ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Airless Spray Demo - Professional House Painter - Demo Homeowner paint spray rig
ฝัง
- เผยแพร่เมื่อ 14 ม.ค. 2024
- a basic beginners guide to airless spray painting In this video I am using a Vevor X6 as it comes out of the box to spray a wall. Tutorial and Demo.
if your interested in purchasing this Spray rig click on the link below will give me a little commission for doing so.
Coupon code VVMH5%OFF
SPRAY RIG From VEVOR DEAL s.vevor.com/bf...
50ft spray line and extra gun not a bad deal s.vevor.com/bf...
these spray lines and guns are meant for limited use home owner or contractor backup. not for commercial use.
DONT FORGET to use the coupon code to save an additional 5% this will make it cheaper than amazon. Coupon code VVMH5%OFF
AIrless Whip hose great for better control. amzn.to/41SlUK1
Spray line connector you need one of these to connect 2 lines together.
You will need all of the below to get the flat tip setup
Cone filter housing www.paintspray...
Thicker white washers www.paintspray...
Cone filter buy several www.paintspray...
flat tip housing Yea I rip the plastic part off. NOT OSHA approved!!!! www.paintspray...
flat tips. I would get 5-15 4-13 5-17 3-13 for beginners. if your a better spray man 6-17 or even bigger but not for the Vevor spray unit stay small
www.paintspray...
Mike I appreciate your no frills, get the job done and take reality into consideration while doing so... not many like you out there buddy. Keep it up.
Great video. Thank you
Love your content maestro. I absolutely love to paint. There's nothing quite like it. Nothing comes close.
I ordered one of this a few days ago, today I used it for a job, sprayed trim and popcorn ceilings with it, it works great, I used Graco Nozzle and tips, I dont know how long will this machine last but I made good money already with it
yea should last a while. and you could literally buy 3 of them for the price of a similar graco unit. Cant go wrong.
Mike I love that boom truck in the back
Nice tip ( pun intended) about letting the pressure out of the line when switching from spray to prime and prime to spray . As a X5 user when I first got started and could only afford the x5 i went through 2 of them before I purchased a 595 . But the day I did not let the pressure out of the line first and just flipped it was the day it messed up and would no longer stop priming when I’d flip back to spray . Seen it happen to 2 other guys who used x5’s the same day they flipped it without relieving the pressure . You should do it to that one and see if it survives . I’d bet the farm it does not
It is a rule of spraying for ANY rig to take the pressure off the line before switching. Every rig will blow out the prime spray valve when you dont remove the pressure. None of them will last.
@@Mikefngarage agreed …. It’s crazy though I see guys flip that thing back and forth all the time though, with 2,000 + psi in the line . I seen one guy who was pretty experienced squeeze the trigger first and while holding it down flips in and out of prime without turning it off . Wonder if that’s still bad
@@New-Breed-Drywall-And-Paint yea all that is bad. always no pressure rig off then flip. prime spray valve will last almost forever. Most people never read the manual. I did it too. but my buddy told me never do that. then I stopped and never changed another valve.
My first rig I bought for myself was the Krause and Becker from Harbor freight and it was like $240 plus I had a 20% off coupon, that thing made me thousands of dollars before it stopped working. I did throw the gun and hose away and upgraded it to Graco hose and gun though. I have a Titan Xi 345 now I picked up for $50 because the guy couldn't figure out was wrong with it. Shit I fixed it up in a day and now she's my money maker .
Yea a good titan is better but for 150 these are good backup rigs.
I paint cars professionally for a living but, I'm planning to paint my house. Im hoping the transition to airless will be smooth given my experience spraying paint.
should be pretty easy. I painted cars before I ever pained a house. It is different as you dont blow off of stuff like you do on a car. Your more worried about where the overspray is going than the finish. On a car your worried about finish more than anything else. On a house finish is usually not an issue but where the paint goes is.
Great video
I always brush in........ and that sprayer looks better than dragging around my Titan 440. :-P
super light weight. just needs more line so you dont need to move it as much.
You are the best
Really appreciate your review. Do you know if Graco tips fit the Vevor guns?
that I am not sure. If you have a graco spray head and tip it will work. Also harbor freight tools has spray tips and heads. They do work on it too.
Flat tip is only way to go IMO. I’ve been spraying industrial for 6 years. Reverse tip is garbage and tried to tell lots of older guys I paint with that. Flat tip leaves a better finish and no plug up unless you don’t know how to mix a thin paint. I spray with conventional pot spray and airless but when spraying airless. Flat tip all the way
Thanks for sharing
@@mikethepainter I’ve watched quite a bit of your videos. You do great work, I’ve taken lots of your pointers into consideration and agree with lots of advice you give. Love you channel, keep it up 👍🏻
How do we figure out what size flat tip to use (never used a sprayer going to buy the vevor 950) it's 259 bucks on amazon w/wheels Thanks love the video's p.s. it comes with 50 ft rubber hose Thanks Pat
Could i paint a mobile home with this. Im trying to decide between this and a x5. Is it better to buy once. Only other thing id probably use it for would be a couple of sheds . Can i paint cars with this
no cars but you could paint a Mobile all day long with this sucker. even if you want to use water based enamel. Satin semigloss or egshell.
I know exactly who you're referencing with the 4' extension wands on everything, he lives in Idaho maybe its to make up for his lack of height, i dont know. He is literally a walking talking salesman on steroids. Great to have a sponsor but damn son are you here to teach how to paint and make a little cash or sell me everything on Amazon.
