This was a great help, thanks!! Just want to add a helpful tip: When you insert the small end of the spring into the cover make sure it goes all the way in. The metal arm should be flush against the cover. If the spring arm isn't flush you can still get the cover back on but it doesn't operate correctly.
Excellent comment! If that short end isn’t pushed all the way into the alignment hole, you are going to have issues. The spring wire sits flush to the cover when it’s inserted all the way.
I don’t exactly have the same type of dishwasher but this really helped me!! Couldn’t close the dishwasher dispenser for over 6 months (not sure how clean my dishes turned out during this time) but after watching this video I managed to fix it in under two minutes. Thank you!
What a lifesaver!!! I am so grateful that this demonstration was posted. It saved me time and money as all that was needed was to simply put the spring back into place. Thanks for sharing! :D
Straight forward, as he showed and explained. Opens. I dont know about what others are talking about with the open button needing to have the spring to push off of. Thank u for this. My washer is 2021 model. The big one
Thanks, the seal on our door had come loose. I called Whirlpool, talked to one person who passed me off to a number no one would answer, while listening to music on hold I searched on TH-cam and found your video. Thank yo so much on all the spring was what I did not know how to put back until I watched your video!!!!!:)
Thanks much! My gasket came loose and you vid was a lifesaver/money saver. As another responder stated, make sure the short arm of the spring needs to be completely inserted into the smaller hole within the door small hole and must sit flush with the gasket or else the door won't open properly
God bless you!! 😊 I've been needing to fix this for months. It's been so annoying having dirty dishes! I looked everywhere for a video. Thank you so much for showing this!!
Thanks Worked out great .. Didn't realize the soap door was removable! ... Found my gasket was completely out and jammed inside ... Lined it up and pushed it under the tiny retainer tabs with a jewelers screw driver ... just like new! Put the spring back in and works like a charm! .. Almost ordered the entire soap dispenser replace was almost $80 .. glad I checked youtube and found your video!
Thanks for this. One thing to note is that inside the hole that holds the spring arm on the sliding dispenser door there is another smaller hole. You need to press the spring arm into this smaller hole for it to work properly. The spring should stay in place on the sliding dispenser door while you insert it on the main door without having to hold it. The dispenser door won't fully slide open if you don't do this.
I appreciate this video and your patience in dealing with a little spring that is a PITA to load on this little plastic piece. I had NO idea how this was going to go in, but you helped me out. THANKS!
Just what I needed. My gasket came loose and I didn’t put the spring back properly after reassembly, so the door wouldn’t open during cleaning. Thank you for this!
Thank you so much. I thought I was going to have a large repair bill. I haven't run it thru a cycle yet, but with your help, it looks like I've fixed it myself.
BINGO! This was making crazy for weeks and it seemed like an easy fix. I just didn’t want to risk breaking it. Thanks so much. You’ve saved me SO much headache getting the spring back in place in 5 seconds flat
You are so wonderful! Thank you so much for posting this demonstration. I saved me so much time and money and it was easy to do once shown. Please know your time and demonstrations add value and are greatly appreciated!
Very good video. I was able to fix mine finally after watching this, but, had to make one modification that others may need to do. So I found that after I got the spring back into place, it would keep popping out after I opened and closed the tray to test it. So I quickly figured out that all I had to do was bend the spring at both ends inward toward their respective holes that the ends go into just a bit so it stays in place and it worked! Very happy!
Man I'm having the same problem. Be grateful for for some more explanation about how you solved this. Works great until I shut all the way and then I'm getting caught up on the inner tab and then won't open without force
Thank you so much. I could not believe I found so easy this video. I had the rubber gasket out for 2 years. I did not know how to take out the door. So easy video to follow. One thing, it took me no time to put it back, even the spring. It took me a second. Much more faster that in the video :)
Thank you. In our situation, the little peg on the inside under side next to the rubber cover handle, broke in two. Unbelievable how expensive the one little piece is to purchase. But at least I saved big on not having to call a service guy cuz of your video. Thanks!
Thanks for posting this! All the other searches were for replacing the very expensive and cheap, flimsy assembly, which involves taking the door apart. I wouldn't have known how to open the hatch.
You are a lifesaver, my friend. Thank you. We have an LG, rather than a Whirlpool, and the long end of the spring is differerent, but your essential principles kept me going ... finally it clicked. Blessings.
I wish I had found this video sooner- my gasket was hanging out for over a year. I called Whirlpool, who were only too happy to send out a repair man at considerable expense. They could not give me a tip on how to fix it myself. So easy if you know what you’re doing. Once I took off the lid, the spring came out so I needed that help too.Thank you!!
