Wreszcie ktoś, kto otworzył (pokazał) silnik!!! Ile razy widziałem starannie pomalowany i złoszowany silnik, a następnie zamknięty!!! Nie rozumiem tego. Dlaczego nie stosuje się wyrwań z jednej strony kokpitu żeby pokazać jego wnętrze (jeśli jest zwaloryzowane blaszkami lub 3D)?
@@TV-ez4md No tak, ale jaki jest sens poświęcania kilkudziesięciu godzin pracy przy robieniu wnętrza bombowca a potem zupełnego jego zamknięcia? Prawdę mówiąc nie widziałem jeszcze (a oglądam mnóstwo kanałów o tej tematyce) żeby ktoś zrobił jakiekolwiek wyrwanie ukazujące wnętrze. Powiedz, czy zrobienie takiego wyrwania jest tak bardzo skomplikowane?
@@TV-ez4md The problem is there are two polish companies that recently made a new tooled PZL 37 and they are very different kits so hard to choose which one to get, hahaha.
Hard to describe, how great You've assembly this kit. I made this about year ago, and also have problem with these wheel bays, but at least it is not easy to see. And You used acrylic paints, which are even harder to paint with airbrush, but result is very fine. All the best for You! ;)
You are too kind. The wheel bays were more complicated than needed. I think I should re-visit AZ models plane, it had some things with gear bays too.. Those Vallejo paints are quite nice although they are acrylics.
How AZ's Doras turn out in comparison with IBG's ones? I've missed them when they were circling on the market and as far as I've seen they were pretty decently moulded with riveting and resin wheel wells and rear of the engine visible
In my opinion,( it is a while ago when I built AZ one, when it was released..) They were about the same surface details. Of course the resin needed some heavy sanding to fit into the wing and there was no aligning tabs. I have one in stash, I'm going to build it and make comparison video like with the Harriers.. But still some projects before that..
Nice one, really...and lot of FW...you're really fans of this plane hah..👍
absolutely impressive!! also that you recorded every step. I learned a lot. thanks! Purchased the Kit.
Thanks! Nice to hear that there was something to learn from! Good luck with your build!
O love the fw190 Dora. Good job!
Wreszcie ktoś, kto otworzył (pokazał) silnik!!!
Ile razy widziałem starannie pomalowany i złoszowany silnik, a następnie zamknięty!!!
Nie rozumiem tego.
Dlaczego nie stosuje się wyrwań z jednej strony kokpitu żeby pokazać jego wnętrze (jeśli jest zwaloryzowane blaszkami lub 3D)?
Pokrywa silnika jest często otwarta, ale aby otworzyć bok kokpitu, trzeba zrobić coś specjalnego. Być może w przyszłości..
@@TV-ez4md No tak, ale jaki jest sens poświęcania kilkudziesięciu godzin pracy przy robieniu wnętrza bombowca a potem zupełnego jego zamknięcia?
Prawdę mówiąc nie widziałem jeszcze (a oglądam mnóstwo kanałów o tej tematyce) żeby ktoś zrobił jakiekolwiek wyrwanie ukazujące wnętrze.
Powiedz, czy zrobienie takiego wyrwania jest tak bardzo skomplikowane?
Quite the lovely quality model kit. Never crossed paths with IBG before but i am considering the PZL 37..
Thanks! I haven't heard IBG Models either before this kit. I have no idea what their PZL 37 is like.
@@TV-ez4md The problem is there are two polish companies that recently made a new tooled PZL 37 and they are very different kits so hard to choose which one to get, hahaha.
@@mybluebelly There is an easy answer which I always make: Get both :D
@@mybluebelly pick IBG with closed eyes
Hard to describe, how great You've assembly this kit. I made this about year ago, and also have problem with these wheel bays, but at least it is not easy to see. And You used acrylic paints, which are even harder to paint with airbrush, but result is very fine. All the best for You! ;)
You are too kind. The wheel bays were more complicated than needed. I think I should re-visit AZ models plane, it had some things with gear bays too.. Those Vallejo paints are quite nice although they are acrylics.
Beautifully done! 👌🏼
Fabulous build. +1 New subscriber 😃👍
glad you liked the artwork , well done on the video cant wait to get my kit soon :)
Glad you liked my video! Good luck with your build!
🤝👍
How AZ's Doras turn out in comparison with IBG's ones? I've missed them when they were circling on the market and as far as I've seen they were pretty decently moulded with riveting and resin wheel wells and rear of the engine visible
In my opinion,( it is a while ago when I built AZ one, when it was released..) They were about the same surface details. Of course the resin needed some heavy sanding to fit into the wing and there was no aligning tabs. I have one in stash, I'm going to build it and make comparison video like with the Harriers.. But still some projects before that..
@@TV-ez4md I need you to do this video