It's great to see father and kids working together and make it work. You father has a great wisdom with equipment because all the equipment he has ran.
Just started watching and I've already got a comment 😂 first combine I ran when I was a kid was a 65 gleaner E. Aftermarket white fiberglass cab. 10' rigid grain table an 2 row wide corn head. Now I have a 90 CIH 1660. Wow what a difference! Keep up the good work Bob.
I was pulling out a dozer that was stuck in the mud with my dozer and it lifted the backend of my dozer over off the ground maybe a foot or a little less. The wire rope snapped and my dozer crashed back down that foot or so. I didn’t have my seatbelt on and it threw me into the top of the cab. I’m still surprised I didn’t break my neck or worse because I hit so hard. That was the last time ever that I didn’t put my seatbelt on. It only takes one time and it happens faster than you can react. Now, even when I’m getting in my car or truck I put my seatbelt on before I start the car or truck. It’s the same thing I do when I get on any piece of heavy equipment regardless of how easy the job is or how smooth the terrain. I got lucky that one time and that lesson was learned.
I work for a Helena fertilizer and chemical location here in western Minnesota. It was very wet for late spring and early summer. We really didn't have any trouble getting the fertilizer floaters stuck but the big sprayers were stuck many times. The hillsides were the worst. For a period of time some of the ground was dry on top but mush underneath. We run pretty fast when spraying and one of the guys fell in so fast and deep that it threw him out of the seat on top of the steering wheel. The unit went down so deep and fast that the front fill tube was broken off. A safety lesson learned by all of us to say the least.
@@terenceblanchette9059 I’ve gotten dozers stuck in ground conditions just as you’ve described. Luckily not as hard of a drop but we move much slower on dozers. Back when I first started running dozers my boss dropped through a sink hole that hadn’t collapsed yet and literally stood his dozer straight down on the blade. It was the craziest thing I’ve ever seen. Busted his forehead open a little but was okay otherwise.
Thank you Brian and Bob for sharing your thoughts on the Ideal9. Really enjoyed listening to your conversation. Sad to hear about the drought in your area. Was almost drought condition in June up here in west central Ohio, but since then it hasn't stop raining. Corn looks like 250 bu plus and double crop beans look like they might easily make 50 if frost doesn't come early. With grain prices in the toilet it's going to be a difficult year for farmers even without a drought. My thoughts and prayers go out to your entire family for a safe harvest.
Thanks this video Brian and Bob. I thought this question and answer session was absolutely wonderful. I greatly enjoyed both of you just talking about the combine and farming in general. Very very informative and relaxing type visit with both of you. I thought it was a great session and really liked just be able to visit about farming. Do something like this again, many thanks!!!!!!!! The Iowa farm boy. Steve. 😊😊👍👍🇺🇸🇺🇸
Bob's looking very refreshed after the harvest. Nice combine. We have a relatively new AGCO dealer about 50 miles from our farm. Not many Fendt machines in our area yet, however, they will come with time.
It will be interesting to see how the Ideal will perform in corn/beans. We tried a 2022 Ideal . It worked well in the corn but we had trouble in soybeans as we had terrible green stems that year. Our CNH machines had trouble with them too. We kept a JD 9650 cylinder/walker machine with real aggressive cylinder bars and it would run them. We were all JD until four years ago. Our local dealership had been bought out several years before and we had just finally had enough troubles with the new ownership. We switched combines to CNH then an have Demoed CNH and AGCO planters and tractors since then. We planned to update two tractors this year but the low grain prices has move that back at least one season. Thank you for your review and opinions on the equipment you run.
Good information - I had wondered why you changed the concaves without any use on new parts but I know how fast and easy a task is done, the more likely it will be. Good video - keep up the good work.
There are examples of appropriately sized grain carts towed by the combine harvester (harvesting dried down corn for grain). The combine towed grain cart is filled by the combine's unloading auger straight behind. The grain cart has its own engine, examples usually have the grain cart's auger out to the left. If the combine cuts up and down on one side of the corn stand, the cart auger could be swapped to the right side of the towed grain cart. Similar is done in Western Australia with wheat etc harvesting on tramlines. In WA, the cart tractor to follow directly behind the combine harvester, the tractor has an auger from front to rear over the top of the tractor to fill the grain cart. (CTF controlled traffic farming)
CaseIH did work on a dual side unload at one time. it was a center auger that would swing out to either side. First thought was in the front of the grain tank but that made the auger too high and put limits on grain tank size and extensions. Second thought was at the rear of the tank but limited the operators view of the auger along with having the auger sticking out the back of the combine for miles as well as made accessing the engine compartment difficult.