I'm convinced that for the 2 years I've owned the dishwasher that the gasket was never in there properly and sometimes I had to try 20 times to close the lid before starting the load. In desperation, I popped the lid off, not knowing if it was supposed to be able to come off (!) and then didn't know how to get the spring back in. Thanks for the helpful video that showed me I hadn't broken anything. I'm subscribing.
THANK YOU for making this video, I just spent an hour trying to find a video that fixed my problem, and I just kept getting videos on installing it, but nothing that was showing me how to put the spring back in! I’m glad I found your video!
Thanks, it worked, make sure you fully press the short end of the pin into the hole, otherwise you may have trouble opening the draw when pressing the open button
Thank you!!!! You saved me from having a meltdown lol. Great video, could see everything you did. Other videos did not allow me to see the spring, etc.
Great video, but where can I buy the spring? It looks like it whirlpool only sells the complete detergent dispenser (not individual springs), but I only need to replace the spring which has disappeared. Any suggestions greatly appreciated.
There is a free one in a floor model at your local appliances store. Sure thing they can fix it under warranty after charging other socer-moms $75 for a piece of plastic.
Thanks, I filed the claim, warranty expires in 1 month then I saw your video and I fixed the door. Should I still bring service man to replace the dispenser door? Is this gonna happen more frequently now?
The only problem here is, you don’t put the short end of spring in that hole. You place it in the back of the channel to the area left of small hole. This allows the “open” button to actually push up on wire to open it properly. If you place wire in hole, this does give the feel that it is working but catches wire on that moving part under lid when you try to open and you have to start all over again.
This. The arm of the spring needs to go on the underside lever of the open button. Otherwise, the open button has nothing to keep it lifted. I tried both ends of the springs in the holes, and while the lid would latch - it wouldn't spring open when the button was pushed.
Excellent video and it was a very easy fix. The comment below about the spring and the small end being in all the way and flush was critical info. Thanks Everyone!!!
This was a great help, thanks!! Just want to add a helpful tip: When you insert the small end of the spring into the cover make sure it goes all the way in. The metal arm should be flush against the cover. If the spring arm isn't flush you can still get the cover back on but it doesn't operate correctly.
Thanks for the info!
I couldn’t get it to open up when pressing the open button until I read your comment. Thank you!!
Excellent comment! If that short end isn’t pushed all the way into the alignment hole, you are going to have issues. The spring wire sits flush to the cover when it’s inserted all the way.
Your "small tip" was a life saver! Thank you so much!
Thanks so much for the tip, that was exactly the problem I was having
Thanks so much. I’ve been having a problem with the detergent dispenser for a month and would never have figured it out without this video!!
I don’t exactly have the same type of dishwasher but this really helped me!! Couldn’t close the dishwasher dispenser for over 6 months (not sure how clean my dishes turned out during this time) but after watching this video I managed to fix it in under two minutes. Thank you!
I asked and you provided 2 years later!!! Thank you so much!!!
you're welcome! Can you subscribe to my channel? I will really appreciate it!
Excellent video. I popped my dispenser cover off accidentally, and couldn't figure out how to reattach it. This info was priceless.
What a lifesaver!!! I am so grateful that this demonstration was posted. It saved me time and money as all that was needed was to simply put the spring back into place. Thanks for sharing! :D
Glad it helped!
Straight forward, as he showed and explained. Opens. I dont know about what others are talking about with the open button needing to have the spring to push off of.
Thank u for this. My washer is 2021 model. The big one
@gregk2043 you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Thanks, the seal on our door had come loose. I called Whirlpool, talked to one person who passed me off to a number no one would answer, while listening to music on hold I searched on TH-cam and found your video. Thank yo so much on all the spring was what I did not know how to put back until I watched your video!!!!!:)
Thanks much! My gasket came loose and you vid was a lifesaver/money saver. As another responder stated, make sure the short arm of the spring needs to be completely inserted into the smaller hole within the door small hole and must sit flush with the gasket or else the door won't open properly
You’re welcome! Can you subscribe to my channel please? I will really appreciate it.
God bless you!! 😊 I've been needing to fix this for months. It's been so annoying having dirty dishes! I looked everywhere for a video. Thank you so much for showing this!!
@melissanolan2972 you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
This kind of thing in the past might have cost me a new dishwasher (wife). I ordered the unit and fixed the sliding door. Big thanks!
