You should make a video about how to build it too,this is a teardown video,but there's no part where you assemble it back,and you're supposed to build it,so it should be important
I'd love to make one of these if it could take spring thunder shells. Also, If you ever make another version of this, could you make it an over under style?
I have some suggestions for the foam-a-nature maybe you could make a version where it primes using a hammer kinda like the double strike just thought it would be cool because I don’t really like how you would have to pull a T stile like priming handle to prime it.
I'm printing this blaster now, but cannot find a 2" chicago bolt online except in quantities of 100. I really hate to drop $30 for one bolt (and have 99 spares). Do you remember the supplier? Can't wait to get this assembled.
I also had to buy 100 chicago bolts. That's just how ordering hardware online typically goes. You could substitute the chicago bolt with a metal dowel/rod of the appropriate diameter(~3/16 or ~5mm) and secure on both sides of the blaster with cotter pins(or similar). A chicago bolt is just a cleaner looking alternative.
ehdrien if you take a rival saturn and turn it into a half length lever action prime you might just need a restraining order to keep me at bay... jk but really i would love to see something like that
So I've got a couple of questions. How big is this blaster? How much did it cost to make? What fps ratings does it get on average? And did you put O-rings on the shells?
With the stock, 21 inches, without the stock, 16 inches. ~70fps for a single Rival ball, ~90fps for a single short dart. I didn't put O-rings on my shells, but it works just fine if you do have them.
Hi. could you please do me a very big favor?? it would be great if you could give me the measures of the hardware in metric scale. this would be outstanding. :D also: how much % of infill did you use to print?
@ehdrien hey could u like make a tiny spring and send it to me I do not have the tools to do that and the only thing I have is my printer and multi tool screw driver to tighten my screws when u can get back to me asap thanks
Sorry, you're going to have to bend that spring yourself. I showed how to do it at the end of the video and the only tools you need is a small nail hammered into a board and a pair of pliers.
![[TF2] I'm a FaN of The Force-A-Nature!](http://i.ytimg.com/vi/tGfA_89L0Sc/mqdefault.jpg)
That foam spring will give new life to the back half of many darts.
This is a better design then the mainstream double barrel nerf blaster.
Lots of really amazing stuff here!
You should make a video about how to build it too,this is a teardown video,but there's no part where you assemble it back,and you're supposed to build it,so it should be important
I'd love to make one of these if it could take spring thunder shells. Also, If you ever make another version of this, could you make it an over under style?
It does take spring thunder shells
Would it be possible at all to make the brass piece rotate to another barrel on prime ?
I have some suggestions for the foam-a-nature maybe you could make a version where it primes using a hammer kinda like the double strike just thought it would be cool because I don’t really like how you would have to pull a T stile like priming handle to prime it.
is the aluminum required theres three threaded rods connecting the front from the back already so it seems unnecessary
If you have a spring already can you use that instead of making one with music wire?
I'm printing this blaster now, but cannot find a 2" chicago bolt online except in quantities of 100. I really hate to drop $30 for one bolt (and have 99 spares). Do you remember the supplier? Can't wait to get this assembled.
I also had to buy 100 chicago bolts. That's just how ordering hardware online typically goes.
You could substitute the chicago bolt with a metal dowel/rod of the appropriate diameter(~3/16 or ~5mm) and secure on both sides of the blaster with cotter pins(or similar). A chicago bolt is just a cleaner looking alternative.
Can a longshot spring work?
Personally I would suggest selling assembled blasters
I agree
I'd buy in a heartbeat.
@@DraconisMarchVII for real
Yes
PLEASE
Can you put us a video of Winchester 1873 you are amazing
ehdrien if you take a rival saturn and turn it into a half length lever action prime you might just need a restraining order to keep me at bay... jk but really i would love to see something like that
what do you mean by M2.6x12 screws? Do you mean M2 6x12 screws, or is there such a thing as a M2.6 screw?
For the custom spring, would it be possible to modify a safety pin?
Ah I get it now, I actually play tf2 so I find this really cool and funny
Will a ender 3 v2 printer work (220x220x250mm building size) if not, which printer would work?
Bro can u leave a link to where you bought a tube for piston?
So I've got a couple of questions. How big is this blaster? How much did it cost to make? What fps ratings does it get on average? And did you put O-rings on the shells?
With the stock, 21 inches, without the stock, 16 inches. ~70fps for a single Rival ball, ~90fps for a single short dart. I didn't put O-rings on my shells, but it works just fine if you do have them.
do you sell hardware kits?
I am making this currently
what do you use for the shells that hold ammo?
It uses Spring Thunder shells.
How much for a premodern one bru
With what filament should i print it with?
pla/tpu
Hi. could you please do me a very big favor?? it would be great if you could give me the measures of the hardware in metric scale. this would be outstanding. :D also: how much % of infill did you use to print?
Note these are not on sail roght now so currently this is useless exept if you printed out all thenparts using the files
When will we be able to buy a pre built one
November hopefully. I'm working on a couple right now.
I’m gonna ask for one for Christmas
@@ehdrien1094 how much will they cost?
I can’t wait to get a pre-built one
Hardware kit please
Or at least a parts list
Bonk
Boink
bnk
@ehdrien hey could u like make a tiny spring and send it to me I do not have the tools to do that and the only thing I have is my printer and multi tool screw driver to tighten my screws when u can get back to me asap thanks
Sorry, you're going to have to bend that spring yourself. I showed how to do it at the end of the video and the only tools you need is a small nail hammered into a board and a pair of pliers.
Designing in inches is the biggest mistake you can make.
Make please more nerf shell weapon cuz hasbro won't do this.
Hey can you please build me a tko please I’ll even pay you