Thanks for this video> I have a question though, after you put the tag-flex and done programming it should I remove it before putting it on the phone or it will stay together?
Good jo , its good to know you don't need need to keep that flex in , i an wondering can the flex be used on the same model over and over ! Only at £14.99 per flex for each model things could get pretty costly !?!
Do you need to remove the metal full from the old weld or can you solder over top of it? Ive been trying but always seem to mash up the battery metal so doesnt leave me with a lot to weld to :(
I know man my iPhone SE second GEN is down to 79% battery health and I want to get the battery replaced in mine but I don’t want a third-party repair shop to screw up and do it wrong
7:18 do we need to make that not genuine battery message to pop up ? Is it one of the steps in order for the iphone to detect the ones we soldered as genuine ? I'm really asking here not being sarcastic
yes, its a required step in the process. The phones needs a chance to recognize the battery again and correct the settings and this is the easiest way.
I watched another video that said that those tag on flexes from qianle are not reusable and to go with i2c, there is also jcid and im wondering which one would be the most cost efficent
Yes, once all steps are followed properly and the phone has altered the data in the settings the tag on flex can be removed and reused on the next one.
What an effort you have to put in only to remove that message. What happens if I only change the battery. Does only the message come up or do I have any disadvantages by only changing the battery?
Hi there, i have followed all the videos instructions correctly however when trying to bind/write-in the new data it keeps on failing, i have fully charged the battery. Any ideas on how to resolve this issue would be much appreciated. many thanks
Yea we need an update on this because at first anyone would think oh you just programmed the percentage to be at 100 which makes sense cuz it’s a new battery it should be at 100, which also means you can also program an old battery to also be at 100 right? After this, does it lose percentage with time or it’s just stuck now on 100
I wonder how many times can you replace the baterry using spot welder ? The BSM looks pretty worn after first welding already, so what if you replacing the baterry third time for example ?
In my opinion the spot welder used in this video was set to high power. Certain types of spot welder gives the user the ability to adjust the power. Maybe 40-50% power is enough to spot welder such a small piece of metal.
@@diogenescaruaru okay, but lets say you going to replace the battery which was already repalced and spot welded before, is it okay to spot weld the bsm multiple times ?
Mobilesentrix doesn't sell tag on flex for XS and XS max models. I called them and asked why and they said those models don't need a tag on flex. If so, then how do you connect the battery to the iCopy to reprogram it? Or am I just missing something?
The code can be altered with the programmer for the XS and up but the security on the 11-13 and probably 14 is different and needs the additional tag on flex that basically bypasses and allows the code to be read and written.
For X, XS, you just install the battery. you dont need to change the daughter board. the new board on the battery will show 100% it starts with XR and SE2020
Great Video. I have used this method to replace my iphone 12 Pro Max battery that was at 73% and so was showing the service message 'your battery health is significantly degraded'. I replaced the battery and set the health to 100% and cycle count to zero. Even though the health is showing as 100%, the service message is still there? Do you know why this may be? and how do I remove it? Thanks
Thanks for the Video!! So is this only working with the original BMS Board? I didn't get the point why I cannot use a non-genuis BMS Board with this cable.
Hello and best wishes 2023!!... super video!!! Well detailed!!! Thank you...I have a little problem.. Maybe you could help me...I’ve done the same work on an iphone battery 11(well done..I specify).. but by connecting the new battery welded and equipped with the original phone’s tablecloth to the copy power Q7.0 on...I have no indication of cycles and % of state...?!.. this battery is good because I tested it before with its original tablecloth...I don’t understand why it says nothing with the new connector installed.. Do you have any idea pléiade?...
Hello...thank's for your answer...yes i m using the iphone 11 quiantly tag on flex in perfect position And i check polarity wifh metrix....i don't anderstand why i haven't voltage to the controler poles + and -...just 0.33v. But to the directly battery poles it's ok...4.15v...
if you have a video fix for XR battery? is it same? and if AMPSENTRIX core are only option? I have an IPhone XR that one of shops replaced battery that is not recognised and as result not charging well/not staying on - turning off after some time/battery not lasting even 5 min after charge/needs all the time to be connected on charge..