@billyhellmaker you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Thanks Worked out great .. Didn't realize the soap door was removable! ... Found my gasket was completely out and jammed inside ... Lined it up and pushed it under the tiny retainer tabs with a jewelers screw driver ... just like new! Put the spring back in and works like a charm! .. Almost ordered the entire soap dispenser replace was almost $80 .. glad I checked youtube and found your video!
you're welcome
I have a family of 5 and a mountain of dishes. Then the spring came off. This video saved a ton of time. All fixed! Thank you!!
Glad it helped!
Thanks for this. One thing to note is that inside the hole that holds the spring arm on the sliding dispenser door there is another smaller hole. You need to press the spring arm into this smaller hole for it to work properly. The spring should stay in place on the sliding dispenser door while you insert it on the main door without having to hold it. The dispenser door won't fully slide open if you don't do this.
@bg2xbass you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
I appreciate this video and your patience in dealing with a little spring that is a PITA to load on this little plastic piece. I had NO idea how this was going to go in, but you helped me out. THANKS!
@thesilverballpodcast you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Dear DIY Pinto, Thanks for posting this video demonstration! It was a big help and saved me from hand washing a big load of dishes this evening.
You're welcome!
Thank you! My gasket was messed up, I took it apart, and was dreading figuring out how to line up that spring. Saved me probably a ton of time!
you're welcome! Can you subscribe to my channel? I will really appreciate it!
Can't believe this vid was on here, but thought I'd take a shot. Thanks so much man, fixed it!
You’re welcome!
Just what I needed. My gasket came loose and I didn’t put the spring back properly after reassembly, so the door wouldn’t open during cleaning. Thank you for this!
@ryanshanahan6304 you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Fixed it in 2 seconds with your video! ...after being on hold with KitchenAid for an hour. You Rock!
Perfect! thank you for watching
Can you subscribe to my channel? I will really appreciate it!
Thank you so much. I thought I was going to have a large repair bill. I haven't run it thru a cycle yet, but with your help, it looks like I've fixed it myself.
You’re welcome Jere !
Genius! Thank you so much! Dispenser broke 1 day before family coming over, fixed now! I appreciate you!
Glad I could help!
Can you subscribe to my channel? I will really appreciate it!
BINGO! This was making crazy for weeks and it seemed like an easy fix. I just didn’t want to risk breaking it. Thanks so much. You’ve saved me SO much headache getting the spring back in place in 5 seconds flat
you're welcome! Can you subscribe to my channel? I will really appreciate it!
I did mine in 4.99 seconds 😉🤣😂
One week into owning this dishwasher and the spring was out of place. Thank you for this video!
you're welcome! Can you subscribe to my channel? I will really appreciate it!
You are so wonderful! Thank you so much for posting this demonstration. I saved me so much time and money and it was easy to do once shown. Please know your time and demonstrations add value and are greatly appreciated!
@user-sf4ti9ip2e you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
So thankful for you breakdown, I got the door off and the spring shot out and I had no idea how it went
@terminatorgir you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Fantastic video don't think I spent more than 15 minutes to replace the gasket and re-install.
Thanks much!!
Was ready to buy a new one was watching videos on how to install it then I found your video fixed it perfectly Thanks
Glad I could help
This was a truly authentic video and I value you demonstrating trial and error!
Very good video. I was able to fix mine finally after watching this, but, had to make one modification that others may need to do. So I found that after I got the spring back into place, it would keep popping out after I opened and closed the tray to test it. So I quickly figured out that all I had to do was bend the spring at both ends inward toward their respective holes that the ends go into just a bit so it stays in place and it worked! Very happy!
thanks for sharing
Man I'm having the same problem. Be grateful for for some more explanation about how you solved this. Works great until I shut all the way and then I'm getting caught up on the inner tab and then won't open without force
Thank you so much. I could not believe I found so easy this video. I had the rubber gasket out for 2 years. I did not know how to take out the door. So easy video to follow. One thing, it took me no time to put it back, even the spring. It took me a second. Much more faster that in the video :)
Glad it helped
Can you subscribe to my channel? I will really appreciate it!
Thank you for posting this video- You just saved me a lot of money with this simple spring fix! Thank you for sharing!!
@JudyRahn-dy9ow you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Thank you. In our situation, the little peg on the inside under side next to the rubber cover handle, broke in two. Unbelievable how expensive the one little piece is to purchase. But at least I saved big on not having to call a service guy cuz of your video. Thanks!
You're welcome!! Can you please subscribe to my channel?
Thanks for posting this! All the other searches were for replacing the very expensive and cheap, flimsy assembly, which involves taking the door apart. I wouldn't have known how to open the hatch.
