃👍👍👍👍👍😎
Happy Thanksgiving to you, too!
For a minute, I thought you were driving punches into a Marble!! 🤯
wait, at what time stamp?
@@RoadAgentLeather3:56 I believe, thought the same myself, lol, then it zoomed out and I was like woah! What kind of punch board is that??
Outstanding work manship
Thank you very much!
love to watch you work !
Thanks! Glad you enjoyed it.
Wonderful craftsmanship😊😊👍👍
Thanks again for subscribing!
Now that is a sharp knife!
love your videos,thank you for another good one.
Thanks for watching!
Amazing to watch
that is gorgeous!
Very nice brother! 🎉
Thanks man. How's the knife holding up?
@ Dayam good! Love it more than ever. Your leather work was the cherry 🍒 on top for sure.
I have a 454 Casul, and I’ve got a pancake holster. Need straps to strap to chest.
Very nice 👍🏻
Thanks!
Very nice as always. I really enjoy watching your videos; I learn a lot from them. I like that brass stamp you used. Do you mind sharing where you purchased it? I didn’t see it in Tandy’s online website.
Thanks in advance.
Thanks. Go to Etsy and copy/paste in the search bar "Tools for leather crafts. Stamp #29"
What type of Emery boards or sanding boards were you using at 3:24? Thanks and great content!!
those are the "Premium Ultra-Precision Softback Sanding Sticks by Infini Model" from Micro-Mark.com
The ending is just gorgeous, thanks for the video, but lately I've been burning out all the shapes with a laser! Is this manual work for the content, or do you like to work this way too?
I sell this pattern on my Etsy page and this video is sorta to accompany it. I know most people aren't going to have a laser to cut stuff out with (yet . . . they're so cheap nowadays).
КАК ВСЕГДА ВЕЛИКОЛЕПНО!!!
Thanks again!
Awesome buiid. Whats the music used in the video? I've heard it before
It's "Jaracanda" from Apple's iMovie audio library.
Музыка взывает раскурить трубку мира, и создать шедевр, по подобию! Класс 👍
Thanks for watching!
Is that dye in the airbrush at 8:00 minutes?
Yes, it's Fiebing's russet. I decided it needed more contrast. I would normally do any airbrushing before the antique paste.
Love your work, you are one of the two leather workers who have Inspired me to get into this amazing field, I do have a question though, would you mind sharing the name of the glue you use, please. All the very best from Scotland
Thanks! That particular glue is "Ecoweld water based contact adhesive" as sold by Tandy Leather here in the U.S. There's an almost identical adhesive that may be easier for you to get in Scotland: "Renia Aquilim 315". Hope this helps!
@RoadAgentLeather thank you, I will try and find it.
nice
Thanks!
Beautiful as usual. What stamp is that I looked in amazon and didn’t see it. Thanks
Thanks. Go to Etsy.com and copy/paste in the search bar "Tools for leather crafts. Stamp #29"
How long do you let oil dry before putting dye on? Love your work
I usually dye FIRST with the Fiebings. It's alcohol-based, so I apply neatsfoot oil afterwards to rehydrate the leather.
ídolo!!! 😍😍😍😍
Hey! Thanks again for watching!
👍😊💯
do you sell any of your patterns digitally. if so where can i purchase this pattern?
The pattern for this is up on my Etsy page. btw, Thanks for subscribing!
Huuuuyyyyyyyyyyyy huuuufffffffffffff que bien 👌👍 saber de cuero
Thanks for watching!
What type punch for the steel button?
It's a Craftool keyhole punch. I have a link in my Amazon store (in the video description). Note they come in different sizes to match the different stud diameters.
If you're going to have a speed loader for something like that, do you not think that it would be a good idea to have an off hand holster to put your barrel into while you handle switching the cylinder? I know it would just be more stuff to deal with, but on the other hand it would be more stuff to _make._
interesting point. Thanks for leaving a comment!
that was cool. Just out of curiosity, how long does it take you to make that, knowing that you are experienced...
I can usually whip one of these up in about a day if I'm in the zone (and have the time), but it can take longer. A couple of days maybe.
@RoadAgentLeather thank you...
Wow!!!
Lindo trabalho
Where to buy this?
shoot me an email.
How many bars do you set your areography to?
huh? you lost me.
@@RoadAgentLeatherEight minutes ago, you adjusted your air compressor. To what value?
Te rog eu frumos poți să îmi spui din ce stat sunteți❤❤
Hi. I'm in Texas, USA
Cât m ar costa pe mine să îmi faci și mie o gentuță din aia la comandă
shoot me an email.
@RoadAgentLeather mulțumesc pentru comentariu Domnul