We recently lumbered a 36" maple, a 36" white ash, and a 32" pecan. After drying, we tried planing with a Rigid (Home Depot) 13" planer with 2 HSS knives th-cam.com/users/postUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL . This job was clearly too much for that machine. The pecan was particularly difficult, due to heavy mineral deposits, and a sharp pair of HSS knives would be consumed by a mere 3 boards. We were also having lots of problems from chip bruising, due to poor dust collection. The shavings came off like straw and jammed in the 4" hose.We bought the DW735 simply to be able to run carbide blades, which worked brilliantly for the pecan. However, we found it to be a much, MUCH nicer machine. It was far more rigid than the "Rigid" planer, and far more accurate as well. But what I liked most about it was the dust feed. This machine has its own blower, which shreds the "straw" like shavings as they come off the cutting head and helps boost the shavings into the dust collection system. No more clogs! It's also nicely sealed so that the internals stay quite clean. This is just a well tempered machine that's a delight to use. It literally cut the labor in half. Just another example of getting what you pay for.
Simply the video to watch before buying any wood working tools. I wish this video came with every tool to show how to use them! Superb again. I love all the Wood Magazine videos. All presenters are brilliant. Thank you.
I have a version of the Craftsman Router that you show in the video and must say it is EXCELLENT ! Mine has the above the table height adjustment feature for use in a router table . Have had it for a couple years and enjoy using it, It can be found on sale at times and is one of the best values going. I also have porter cable, dewalt and hitachi and freud routers and my craftsman is usually my go too.
Kudos to the Carpenter and Woodworkink magazine. My biggest pet peeve is addressed after A few years of this channel the table saw height/depth of cut We finally have proper instrutorinstructio4:77 seconds ;:;:;;:; clearly states the blad we should be set 1/4 above the work piece. This seperatesvthr classcally train CrFtd from the self taught actors. I've seen a treasure trove of streaming blade a few inches above the piece gives me here bee Gee bees until I can face the
I hope all newbies and seasoned pros alike give this consideration. I actually take the time to lower the blade until It only pierces enough to make the proper Cut
Excellent channel! I’ve owned a mitre saw for years. I’t’s my goto for sizing boards. But you’ve shown me things here I never took the time to understand (The hold-downs). Anyway, appreciate your excellent videos and time spent to serve them to us.
fantastic video sir! so much information on machines to buy, also how to use them and most important how to used them with safety. I wish for more videos like yours. thank you:)
question about your Craftsman Spindle sander. I am going to assume (I hate doing that) that the drum with the paper is reversible so you can use the entire length of paper. If not, how do you compensate for half of the drum being wasted?
Right out of the box you take the safety guards off the table saw and make a cut. That was one very very "stupid" move. Safety guards are suppose to be used not thrown in the trash.
I would not use a drill press with the amount of wobble yours had in this video. I wold secure it. If yours is on wheels, I would think you wold have lowered them so the drill press rested on its own base.
The subjects covered in this woodworking website t.co/z6o0f8z2H4 varies from wood types to tool types and uses. A few other subjects range from the various kinds of wood along with their distinct levels of difficulty when it comes to managing them. If you are still a beginner in wood working, then you will find this book very beneficial.
We recently lumbered a 36" maple, a 36" white ash, and a 32" pecan. After drying, we tried planing with a Rigid (Home Depot) 13" planer with 2 HSS knives th-cam.com/users/postUgkxIzvvTi3_Qc8JnVdYYRJCvuoDC4QjTzeL . This job was clearly too much for that machine. The pecan was particularly difficult, due to heavy mineral deposits, and a sharp pair of HSS knives would be consumed by a mere 3 boards. We were also having lots of problems from chip bruising, due to poor dust collection. The shavings came off like straw and jammed in the 4" hose.We bought the DW735 simply to be able to run carbide blades, which worked brilliantly for the pecan. However, we found it to be a much, MUCH nicer machine. It was far more rigid than the "Rigid" planer, and far more accurate as well. But what I liked most about it was the dust feed. This machine has its own blower, which shreds the "straw" like shavings as they come off the cutting head and helps boost the shavings into the dust collection system. No more clogs! It's also nicely sealed so that the internals stay quite clean. This is just a well tempered machine that's a delight to use. It literally cut the labor in half. Just another example of getting what you pay for.
Simply the video to watch before buying any wood working tools. I wish this video came with every tool to show how to use them! Superb again. I love all the Wood Magazine videos. All presenters are brilliant. Thank you.