I’ve been looking for a detailed quality video on this for a while, came across your video and it was super helpful. I had a question though, supposed i reset my old battery’s efficiency and cycle count would it reflect on the iphone or would it remain at its old battery health under settings?
Great question, if you reset the battery data without swapping the battery cell the phone will recognize after a day or two of use what the data should reflect and it will adjust itself back to the health percentage it was. Hopefully that helps
@@FIXDPHONES Would this be true for only newer model iPhones? Because I know for a fact a lot of Chinese battery sellers sell original batteries that were simply reset to 0 cycles and 100% health but I have never seen them adjust after a few days.
@@FIXDPHONESAnd if I use the 90% battery from the second iPhone, what data will it display after inserting it into the iPhone where the battery was 80%?
The only was to get the notification gone it some type of display ic transfer. Either to an oem screen or to an aftermarket screen that is capable of an ic swap or tag on flex.
I have a problem every time I soldered the cell to the new battery it no longer works could you help me with a tip!!! I've been watching the video more than 100 times I'm interested in learning, but even so the original flex burns I need help please !!!!!!!
Is it absolutely required to take the original BMS from the genuine battery? I’m replacing an iPhone 11 battery and QianLi states you only need the flex tag. (Read the original battery info. Put flex tag on new battery. Write info to new battery. Then change the cycle and health info and write again. Install new battery with flex tag.)
@@FIXDPHONES ok thats great. Thank you. Main issue is the actual phone. So all is good. Does the health ages the same without the flex? Or is it stuck still at 100?
I tested it with the iPhone 11. Replaced battery, welded original flex on it and reset to 100% health and 0 cycle counts with tag-on flex. After the process I removed the tag-on flex. 100% is retained even if you reset your phone and change iOS to a different Apple ID. 100% also survives iOS updates. If you connect the phone to 3utools, the old percentage and number of old cycles will be displayed. And if you put another battery in and put the battery back in with the original flex, you'll see the old percentage in iOS settings. I also think 100% doesn't decrease over time like it's happen with older iPhones if you swap the battery. I will report when something new happens.
@@Gesundheitsattest Hello brother I need a little bit help. Do you need a new flex per iphone. So when I use 1 flex cable for iphone 11 I can't use it for another or am I wrong?
i have and iphone 11 and when i'm trying to write the new information it shows this message "the battery is bound, please untie it!" and also when i click on Unbind it shows "this cable is not bound to the battery. please replace the cable" what can i do? which cable do i need to replace?
Does it actually matter which battery connector you connect the tag on flex to when writing the data? AND does it matter which battery connecter the tag on flex is connected to when installing new battery in the phone? Thanks
If i just copy with the tag the data on the new battery, i can see the percentage of health on the new one? Or i'm forced to change the flex cable from the old battery to the new? I just want to have the percentage, i'm not intereasted at the error of the unknown parts. Can someone help me to answer the question? Thanks
If i will buy aftermarket battery with different battery controller can i unplug original apple battery first, after plug new replacement to boot up to see msg non genuine battery next swap controllers + tag-on flex edit cycles and battery status? I don’t have any other battery or power supply to boot up... In few words: I would like to use new battery with manufacturer controller to boot up iphone to get non genuine battery pop up. Will it works?
Please is it true that the battery health stays at 100% and doesn’t decrease and Also that if the tag on flex isn’t attached to the battery the battery health only shows for few days or weeks and suddenly please is this true?
Please is it true that the battery health stays at 100% and doesn't decrease and Also that if the tag on flex isn't attached to the battery the battery health only shows for few days or weeks and suddenly disappears please is this true?
Thanks for the great video. Is there any difference between the tag-on flex external battery flex and the built-in battery flex? Because we saw both flex for iphone 11, and we do not know which function has each one. Can you help? Thanks again for the good video!