It requires a clean sheet look at combine design to implement a layout that would be functional. If anyone else remembers, the ideal was touted as a clean sheet design, but other than massively long rotors it's hard to say they really diverged from what was the well trod path of legacy designs. Probably difficult to get something different to pass a board meeting in a big company, but my hats off to anyone who still believes real innovation is worth pursuing and keeps trying anyhow. We need that more than ever
It’s so hard to tell just how big the machines on video. I usually gauge the height by you standing next to the track. You said the width of a dual is 17-18 feet, so I measured it out in my house. I live in mountains in PA, mostly Amish farms(who use actual horse power) or smaller farms with combines half the size. Idk how they keep from rolling on the hillsides they run here. If you look up Lycoming County PA, you’ll see mountain farming
Great Video the Brown Family, My comment would be that Gleaners have always been odd combines, claas are high capacity and reliable, the Ideal is a new combine and you guys have had a attractive deal, thanks for sharing
That's a really good synopsis of the first run with the combine. Given your labor situation, I think you did the right thing going with bigger capacity over 2 machines, especially with planting behind the combine, and having at least one hauling the grain away from the combine. The tracks will pay you back for years to come, less compaction. Great video!
Always good to see Mr. Bob and very informative Brian I feel yalls pain with the dryness we had so much rain the first half of the year and now we can't beg for any in east texas.
Took out a x9 1000, an ideal 8 this past weekend on demo. Both great combines with definitely the best hopper samples I've seen in any machines. Both very user friendly and very comfortable to operate Not afraid to own either but I an leaning on the fendt. Really a sweet machine
Pros to the fendt to me was the cooling system setup The full length rotors/ gearbox location The bottom feeding cone setup cause wrapping on our current red combines can be a problem. Visibility in the cab Deere pros was the giant feederhouse, it has to be a beast in canola, and I get not everyone deals with that weed The corner post display, I still like my basics in one place The seat was more comfortable and the massager in there, not too shabby but when I plug the fendt up I likely won't be suffering back pain LoL The sample of both the combines was seed quality which I found unbelievable I could actually go on for quite a while
The first self-propelled combine on our farm was a Gleaner E just like Bob back in the 70's. The biggest Gleaner we ever had was an M2. My brother now runs Case IH.
Thanks for the excellent presentation about the Ideal combine. The sensitivity of the steering joystick should progressively decrease with increasing groundspeed.
Like the difference between a zero turn mower and a regular mower. The response is instant, no slack in steering like a steering wheel. Once you get use to it you don't go back.
@208SledHead at the dealership I work at, we can't keep them on a farm. They get rid of them after 1 season. The fendt can't get a clean sample. When fendt figures them out, they will be an amazing machine, they are just not there yet. Great on small grains.
I remember a combine with the dual sided unloaded being tested in our wheat . I was 10 yrs old I think. Versatile 2000 pull type . It ran circles around our L2 till they cooked the engine on their tractor 😅
Saw quite a few Fendt combines out west (US2 from west coast to MInnesota) but there are very few, as in none in my area of WC Indiana. Geringhoff heads have become very popular around here, in fact the local CIH dealer is selling them. The nearest AGCO dealer is 70 miles away, so that makes service calls challenging. Probably 60% green, 35% red and a few yellow machines around here. Very enjoyable discussion, thank you.
Very good video Brian and Bob one question in old days farmers left the unload auger out all the time in the field now it’s folded in is it because of weight
It's like "Workin Words"!!! I really enjoyed your podcast and would love to hear more. Your father is so hard to understand in the videos but I really like to hear what he has to say.
I was working in Idaho one year and they got 15-20" of rain on wheat, barely and down hay. The black mold was so bad the combines looked like they were on fire, the big balers looked like they were on fire, and I was miserable. Most of the malt barely sprouted and the brewers wouldn't take it.