Your videos deserve way more attention, maybe if you start selling every reversa tip on Amazon the YT algorithm gods will reward you with the views you deserve. 😂
Question for you, what sheens do you prefer for wood facia and garage doors and trims. I don't hear painters talk much about sheens Besides flat paint for stucco. Im in Vegas and its becoming a trend for satin on stucco repaints. And literally everything here is stucco.
Thanks for the videos Mike 👍
flat and satin last just the same amount of time. Satin will do some sealing to the surface so if the wood cracks (like it does in the desert.) those heavy ocassional rains will get water behind the painted surface. Which causes peeling. so I would use flat. because it does breath a little. and allow the water to get released. I usually use flat on rough sawn wood and stucco. satin or semi on smooth wood.....or interior doors. Rarely ever put sheens on wood exteriors anymore. Not many houses with smooth wood.
@@mikethepainter Thank you for the advice, much appreciated!
I don't specialize in exterior repaints. I do kitchen/bath remodels and landscaping installs. lately I've been getting requests on exterior repaints from pass buyers while on my regular jobs and I've been turning down the work for 3 years now, so I recently decided to tackle a couple, it's fun but I'm still learning. The only part that Sucks is the fascia on just about every repaint is peeling wood/paint itZ horrible scraping and sanding all that down 28' up, and their only 10 Yrs old, originally painted with SW A100 everything out here.
BTW, Sucks the 49ers lost today, but Good game though.
Mike, what size tip would you recommend fot this unit for applying stain? After watching your videos on this vevor spryer, I'm going to give it a shot on my deck and fence. Going to use oil base stain. Any tips or suggestions would be helpful. Thanks for you videos, they are very educational.
yea this rig would be great for that. If your using water based alkyd emulsion stain you can use any rig. But straight oil you dont want to use your expensive water based rig for that. Most of the stuff at home depot is water based as far as I know. or water cleanup. great for fences. But oil stain is Better IMO. be sure to clean up with the recommended cleaner for that stuff you are using. Might be Mineral spirits. if your not in CA.in ca that is non existent.
Thanks for the quick reply, yes I think mineral spirits will do a good job and I know how important it will be to throughly clean after use. I just wasn't sure if the tip that comes with the unit, would work with oil base stain. Thanks again. I'll let you know how it turns out.
@@curtisking2962 oil stain would use a 3 13 or 4 13 spray vertically but dont blow off the top....angle down and spray horizantal when doing the top 6 inches. for the vertical spray use the pole
Dude i bought this cheap hvlp sprayer from HF just to help spray eaves and i tried spraying just one box right (you know eaves they form a box shape jf you look at it) i look back and there was overspray across my whole back patio. It shot overspray 20 friggin feet. Omg. I still have tonclean it all too. Horrible.
Similar story, but all of the over spray landed on my car
Do you have to thin paint??? Before you put in the sprayer???
No
for the most part no. But on flat paints I would thin it about 1/2 gallon of water to a 5 gallon. for this sprayer. it is fine for most materials but it it strains you might want to thin it a little bit. Not too much water. only at the most 1/2 gallon to a 5 gallon of paint.
@@mikethepainter thanks Mike
Vevor has a model up that's like $450 I think would you consider that model worth the extra cash for a painter just starting out?
Renting a rig for a day for a good sprayer is $150 a day and they charge $75 if you leave it even slightly dirty.
Can't believe using a reverse tip. Old man talking all that s*** and you're using one.
How can painters afford to live in commifornia?
only ones who are established and have their house paid for. other than that they are leaving in droves.
I work for a HO in lieu of rent otherwise i would be in another state. Texas maybe. Idk. This state is falling apart. It is not friendly at all to business owners and costs a fortune to buy a home. Not to mention property taxes, if you are thinking about buying a house here forget about it. The HO i stay with paid $35k for this house in the late 60s today with the additions he's done its easily over 2mil my old house across the street sold for 500k just ten years ago. Now it's worth 1.3 rent is out of the question a one bedroom hovel a walk in closet basically would fetch $1500 and up. Not exaggerating. And the economy sucks sure there are lots of "jobs" to apply for you have to apply to over 100 easily to get one or maybe two responses. I decided to take up painting seems like painters are hard to come by but what sucks is people only paint when they want to sell. Lot of homes in my area are sitting on 15+ year old paint. Our roads are fked up potholes you would not believe. If this is the best Gavin Newsom can do he would be a terrible president but I'll reserve judgement as he may not be to blame. This state is 20 years away from falling behind Mexico no joke. All the nice shiny stuff that made the state look great all the tech money js gone. I live in what was silicon Valley. Sad sight to see.
@@Mike-qo4kp texas isn't far behind, it's a race to the bottom here with all the illegal immigrants driving labor into the ground for the past 30 years. Housing used to be decently priced here now its far beyond what anyone can afford. I thank God every day my dad was smart and built his house in the 80s literally by himself. He passed away, I had to fight the state for it and luckily came out on top. Its a scary world we live in. Hang in there.
Painters get 8500 for a 1200 spuare foot house minimum,they make enouph
@@bradleywise835 it doesn't matter how much you can make if there's no work. I think that was the point.
Considering your line of work im surprised you painted your house with such a bland color scheme. Where is the artisitic expression??
the front of my house has a large area with accent color. I never go bright on a body. Bright colors on houses Yuck.....if your going to do a brighter color use it on shutter or accent wall 3 color or 4 color job. Never on a body.
😂
Flat tip is only way to go IMO. I’ve been spraying industrial for 6 years. Reverse tip is garbage and tried to tell lots of older guys I paint with that. Flat tip leaves a better finish and no plug up unless you don’t know how to mix a thin paint. I spray with conventional pot spray and airless but when spraying airless. Flat tip all the way
Great tip!