But after time goes by, will it start to decrease in settings on phone? Or until next restore/update? Asking as a repair technician myself. Thanks for your future answer.
Thanks so much for the video! I am about to join this world about battery change after iphone X so this was very helpful. Just one question, the one battery than you need to put once for restarting the phone could be reused? Could it be literally any other battery (Like just an old original from another phone) ? Thanks in advance!
@@mathi6832 it is recommended. At least for many iphones 11 of mine and colleagues, the phone stars to act crazy cuz the system checks the cycles in each update (at least that’s what we think)
Should be around the same price if they are fair, seeing as the battery cell is less expensive than a replacement battery and it’s only an additional 5-10 minutes of work.
ill answer that.. a about the same price apple will BUT.. my customers walk in and are done in one hour while they go have have lunch. You dont get that at apple, even IF the store is next to you
Or you go to injured gadgets, get their battery, tack the old connector then use their pre programmed flex tab, start the phone, reboot it and you're all done
So why do you guys still buy Iphone despite the competition can do much more like still having 3.5mm and Ir blaster, etc when Apple just removing things, making it unrepairable to point of being a nuisance to the environment and makes you contemplating on who actually own the device that you actually bought for 1000usd, amount of money you could use to buy phone or stuff that could do much more than this garbage, or even better pay taxes or feed yourself to actually survive...
battery replacement in apple costs 60 euro with the labor,genuine battery and display adhesive,saving few euros and your fake battery will need replacment no more than a year,thats how long they last,risking display damage and no waterproofing at all,not worh the effort for such a expensive devices
Where’s the scam? That’s like saying you can’t replace the tv remote batteries when you need to and instead you should buy a new tv to get a remote that has good batteries.
Do you have to have a third battery? Could you just insert the replacement battery before programming it > remove it > program it > put it in again?
Very interesting video and very informative
Glad you think so!
which program on your computer is that?
Thanks for this video> I have a question though, after you put the tag-flex and done programming it should I remove it before putting it on the phone or it will stay together?
So you only need Quianli battery flex to write the new data? Or must it stay on the battery for the rest of its life?
I use it just to write then I leave it out
The frex cable can be used multiple times?
Can we leave the tag on flex inside the phone after changing the battery
Yes
What does the iPhone parts and service history says when you do that? Does it says that there is an unknown part?
Good jo , its good to know you don't need need to keep that flex in , i an wondering can the flex be used on the same model over and over ! Only at £14.99 per flex for each model things could get pretty costly !?!
Can I just use the external flex with a new battery without removing the battery board from one battery to another
Hello I have 11 pro max 74% …I need to change it.I see you fix the problem with notification of the battery nice
Do you need to remove the metal full from the old weld or can you solder over top of it? Ive been trying but always seem to mash up the battery metal so doesnt leave me with a lot to weld to :(
It's really stupid APPLE made it this hard just for a battery percent. Extra work for no reason
I know man my iPhone SE second GEN is down to 79% battery health and I want to get the battery replaced in mine but I don’t want a third-party repair shop to screw up and do it wrong
Hello,
Thank you for the well explained video, I would like to know the name of the software with which you put the battery at 100%
7:18 do we need to make that not genuine battery message to pop up ? Is it one of the steps in order for the iphone to detect the ones we soldered as genuine ? I'm really asking here not being sarcastic
yes, its a required step in the process. The phones needs a chance to recognize the battery again and correct the settings and this is the easiest way.
I have an Apollo interstellar one with an additional battery board that takes 11 and 12 series batteries, would I still need to go the copy pro?
Hello sir, is ip11 above can use this step by using Apollo Interstellar.?
I watched another video that said that those tag on flexes from qianle are not reusable and to go with i2c, there is also jcid and im wondering which one would be the most cost efficent
They are designed to stay with the phone but a lot of people opt out of that and reuse them over and over.
where can I get this batteries? I’m from EU. thanks for the answer 🙏
as i know the adaptor wich used for programing battery you dont put it to mobile i mean you just use it for programing? is that right?