The review was very interesting and honest. In my opinion. Was surprisingly surprised about liking the Joystick. I figured dad would be hard to get used to. 😊 Old gays can learn new tricks 😂
Enjoy your videos very much. My family visited Ruby Falls in Chattanooga TN last week and saw a picture on their wall of a Bill and Bessie Marlow in the 1940’s. It was donated by Nancy Marlow Brown of Chillicothe. I took a picture of this if this is part of your family
Biggest problem with going from 2 machines to one is when you want to run two different crops.. otherwise it's nice just have one machine and an extra guy to do all the other stuff and hual a few loads.
Yes always wear your seat belt. My cousin was thrown from a combine crossing a highway. got hit by a semi truck. Broke both legs and an arm. He lives to tell the tale. He wont drive a pickup now without a seat belt now.
talking about the powel ladder thats cool but i think Claas were very smart with their,ladder being portable you can use on several locations,for,servicing,or repairing.
With long enough auger you can unload having it turned back, just get the tractor right behind the head and turn the auger over the wagon. At least with Claas you can.
@@BriansFarmingVideos I wonder if it is the ideal drive that slow down the steering. We went from a 770 TT to a 10T whit steering wheel and 900 mm tracks and 750 rear wheels. The 10T steering is way faster and twitchy than the old 770 making it easier to turn on the headland.
Once again you guys give very good reviews. Cut to the chase and you don't just talk about cup holders. I was very interested to know on what year they did upgrade the rear impellers in the back of the combine. I am wondering if the aftermarket impeller upgrades on the 22 and older ones actually worked right. And the meantime if I ever buy a Fendt ideal combine it won't be anything older than a 2023. I think if you're not combining a lentils or canola I think the combine's going to serve you well
Did I hear right. There's a second combine on its way? Just like you, I would be concerned about my dealership making BIG changes. Here in Indiana it's been a nightmare. No matter what anyone says, service and sales controlled by a headquarters located in another state matters. Poor support for the communities, (FFA and 4H and county fairs) and pricing and customer satisfaction is less a concern for the company. Bob, you'll remember back in 1974-75, we had a black dust on our wheat. Came in looking like a coal miner. (i was combining with a Gleaner E 3).
I reme,ber in 2001 I went from 2 to 1 combine because of labor I became more efficient w. When I ran 2 a lot of ti,especially one broke both stopped to fix it
They already had a prototype 50ft dyna flex head on a Gleaner with a swivel auger like they got that was folding. Agco wouldn't allow engineering to test strength of auger , just the header. Since all they care about is developing crap for fendt. They only spend a million or so on improving Gleaner a year but 5 to 10 or more times that improving fendt. Should of stayed with Gleaner, they can run 5000 bushel an hour. Someone out in Kansas is doing it with 16 row head on it. For the flat ground you guys run, it would do it there too. Less parts, less weight, easier to service, easier to set, and a lot cheaper to run with the Gleaner. T1 series has some nice updates that im not going to say other than it has transmission and finals of ideal 7. If they can hold up on that overweight turd, they'll last forever on a Gleaner. Dynamite comes in small packages but gives big results.
Is this a first-meaning suggestion? If so, you have no idea about agriculture. Farmers are not posers. And good visibility is extremely important, especially in a combine harvester. The windows are already dirty enough through the dust and you want to tint them? That can only be a joke.
Use code BFV50 to get 50% OFF your first Factor box plus 20% off your next month of orders at bit.ly/3V76JKb!
You should try to cut back on the factor meals and get in shape for harvest
Very considerate of you and your father to take time to answer questions.
It's great to see father and kids working together and make it work. You father has a great wisdom with equipment because all the equipment he has ran.
Pop is a legend. He raised some hard workin kids.
I salute anyone our age still working
Just started watching and I've already got a comment 😂 first combine I ran when I was a kid was a 65 gleaner E. Aftermarket white fiberglass cab. 10' rigid grain table an 2 row wide corn head.
Now I have a 90 CIH 1660. Wow what a difference! Keep up the good work Bob.
Brian your dad did a great job with the video 👍I’m glad he agreed to sit down and talk with you and discuss the new fendt
A lot of great questions and answers. Two more different crops and we'll get the whole picture of how the Fendt holds up. Great video, thanks.