1:05 Mobile Bases
1:27 Table Saw
8:52 Band Saw
13:41 Miter Saw
19:27 Jointer
23:19 (Thickness) Planer
25:45 Drill Press
37:35 Belt Sander
40:14 Disk Sander
41:55 Oscillating Spindle Sander
43:53 (Fixed Base) Router
45:05 Plunge Router
47:04 Router Bits
48:56 Router Table
52:00 Router Combination Kit
52:43 Lathe
1:04:18 Grinder
1:05:02 Scroll Saw
1:09:06 Dust Collection
Thanks, helping me finish schoolwork fast
I have a version of the Craftsman Router that you show in the video and must say it is EXCELLENT ! Mine has the above the table height adjustment feature for use in a router table . Have had it for a couple years and enjoy using it, It can be found on sale at times and is one of the best values going. I also have porter cable, dewalt and hitachi and freud routers and my craftsman is usually my go too.
Thank you sir for your time ! Excellent video, detailed and enjoyable!
Kudos to the Carpenter and Woodworkink magazine.
My biggest pet peeve is addressed after
A few years of this channel the table saw height/depth of cut We finally have proper instrutorinstructio4:77 seconds ;:;:;;:; clearly states the blad we should be set 1/4 above the work piece. This seperatesvthr classcally train CrFtd from the self taught actors. I've seen a treasure trove of streaming blade a few inches above the piece gives me here bee Gee bees until I can face the
I hope all newbies and seasoned pros alike give this consideration. I actually take the time to lower the blade until
It only pierces enough to make the proper Cut
Tske the time to watch as many of Wood magazines instructions. They are the real deal.
Excellent channel! I’ve owned a mitre saw for years. I’t’s my goto for sizing boards. But you’ve shown me things here I never took the time to understand (The hold-downs). Anyway, appreciate your excellent videos and time spent to serve them to us.
Awesome video to understand how to use all of these woodworking tools.
There is a lot experience and knowledge for all the good instructions jv
Nice video! I'd add the importance of safety glasses too
Many thanks for your great effort It's a really helpful for learners. Great love form Bangladesh..
Thanks for posting a very informative and educational video !!
This class is interesting for my exam thanks
fantastic video sir! so much information on machines to buy, also how to use them and most important how to used them with safety. I wish for more videos like yours. thank you:)
i have learned a lot from you sir thank you
Very nice information about wood working mechinaries
This video deserves more likes...
you are a GREAT teacher!!!
Great video, lots of useful info.
excellent detailed video sir helps a lot .
Thank you so much for this video!
really helped. I was having a test
Great video. Very descriptive! I’ll be sure to subscribe.
Wow this is really helpful but please where can someone outside your country can order for all the tools
The voice at ~25:15 sounds like the Wood Whisperer, Mark Spagnoulo
When I do a large piece on the lathe, I knock the corners of using either my table saw or band saw.
Thank you. I learnt a lot
great video sir! All the stuff I need for starting! thanks
question about your Craftsman Spindle sander. I am going to assume (I hate doing that) that the drum with the paper is reversible so you can use the entire length of paper. If not, how do you compensate for half of the drum being wasted?
Great vid! Lots of basic skills covered.
Mom 9years
Should have mentioned about cleaning the paper on the belt sander, disk sander, and spindle sander in order to prolong the life of the paper.
Just a quick point - it appears that your website is not accessible from the UK for some reason. Is there a particular reason for that?
Excellent
great video... love from malaysia
Blade drift on a bandsaw shouldn't be controlled by adjusting the fence, adjust the position of the blade on the wheel. Otherwise, good video.
Unless the bandsaw is a Shopsmith bandsaw, which doesn’t have a wheel tilt adjustment.
Knock the corners off at the table saw, that makes it easier to turn.
THANK YOU
Hi. What's the name of the clamp you used on the mitre saw?
@@Wood thanks
should tell.about snipe on thickness planer and ways to address it
❤ how much is it?
Excellent instructional video. But showing its age with the lack of eye or hearing protection when sawing, drilling etc.
Great
Right out of the box you take the safety guards off the table saw and make a cut. That was one very very "stupid" move. Safety guards are suppose to be used not thrown in the trash.
I would not use a drill press with the amount of wobble yours had in this video. I wold secure it. If yours is on wheels, I would think you wold have lowered them so the drill press rested on its own base.
That drill press looks like one could thip it over using one baby finger.
The subjects covered in this woodworking website t.co/z6o0f8z2H4 varies from wood types to tool types and uses. A few other subjects range from the various kinds of wood along with their distinct levels of difficulty when it comes to managing them. If you are still a beginner in wood working, then you will find this book very beneficial.
Hi
Ik
It’s a shame they are not common all over the world until human intervention
15 advertisements in this video
Hi
Joy maha laxmi