Excellent video. I ran into the same issue with the clips on the battery brackets. Did you have any issues with your air intake box installation? im having hardware issues. My directions say to use 1/4 -20 x 5/8 long bolts, but my rubber grommets are longer than that. Only thing I’ve figured out is to use my factory hardware?
Don't recall any issues with the airbox. I can double check when I get out to my shop. Getting everything pulled off to repaint after a few years of wheeling rash and a roll.
great job!. I heard several people talk about the hood not lining up and there being a gap between the hood and the top of the fender. Was that your experience?
Everything but the flare (6" extension) so that you can pick your size. They have held up great, even during a hard roll. Pulled them off to repaint. May do a follow up video.
![Jeep TJ Front Fender Install [Metalcloak Overline Fenders]](http://i.ytimg.com/vi/9Wt6sfRmLQw/mqdefault.jpg)
What flare size is this 4 in or 6 in?
what tire size and lift ae you running ?
That was 2.5" on 37s
Awesome Video! Thank you for posting. This was very helpful doing my MetalCloak Front Fender install!!!
Excellent video. I ran into the same issue with the clips on the battery brackets. Did you have any issues with your air intake box installation? im having hardware issues. My directions say to use 1/4 -20 x 5/8 long bolts, but my rubber grommets are longer than that. Only thing I’ve figured out is to use my factory hardware?
Don't recall any issues with the airbox. I can double check when I get out to my shop. Getting everything pulled off to repaint after a few years of wheeling rash and a roll.
What size lift and tires did you end up going with?
Settled in with 3" front spring and 2" in the rear. Not sure either are given the true stated loft since it sits level though
About how long did it take start to finish?
If I was videoing the whole thing I'd say about 3 hours.
are those powder coated from metal cloak or did you have them painted?
Painted. Check out the part 1 video on the steps I took for painting.
great job!. I heard several people talk about the hood not lining up and there being a gap between the hood and the top of the fender. Was that your experience?
Fitment was great for me
What size flares are those, 4" or 6"? looks great!
Thanks 6 inch
Front and back both 6"?
Correct
awesome video, im looking to get the tube fenders, did all of the equipment in this vid (like the inner liners) come with the whole kit?
Everything but the flare (6" extension) so that you can pick your size.
They have held up great, even during a hard roll. Pulled them off to repaint. May do a follow up video.