I was pulling out a dozer that was stuck in the mud with my dozer and it lifted the backend of my dozer over off the ground maybe a foot or a little less. The wire rope snapped and my dozer crashed back down that foot or so. I didn’t have my seatbelt on and it threw me into the top of the cab. I’m still surprised I didn’t break my neck or worse because I hit so hard. That was the last time ever that I didn’t put my seatbelt on. It only takes one time and it happens faster than you can react. Now, even when I’m getting in my car or truck I put my seatbelt on before I start the car or truck. It’s the same thing I do when I get on any piece of heavy equipment regardless of how easy the job is or how smooth the terrain. I got lucky that one time and that lesson was learned.
I work for a Helena fertilizer and chemical location here in western Minnesota. It was very wet for late spring and early summer. We really didn't have any trouble getting the fertilizer floaters stuck but the big sprayers were stuck many times. The hillsides were the worst. For a period of time some of the ground was dry on top but mush underneath. We run pretty fast when spraying and one of the guys fell in so fast and deep that it threw him out of the seat on top of the steering wheel. The unit went down so deep and fast that the front fill tube was broken off. A safety lesson learned by all of us to say the least.
@@terenceblanchette9059 I’ve gotten dozers stuck in ground conditions just as you’ve described. Luckily not as hard of a drop but we move much slower on dozers. Back when I first started running dozers my boss dropped through a sink hole that hadn’t collapsed yet and literally stood his dozer straight down on the blade. It was the craziest thing I’ve ever seen. Busted his forehead open a little but was okay otherwise.
I never got dozer stuck. I hope I don’t after hearing that!
Enjoyed the video with you and you're Dad. God bless you all
Honeybees are my favorite to watch. They really do look like they float like a bee.
What a cool comment 😎
Thank you Brian and Bob for sharing your thoughts on the Ideal9. Really enjoyed listening to your conversation. Sad to hear about the drought in your area. Was almost drought condition in June up here in west central Ohio, but since then it hasn't stop raining. Corn looks like 250 bu plus and double crop beans look like they might easily make 50 if frost doesn't come early. With grain prices in the toilet it's going to be a difficult year for farmers even without a drought. My thoughts and prayers go out to your entire family for a safe harvest.
Thanks this video Brian and Bob. I thought this question and answer session was absolutely wonderful. I greatly enjoyed both of you just talking about the combine and farming in general. Very very informative and relaxing type visit with both of you. I thought it was a great session and really liked just be able to visit about farming.
Do something like this again, many thanks!!!!!!!!
The Iowa farm boy. Steve.
😊😊👍👍🇺🇸🇺🇸
Bob's looking very refreshed after the harvest. Nice combine. We have a relatively new AGCO dealer about 50 miles from our farm. Not many Fendt machines in our area yet, however, they will come with time.
I always enjoy Mr Bobs combine review videos. I bet there arent many men on youtube with his experience.
He’s ran a combine since 1964 so probably not
He is MR FARMER........
Good video. Glad you like your investment!
Running about every color also! It's nice to get some prospective from someone who is unbiased
It will be interesting to see how the Ideal will perform in corn/beans. We tried a 2022 Ideal . It worked well in the corn but we had trouble in soybeans as we had terrible green stems that year. Our CNH machines had trouble with them too. We kept a JD 9650 cylinder/walker machine with real aggressive cylinder bars and it would run them.
We were all JD until four years ago. Our local dealership had been bought out several years before and we had just finally had enough troubles with the new ownership. We switched combines to CNH then an have Demoed CNH and AGCO planters and tractors since then. We planned to update two tractors this year but the low grain prices has move that back at least one season.
Thank you for your review and opinions on the equipment you run.
Good information - I had wondered why you changed the concaves without any use on new parts but I know how fast and easy a task is done, the more likely it will be. Good video - keep up the good work.
There are examples of appropriately sized grain carts towed by the combine harvester (harvesting dried down corn for grain). The combine towed grain cart is filled by the combine's unloading auger straight behind. The grain cart has its own engine, examples usually have the grain cart's auger out to the left. If the combine cuts up and down on one side of the corn stand, the cart auger could be swapped to the right side of the towed grain cart. Similar is done in Western Australia with wheat etc harvesting on tramlines. In WA, the cart tractor to follow directly behind the combine harvester, the tractor has an auger from front to rear over the top of the tractor to fill the grain cart. (CTF controlled traffic farming)
What a great video. With your Dad having 60+ years running a combine it was really interesting to listen to his stories!!