Hi , can we reuse the tag on flex ?
Wht power volt for solder bos?
Does regular metal heating pen work for soldering?
Did you ever find out bro
@@sampson4886 no brother didnt find an answer, ended up ordering electronics one
Very detailed video, just what I was looking!!!
I want to ask if the fpc cable that you removed can be used in other batteries just to program them?
Theoretically yes, but the tag on flex should remain in the device as it will reset after a full battery cycle without it on the 11 and 12 series.
@@FIXDPHONES can you explain batter ?
I have one question. Can you reuse the tag on flex afterwards?
Hello, we’re you ever able to reuse the cable afterwards?
^^
Yes, once all steps are followed properly and the phone has altered the data in the settings the tag on flex can be removed and reused on the next one.
@@FIXDPHONES thank you so much for your time and research!
What an effort you have to put in only to remove that message.
What happens if I only change the battery. Does only the message come up or do I have any disadvantages by only changing the battery?
Cant believe apple made it so you now need a Fn welder just to change the battery properly..
I think you can just solder it .
Fiz o transplante de celula, porém não está funcionando, será que danificou i flex?
can you explain the solder you used?
No solder, it’s spot welding. You can find the spot welder at mobilesentrix.com
Hi there, i have followed all the videos instructions correctly however when trying to bind/write-in the new data it keeps on failing, i have fully charged the battery. Any ideas on how to resolve this issue would be much appreciated.
many thanks
What’s the software called. Need to download iy
How about when you connect the iPhone to 3utools, does it show the old battery health and old cycle times? Or new battery health and new cycle times?
If you leave the tag on flex in then 3utools will see the new data, if you leave it out then 3utools will see the original data
After you reset battery back to 100% does it then lose percentage like normal, or is it "locked" at 100%?
Yea we need an update on this because at first anyone would think oh you just programmed the percentage to be at 100 which makes sense cuz it’s a new battery it should be at 100, which also means you can also program an old battery to also be at 100 right? After this, does it lose percentage with time or it’s just stuck now on 100
I wonder how many times can you replace the baterry using spot welder ? The BSM looks pretty worn after first welding already, so what if you replacing the baterry third time for example ?
In my opinion the spot welder used in this video was set to high power. Certain types of spot welder gives the user the ability to adjust the power. Maybe 40-50% power is enough to spot welder such a small piece of metal.
@@diogenescaruaru okay, but lets say you going to replace the battery which was already repalced and spot welded before, is it okay to spot weld the bsm multiple times ?
@@Marek21 i heard there is a way to transfer ic from ori bms to other bms
Hi where to buy the cutter?
Mobilesentrix doesn't sell tag on flex for XS and XS max models. I called them and asked why and they said those models don't need a tag on flex. If so, then how do you connect the battery to the iCopy to reprogram it? Or am I just missing something?
The code can be altered with the programmer for the XS and up but the security on the 11-13 and probably 14 is different and needs the additional tag on flex that basically bypasses and allows the code to be read and written.
For X, XS, you just install the battery. you dont need to change the daughter board. the new board on the battery will show 100% it starts with XR and SE2020
Are you sure about this? I installed a replacement battery and it complains for unknown part@@floridaapplemacprosinc.2224
Great Video. I have used this method to replace my iphone 12 Pro Max battery that was at 73% and so was showing the service message 'your battery health is significantly degraded'. I replaced the battery and set the health to 100% and cycle count to zero. Even though the health is showing as 100%, the service message is still there? Do you know why this may be? and how do I remove it? Thanks
Thanks for the Video!!
So is this only working with the original BMS Board? I didn't get the point why I cannot use a non-genuis BMS Board with this cable.
The original one is paired to the phone and unfortunately the code can’t simply be read and written to another board yet. Maybe one day
Your iPhone is still working fine without the tag flex?
yes
and 100still or it works like normal?