You're welcome!
You are a lifesaver, my friend. Thank you. We have an LG, rather than a Whirlpool, and the long end of the spring is differerent, but your essential principles kept me going ... finally it clicked. Blessings.
You're welcome!
Lifesaver, has been struggling for weeks. Very easy fix! Thanks man
Thanks!! This was the instruction I needed to pull the cover off and fix the gasket.
@CptCrackers you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
I wish I had found this video sooner- my gasket was hanging out for over a year. I called Whirlpool, who were only too happy to send out a repair man at considerable expense. They could not give me a tip on how to fix it myself. So easy if you know what you’re doing. Once I took off the lid, the spring came out so I needed that help too.Thank you!!
you're welcome! Can you subscribe to my channel? I will really appreciate it!
I'm convinced that for the 2 years I've owned the dishwasher that the gasket was never in there properly and sometimes I had to try 20 times to close the lid before starting the load. In desperation, I popped the lid off, not knowing if it was supposed to be able to come off (!) and then didn't know how to get the spring back in. Thanks for the helpful video that showed me I hadn't broken anything. I'm subscribing.
Perfect! Saved me replacing the whole drawer. Thank you
I use you video at least every 2 months. Thanks 🙏 but it is a design problem. I’m just glad I can fix it with the parts.
you're welcome! Can you subscribe to my channel? I will really appreciate it!
This had been bugging me for so long! Literally a five minute fix job! Thank you!
you're welcome!
THANK YOU!!!!!!! I’ve been so frustrated for months over having a gasket sticking out of my lid & the lid not staying shut 🤬.
you're welcome! Can you subscribe to my channel? I will really appreciate it!
THANK YOU for making this video, I just spent an hour trying to find a video that fixed my problem, and I just kept getting videos on installing it, but nothing that was showing me how to put the spring back in! I’m glad I found your video!
@ginas.j.8034 you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Thank you. I did exactly what you said to reset the rubber gasket for the soap dispenser and it worked.
You're welcome!
Thanks, it worked, make sure you fully press the short end of the pin into the hole, otherwise you may have trouble opening the draw when pressing the open button
you're welcome! Can you subscribe to my channel? I will really appreciate it!
Thanks to your 3 year old video,
I fixed the my dispenser drawer 😃!
You’re welcome! Can you you please subscribe to my channel? I will appreciate it a lot!
This video saved me a fortune. Thank you so very much for explaining how to fix the door with the springs situated just right!
Glad it helped!
Can you subscribe to my channel? I will really appreciate it!
This video was exactly what I needed to fix my dishwasher. Thanks!
You're welcome! Have you subscribed to my channel yet?
Thank you!!!! You saved me from having a meltdown lol. Great video, could see everything you did. Other videos did not allow me to see the spring, etc.
you're welcome!
this was so helpful! worked on my frigidaire 18" dishwasher with a very similarly designed latchy spring situation. thank you!!
@amandarochelle1807 you're more than welcome!
Thanks for the how-to. Done....and done, thanks to your direction!!
You’re welcome
YOU ARE THE BEST! Thank you for the great video! Very helpful! I was able to fix my dishwasher!
finally fixed our dishwasher thanks to you! couldnt see the parts as they werent in the fram sometimes but got the job done
you're welcome! Can you subscribe to my channel? I will really appreciate it!
Dude. Exactly what I needed, thank you!! Also, when the spring went flying… I felt that 😂
you're welcome! Can you subscribe to my channel? I will really appreciate it!
Thank you for this video. Such a easy fix saved me money.
you're welcome! Can you subscribe to my channel? I will appreciate it.
Super helpful. I got this fixed in minutes with no cussing.
@sevengrapes too funny! lol.
Great video. Exactly what I needed. Took less then a minute to fix gasket.
Thanks a lot
Thank you! I saved myself a lot of time and money and feel so good about fixing it myself.
@lg3589 you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
THIS VIDEO, WAS VERY HELPFUL Thanks for sharing this important information!
@robertbenavidez7164 you're more than welcome!
Many thanks for the video, your instructions were very helpful!
Thanks a lot, exactly what was needed to fix my dishwasher.
Great video, but where can I buy the spring? It looks like it whirlpool only sells the complete detergent dispenser (not individual springs), but I only need to replace the spring which has disappeared. Any suggestions greatly appreciated.
@bikutoi I'm not sure.
Thank you I was able to put it back from the first time after watching you
you're welcome! Can you subscribe to my channel? I will really appreciate it!
Best vid on this. I could not figure out where the short end went. Thank you
You're welcome!