CaseIH did work on a dual side unload at one time. it was a center auger that would swing out to either side. First thought was in the front of the grain tank but that made the auger too high and put limits on grain tank size and extensions. Second thought was at the rear of the tank but limited the operators view of the auger along with having the auger sticking out the back of the combine for miles as well as made accessing the engine compartment difficult.
It requires a clean sheet look at combine design to implement a layout that would be functional. If anyone else remembers, the ideal was touted as a clean sheet design, but other than massively long rotors it's hard to say they really diverged from what was the well trod path of legacy designs. Probably difficult to get something different to pass a board meeting in a big company, but my hats off to anyone who still believes real innovation is worth pursuing and keeps trying anyhow. We need that more than ever
It’s so hard to tell just how big the machines on video. I usually gauge the height by you standing next to the track. You said the width of a dual is 17-18 feet, so I measured it out in my house. I live in mountains in PA, mostly Amish farms(who use actual horse power) or smaller farms with combines half the size. Idk how they keep from rolling on the hillsides they run here. If you look up Lycoming County PA, you’ll see mountain farming
Very valuable and informative video. Thank you Browns.
Great Video the Brown Family, My comment would be that Gleaners have always been odd combines, claas are high capacity and reliable, the Ideal is a new combine and you guys have had a attractive deal, thanks for sharing
That's a really good synopsis of the first run with the combine. Given your labor situation, I think you did the right thing going with bigger capacity over 2 machines, especially with planting behind the combine, and having at least one hauling the grain away from the combine. The tracks will pay you back for years to come, less compaction. Great video!
That was an interesting video gents, thank you for your openness and honest opinion.
Thanks for the honest review! Not many farm youtube channels do that.
No problem!
Very good video. I really enjoyed you and your Dad explaining this combine.
Always good to see Mr. Bob and very informative Brian I feel yalls pain with the dryness we had so much rain the first half of the year and now we can't beg for any in east texas.
Great to hear both side unloading suggestion, been advocating for that ever since the Versatile pull type Trans axle 2000 had it in the mid 80s!
Thanks for taking the time to answer questions about your new combine . 😊
Loved hearing Mr. Bob's opinions on the combine. Hate that yall are having such a tough year with the fall crops.
Took out a x9 1000, an ideal 8 this past weekend on demo. Both great combines with definitely the best hopper samples I've seen in any machines. Both very user friendly and very comfortable to operate
Not afraid to own either but I an leaning on the fendt. Really a sweet machine
We are happy so far. Good to hear how it compares to an x9 as I have never ran a Deere combine
Pros to the fendt to me was the cooling system setup
The full length rotors/ gearbox location
The bottom feeding cone setup cause wrapping on our current red combines can be a problem.
Visibility in the cab
Deere pros was the giant feederhouse, it has to be a beast in canola, and I get not everyone deals with that weed
The corner post display, I still like my basics in one place
The seat was more comfortable and the massager in there, not too shabby but when I plug the fendt up I likely won't be suffering back pain LoL
The sample of both the combines was seed quality which I found unbelievable
I could actually go on for quite a while
The first self-propelled combine on our farm was a Gleaner E just like Bob back in the 70's. The biggest Gleaner we ever had was an M2. My brother now runs Case IH.
Love to hear from Dad.
Ah man that Gleaner was the reason I subbed to this channel Brian man . That sure sucks about your dealer . Bring back the Gleaner ‼️
I had some wheat damaged by 2 late freezes 2 nights in a row one year and it had LOTS of black dust (and almost a total loss in South Carolina)
always great watching your video's! Great interview with your father, i find a ton of value in his opinion.
Great video! Enjoyed your conversation.
Glad you enjoyed it!
Thanks for the excellent presentation about the Ideal combine.
The sensitivity of the steering joystick should progressively decrease with increasing groundspeed.
Great job on the video, thumbs up for having you dad in the video
Thanks 👍
Real good video,, sucks with all the dry and hot weather, same here in central jersey,, good luck with the combine going forward 👍
Like the difference between a zero turn mower and a regular mower. The response is instant, no slack in steering like a steering wheel. Once you get use to it you don't go back.
Those Ideal's look so sick. Super happy you guys have enjoyed yours so far. Can't wait for corn!