Hello and best wishes 2023!!... super video!!! Well detailed!!! Thank you...I have a little problem.. Maybe you could help me...I’ve done the same work on an iphone battery 11(well done..I specify).. but by connecting the new battery welded and equipped with the original phone’s tablecloth to the copy power Q7.0 on...I have no indication of cycles and % of state...?!.. this battery is good because I tested it before with its original tablecloth...I don’t understand why it says nothing with the new connector installed.. Do you have any idea pléiade?...
Are you using the tag on flex and if so are you sure its in the correct orientation?
Hello...thank's for your answer...yes i m using the iphone 11 quiantly tag on flex in perfect position
And i check polarity wifh metrix....i don't anderstand why i haven't voltage to the controler poles + and -...just 0.33v.
But to the directly battery poles it's ok...4.15v...
can i use this for iphone xs?
What is the name of tool you used to sold the battery terminals
It's spot welder
is it ok to just use soldering iron instead of welding machine?
thanks
As long as the joints end up solid then it doesn’t really matter.
@@FIXDPHONES thanks sir, i hope you have a nice day
if you have a video fix for XR battery? is it same? and if AMPSENTRIX core are only option? I have an IPhone XR that one of shops replaced battery that is not recognised and as result not charging well/not staying on - turning off after some time/battery not lasting even 5 min after charge/needs all the time to be connected on charge..
Would it be possible to solder the data board instead of tack welding?
Yes it’s possible, but the tack welders are cheap and easier to use
solder won't hold. also possible these get hot, soften solder
If I erase the phone will the battery capacity still remain 100% if the tag on is removed like you instructed?
I’ve been looking for a detailed quality video on this for a while, came across your video and it was super helpful. I had a question though, supposed i reset my old battery’s efficiency and cycle count would it reflect on the iphone or would it remain at its old battery health under settings?
Great question, if you reset the battery data without swapping the battery cell the phone will recognize after a day or two of use what the data should reflect and it will adjust itself back to the health percentage it was. Hopefully that helps
@@FIXDPHONES Thank you!! I tried it out and saw the data didn’t change
@@FIXDPHONES Would this be true for only newer model iPhones? Because I know for a fact a lot of Chinese battery sellers sell original batteries that were simply reset to 0 cycles and 100% health but I have never seen them adjust after a few days.
What software do you use i have the copy power but where do I download software
@@FIXDPHONESAnd if I use the 90% battery from the second iPhone, what data will it display after inserting it into the iPhone where the battery was 80%?
Does this repair work for iphone XS, XR and13
Do you have to tac weld the battery or can you solder it instead?
I've seen it done Soldering by them on, It looked like a lot of work, If your doing more than one just spend the $40 for the spot welder.
yes! +200C and no problem 🙂
Is there something like that for displays, but the message always comes up: unknown component
The only was to get the notification gone it some type of display ic transfer. Either to an oem screen or to an aftermarket screen that is capable of an ic swap or tag on flex.
Can i do this with every Batterie?
sinon y a des outils quian li pour copier
hello, I need help, my bms is dead after replace cells. It's there any solution to fix it. Thank you
I have a problem every time I soldered the cell to the new battery it no longer works could you help me with a tip!!!
I've been watching the video more than 100 times I'm interested in learning, but even so the original flex burns
I need help please !!!!!!!
Is it absolutely required to take the original BMS from the genuine battery? I’m replacing an iPhone 11 battery and QianLi states you only need the flex tag.
(Read the original battery info. Put flex tag on new battery. Write info to new battery. Then change the cycle and health info and write again. Install new battery with flex tag.)
The bms board is where the serialized components are. The only thing the tag on flexes do is allow you to override the data
After copying, I keep seeing the old percentage, with or without the tag on flex.. Any idea?
Did you see any issues with not leaving the tag installed?
Only that 3u tools can still access the prior data. Otherwise the phone had no issues.
@@FIXDPHONES ok thats great. Thank you. Main issue is the actual phone. So all is good. Does the health ages the same without the flex? Or is it stuck still at 100?