Can you subscribe to my channel? I will really appreciate it!
Lifesaver! Hopefully it works fine during the next wash! ☺️
This was just what I needed, thank you!
@Rabidsmiley665 you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Do you know where I can order one of these springs?
can anyone help-out with this question?
I couldn’t find just the spring
There is a free one in a floor model at your local appliances store. Sure thing they can fix it under warranty after charging other socer-moms $75 for a piece of plastic.
Thank you! Took me a couple minutes to fix it.
This was a humongous help! Thank you so much!
Glad it helped!
Thank you, I was going nuts trying to figure out what went where. 🤪🥴
This vid was a fantastic help and I really appreciate it! 🏆
You're welcome!
Thanks for the vid. Exactly what I needed to put the rubber seal back in place and reset the spring. 👍👍
You're welcome! Have you subscribed to my channel yet?
CUZ! This is exactly the video I needed! You’re the man!
@johndonnahue8486 you're more than welcome!
Thank you. I appreciate this tutorial. It is exactly what I needed
Glad it was helpful! Can you please subscribe to my channel?
I have the Kenmore Elite and it worked perfectly!! Thank you again!!!!!
You're welcome!
Can you subscribe to my channel? I will really appreciate it!
Thank you so much! Saved me lots of frustration
you’re welcome!
Can you subscribe to my channel? I will really appreciate it!
Thank you so much because of this video i saved someone bucks and did it myself. many thanks 😊
You're very welcome! Can you please subscribe to my channel? I will really appreciate it!
Thank you for posting this!!!! Easy fix with the help of your video.
You're welcome ! Have you checked out my other video?
Yesssss! Thank you for this information! I fixed it in 5 seconds!
Glad it helped!
I just fixed it according to your youtube.
Thanks.
Thanks, I filed the claim, warranty expires in 1 month then I saw your video and I fixed the door. Should I still bring service man to replace the dispenser door? Is this gonna happen more frequently now?
Thank you so much for this video, I had this exact issue and your video helped walk me through fixing it
Glad it helped
Thank you. Fixed it in 1 minute.
You're welcome ! Have you checked out my other video?
Thanks so much! Saved me a repair call.
This was extremely helpful. Thanks so much for posting this.
You're welcome! Have you seen my other videos?
Thanks for the Video! This saved me from call Whirlpool!
You're welcome! Can you please subscribe to my channel? I will really appreciate it!
Thanks! Simple video but helped me 100% thank you, sir
You're welcome!
Worked perfectly - thanks so much for your help!
You're welcome! Can you please subscribe to my channel? I will really appreciate it!
Outstanding DIY Pinto!
@sledgenail-it4269 thanks alot!
You’re a hero, thanks for the help
@davidsalas5751 you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Thanks! I just fixed my dispenser. Saved me from buying a new dishwasher, I'm sure.
You're welcome! Can you please subscribe to my channel? I will really appreciate it!
Thanks very much, very helpful and easy to follow.
Glad it was helpful!
The only problem here is, you don’t put the short end of spring in that hole. You place it in the back of the channel to the area left of small hole. This allows the “open” button to actually push up on wire to open it properly. If you place wire in hole, this does give the feel that it is working but catches wire on that moving part under lid when you try to open and you have to start all over again.
Agreed.
Also agree. If you put the short end of spring in hole, it will dislodge first time.
triple agree
Disagree. I've opened and closed mine about 10 times. This could change after I run a cycle, I guess, but it's working just fine right now.
This. The arm of the spring needs to go on the underside lever of the open button. Otherwise, the open button has nothing to keep it lifted.
I tried both ends of the springs in the holes, and while the lid would latch - it wouldn't spring open when the button was pushed.
Thanks for the video. Clear and easy to follow
Thank you I fixed mine right away God bless you
you're welcome! Can you subscribe to my channel? I will really appreciate it!
Thank you! I fixed my own dishwasher for the first time and saved myself a $150 service call. You are a dishwasher repair angel.
You're welcome ! Have you checked out my other video?
Thanks man! That detergent drawer was making me scratch my head! ^_^
You're welcome!
Excellent video and it was a very easy fix. The comment below about the spring and the small end being in all the way and flush was critical info. Thanks Everyone!!!
Thank you very much. This was an excellent video.
@ducttran8240 you're more than welcome!
Also, can you subscribe for more great content? I will really appreciate it!
Where can I find that a replacement spring?
@K.3PO people have been saying on amazon
SAVED THE DAY!!!! TY VERY MUCH!!!!!
@new2brew958 you're more than welcome!