Hopefully it doesn't fail like most of them.
@@demoking681 "Most?" What are the failure rates of the Ideals?
@208SledHead at the dealership I work at, we can't keep them on a farm. They get rid of them after 1 season. The fendt can't get a clean sample. When fendt figures them out, they will be an amazing machine, they are just not there yet. Great on small grains.
We put an AWS air bar onto our Mac Don for beans, it does make a difference in short beans
There’s a bigger sheer bolt for that beater we put them on our 10ts. We also run the 750 rears on our 10ts aswell nice floatation in wet
Have you been able to get the 750s to turn tight enough. That’s what I have and would like to try and tighten up the headlands
@@jd7461 I can turn on 2 headlands with 2 45ft outside rounds.
I remember a combine with the dual sided unloaded being tested in our wheat . I was 10 yrs old I think. Versatile 2000 pull type . It ran circles around our L2 till they cooked the engine on their tractor 😅
Great show. Hope you could do more sit downs like this in the future. A after harvest review would be cool.
Saw quite a few Fendt combines out west (US2 from west coast to MInnesota) but there are very few, as in none in my area of WC Indiana. Geringhoff heads have become very popular around here, in fact the local CIH dealer is selling them. The nearest AGCO dealer is 70 miles away, so that makes service calls challenging. Probably 60% green, 35% red and a few yellow machines around here. Very enjoyable discussion, thank you.
Thanks for watching
Never driven one but I would assume the tracks increase the turning radius as well. A lot more ground contact but better ride I would think.
Pop knows his stuff! (You kids too, of course!)
Very good video Brian and Bob one question in old days farmers left the unload auger out all the time in the field now it’s folded in is it because of weight
Great video Brian. Very informative. I actually learned a lot thanks so much.
It's like "Workin Words"!!! I really enjoyed your podcast and would love to hear more.
Your father is so hard to understand in the videos but I really like to hear what he has to say.
Harvest is over? Oh my. I thought there was potentially going to be another video. Bummer. Fun to watch. Glad to see all went well
Wheat harvest. Wait a few weeks and they'll be running corn and beans.
G,day Brian and Dad from Sydney Australia. Nice looking combine.
Blessings of sunlight upon you both, as we share the one light.
🌏✝️
I was working in Idaho one year and they got 15-20" of rain on wheat, barely and down hay. The black mold was so bad the combines looked like they were on fire, the big balers looked like they were on fire, and I was miserable. Most of the malt barely sprouted and the brewers wouldn't take it.
Great video. Good to see all of your family not afraid to take a camera along.
The review was very interesting and honest. In my opinion. Was surprisingly surprised about liking the Joystick.
I figured dad would be hard to get used to. 😊
Old gays can learn new tricks 😂
Equipment operators adapt quickly.
Bob is a good operator.
Bob has been running joysticks for years in the cat and excavator
Enjoy your videos very much. My family visited Ruby Falls in Chattanooga TN last week and saw a picture on their wall of a Bill and Bessie Marlow in the 1940’s. It was donated by Nancy Marlow Brown of Chillicothe. I took a picture of this if this is part of your family
don't thing so.
Biggest problem with going from 2 machines to one is when you want to run two different crops.. otherwise it's nice just have one machine and an extra guy to do all the other stuff and hual a few loads.
Great video! Thanks for taking the time.
Thanks for watching!
Thanks Brian.
your going to have to get different sieves for small grain also. Cant do.decent job with corn seives
Ease of Maintenance: The machine's design simplifies maintenance, with features like the Copperhead concaves that streamline crop transitions.
😍😍😍
Yes always wear your seat belt. My cousin was thrown from a combine crossing a highway. got hit by a semi truck. Broke both legs and an arm. He lives to tell the tale. He wont drive a pickup now without a seat belt now.
Hopefully you'll get rain when needed and dry when needed. God Bless.
Good show,yall need do on on the oxbo sprayer,I remember seeing Bob on the nitro when trucking through chilly coffee Ohio
talking about the powel ladder thats cool but i think Claas were very smart with their,ladder being portable you can use on several locations,for,servicing,or repairing.
this combine has the same kind of ladder to the engine compartment.
With long enough auger you can unload having it turned back, just get the tractor right behind the head and turn the auger over the wagon.
At least with Claas you can.