Is it true that without the flex tag health stays at 100% and doesn't decrease over time?
great question I would like to know the answer as well
Any update over time? Is the health decrease as new battery? Or jump directly on service?
??
I tested it with the iPhone 11. Replaced battery, welded original flex on it and reset to 100% health and 0 cycle counts with tag-on flex. After the process I removed the tag-on flex.
100% is retained even if you reset your phone and change iOS to a different Apple ID. 100% also survives iOS updates. If you connect the phone to 3utools, the old percentage and number of old cycles will be displayed. And if you put another battery in and put the battery back in with the original flex, you'll see the old percentage in iOS settings. I also think 100% doesn't decrease over time like it's happen with older iPhones if you swap the battery. I will report when something new happens.
@@Gesundheitsattest Hello brother I need a little bit help. Do you need a new flex per iphone. So when I use 1 flex cable for iphone 11 I can't use it for another or am I wrong?
Please can I get the link to download the Qianli icopy plus file. Thanks
i have and iphone 11 and when i'm trying to write the new information it shows this message "the battery is bound, please untie it!" and also when i click on Unbind it shows "this cable is not bound to the battery. please replace the cable" what can i do? which cable do i need to replace?
Great job assembling iPhone battery 😊
Does it actually matter which battery connector you connect the tag on flex to when writing the data? AND does it matter which battery connecter the tag on flex is connected to when installing new battery in the phone? Thanks
Yes it would be nice to know pls!!
If i just copy with the tag the data on the new battery, i can see the percentage of health on the new one? Or i'm forced to change the flex cable from the old battery to the new? I just want to have the percentage, i'm not intereasted at the error of the unknown parts. Can someone help me to answer the question? Thanks
I have a 11 pro max at 77 batt health do u recommend having it changed? Thanks
Yep, at that percentage it’s probably only lasting half a day
This process its work in icopy plus?
@@donkxp yes. icopy plus v2.1 v2.2 work
@@sncat Would you recommend the icopy plus or Apollo?
Can we use apollo intersteller programmer to edit values?
Yes, it’s a great tool for that.
I need setup for computer
When you connect the phone without tagon to the computer and run the 3 utools program, you will see the old percentages
will not happen with jic flex. looking to try with qianli after this
I see in the comments you are now recommending to leave the tag on flex connected to the Core battery when installing in the phone, correct?
Correct
if you keep the flex, in 3utools the load cycles do not appear. On the other hand, if you remove the flex, the original load cycles appear
If i will buy aftermarket battery with different battery controller can i unplug original apple battery first, after plug new replacement to boot up to see msg non genuine battery next swap controllers + tag-on flex edit cycles and battery status? I don’t have any other battery or power supply to boot up... In few words: I would like to use new battery with manufacturer controller to boot up iphone to get non genuine battery pop up. Will it works?
Did it work?
Would it work that way with a JCID programmer? King Regards
do you have answer now?
Please is it true that the battery health stays at 100% and doesn’t decrease and Also that if the tag on flex isn’t attached to the battery the battery health only shows for few days or weeks and suddenly please is this true?
Please is it true that the battery health stays at
100% and doesn't decrease and Also that if the tag
on flex isn't attached to the battery the battery
health only shows for few days or weeks and
suddenly disappears please is this true?
@@angivagadgets5881 battery healthy decreases on every iOS update
Does this work with any type of batteries or do i have to use ampsentrix core ?
Thanks for the great video. Is there any difference between the tag-on flex external battery flex and the built-in battery flex? Because we saw both flex for iphone 11, and we do not know which function has each one. Can you help? Thanks again for the good video!
can you use icopy + ?
I just found out after fixing battery health 100% if you remove the tag flex, when you use 3utools it showing old battery cycle and battery health
Yes, this is the only downside to not leaving the tag on flex in.