There is shims at the back if you take out it will steer shorter. look in your book it shows what can be done.
I believe we are adjusted as far as we can with the wheel we have
@@BriansFarmingVideos I wonder if it is the ideal drive that slow down the steering. We went from a 770 TT to a 10T whit steering wheel and 900 mm tracks and 750 rear wheels. The 10T steering is way faster and twitchy than the old 770 making it easier to turn on the headland.
Enjoyed the talk. Dang! I think you're caught up!😊
Once again you guys give very good reviews. Cut to the chase and you don't just talk about cup holders. I was very interested to know on what year they did upgrade the rear impellers in the back of the combine. I am wondering if the aftermarket impeller upgrades on the 22 and older ones actually worked right. And the meantime if I ever buy a Fendt ideal combine it won't be anything older than a 2023. I think if you're not combining a lentils or canola I think the combine's going to serve you well
Thanks for the update
You bet
Yeah for fuel consumption you have to look at acres per gallon, not gallons per hour.
Did I hear right. There's a second combine on its way? Just like you, I would be concerned about my dealership making BIG changes. Here in Indiana it's been a nightmare. No matter what anyone says, service and sales controlled by a headquarters located in another state matters. Poor support for the communities, (FFA and 4H and county fairs) and pricing and customer satisfaction is less a concern for the company. Bob, you'll remember back in 1974-75, we had a black dust on our wheat. Came in looking like a coal miner. (i was combining with a Gleaner E 3).
I think if the machine will be down a certain amount of hours, a loaner will be provided.
I reme,ber in 2001 I went from 2 to 1 combine because of labor I became more efficient w. When I ran 2 a lot of ti,especially one broke both stopped to fix it
Brian, the joystick sensitivity is adjustable, don't know if you can do it yourself or if fendt does it, but I'm positive it can be done.
It's not
If you go on the Fendt configurator web page today, an Ideal 9 is 850k, and 980k with 36 inch tracks. But again, thats MSRP :)
thank you
GOOD JOB VERY INTERESTING
Thanks. I enjoyed and learned
Glad to hear it!
heard down in alabama they are running corn and tenn - same stuff - corn is burnt up , indiana has some drought damage also
Great video. thank you
You are welcome!
How is George? Please say hello to George. We miss him.
Great review. Greetings from Dundalk, Ireland.
That's crazy machine but 50hrs a cut seems like you could run that beast 50 times that hrs if you had the acres. Like a space ship wow.
Dude what do you miss!!! “POWER LADDER!!! “””
Thank you BFV!
Well done lots of good information
Can you flip the rears for a wider offset and adjust the stops for tighter turning ?
It’s one of those years. Browns have it too dry and Larsons have it too wet.
Thanks
I like these one on ones with your dad
thanks for the video .
They already had a prototype 50ft dyna flex head on a Gleaner with a swivel auger like they got that was folding. Agco wouldn't allow engineering to test strength of auger , just the header. Since all they care about is developing crap for fendt. They only spend a million or so on improving Gleaner a year but 5 to 10 or more times that improving fendt. Should of stayed with Gleaner, they can run 5000 bushel an hour. Someone out in Kansas is doing it with 16 row head on it. For the flat ground you guys run, it would do it there too. Less parts, less weight, easier to service, easier to set, and a lot cheaper to run with the Gleaner. T1 series has some nice updates that im not going to say other than it has transmission and finals of ideal 7. If they can hold up on that overweight turd, they'll last forever on a Gleaner. Dynamite comes in small packages but gives big results.
Nicely said: I agree
Does it have an adjustable rear tire width? If so, you could increase the spread and then adjust the turn stops for a tighter turn radius.
I was able to understand a lot of what they said.
Ours wheat was dusty as well east central il, kinda like you dry didn't make sense
Combine would be extra Comfy and Look even better with tinted windows 👌👌👌
Is this a first-meaning suggestion? If so, you have no idea about agriculture. Farmers are not posers. And good visibility is extremely important, especially in a combine harvester. The windows are already dirty enough through the dust and you want to tint them? That can only be a joke.
@@gerhardma4297 keep the sun out of the Cab a bit and because it’s black that’s all.
You guys praying for rain.We can't get it to stop.(south-west Ontario.)
Been missing your videos. Fendt is nice. How is new grain bin project working out?