You have to keep the cable inside phone to show 100% life in 3utools otherwise it will only show old data 81% in 3utools but 100% in phone
correct
But after time goes by, will it start to decrease in settings on phone? Or until next restore/update? Asking as a repair technician myself. Thanks for your future answer.
@@andrewzasidko6595 if you have an answer to your question please let me know
@@andrewzasidko6595 I dont think so. the tag is just for a "hijack" on 3utools"
Hey I need to fix my phone. How can I get in contact with you ?
Visit my webiste to submit a repair request www.fixdirepair.com/
Thanks so much for the video! I am about to join this world about battery change after iphone X so this was very helpful.
Just one question, the one battery than you need to put once for restarting the phone could be reused? Could it be literally any other battery (Like just an old original from another phone) ? Thanks in advance!
have you found an answer? i would also like to know
@@mathi6832 hi! The answer is yes! You also have to keep the tag-ons on the phone. New ios is generating problems
@@94shaco wait so i need an tag on for each battery now?
@@mathi6832 it is recommended. At least for many iphones 11 of mine and colleagues, the phone stars to act crazy cuz the system checks the cycles in each update (at least that’s what we think)
@@94shaco thanks for letting me know
Well done, thanks for sharing, this is a really good repair video and it helped me a lot. Thanks again for the great video!
you forcefully made the battery health 100%. But it is really 100% as like fresh? will not it make any problem?
so you have to leave the linked tag or not? I did not understand, I see many conflicting opinions in the comments. I need to know 🥺
Leave it in
Will try this in a month or so and let you know how it went
thanks for the great video 😉👍
as i know the adaptor wich used for programing battery you dont put it to mobile i mean you just use it for programing? is that right?
How it is going?
All this just to install battery, why not ignore the warnings and keep using ur brand new battery, since it doesn't stop the new battery from working
Wonderful, but now I’m wondering how much will 3rd-party repair shops will charge to do all of this.
Should be around the same price if they are fair, seeing as the battery cell is less expensive than a replacement battery and it’s only an additional 5-10 minutes of work.
ill answer that.. a about the same price apple will BUT.. my customers walk in and are done in one hour while they go have have lunch. You dont get that at apple, even IF the store is next to you
amazing video
Hi man, great job.
Bloody hell wouldn't just be easier to take the message for a few days lol
Even though most people would simply live with the message The battery health would be gone for good
Unfortunately, the message doesn't go away and a notification persists in settings. It's just kind of annoying.
Or you go to injured gadgets, get their battery, tack the old connector then use their pre programmed flex tab, start the phone, reboot it and you're all done
Or you could go to Mobilesentrix as they have the pre programmed tag ons as well now, this method is still valid but the newer one is easier.
@@FIXDPHONES definitely makes it less expensive with reusable $5 tags vs buying a device.
Music massive distraction
it works but it will never be like the original battery. 😂😂😂😂😂
Bro is heat resistant
👍
Reason why batteries aren’t lasting is cuz of the iOS updates they drain the battery worse n worse and they dnt wanna fix the problem
soldering...veryyyyy bad.
Glad you think so, as there is no soldering in this video.
So why do you guys still buy Iphone despite the competition can do much more like still having 3.5mm and Ir blaster, etc when Apple just removing things, making it unrepairable to point of being a nuisance to the environment and makes you contemplating on who actually own the device that you actually bought for 1000usd, amount of money you could use to buy phone or stuff that could do much more than this garbage, or even better pay taxes or feed yourself to actually survive...
Kok iso 🤣
battery replacement in apple costs 60 euro with the labor,genuine battery and display adhesive,saving few euros and your fake battery will need replacment no more than a year,thats how long they last,risking display damage and no waterproofing at all,not worh the effort for such a expensive devices
mad the lengths you have to go to change a battery. apple are a joke
Damn on you. Because of you people every seller is scamming with his customer
Where’s the scam? That’s like saying you can’t replace the tv remote batteries when you need to and instead you should buy a new tv to get a remote that has good batteries.
stupid comment. go to apple then you psy