LX Dodge H&R Lowering Spring Install!! | 06-10 Charger, Magnum, 300, Challenger
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- H&R 50888 Lowering Spring install on my 08 Charger R/T.
Install guide applies to all 05+ Dodge/Chrysler cars (Charger, Challenger, Magnum, 300)
Awesome work, car looks 👌🏻
That is cool!!
Just got the same springs 💪🏽
@@SRTMarcco good choice!!
You mentioned that you were going to tighten up the front control arm bolts under load on reassembly. What type of load are you putting the suspension under? Are you using the jack to put it under load, or did you tighten them up when you lowered it down on the wood blocks?
@@seansdriveway I’ve done it a few ways…one way is compress the suspension with the jack but you can only do one side at a time. Probably the best way is to put the wheels back on and lower the car down on ramps so you can crawl underneath and torque the bolts. Basically you want the suspension at ride height. Any suspension bolt that passes through a rubber bushing should be done this way.
@@anthonysgarage1 sweet! Thank you for tip. I'll do it that way when it comes to doing it on my charger. What type of rachet were you using to tighten down the top strut bolt? That thing is definitely what I need
Could you tell much of a ride difference going from ebay to a better spring. I have about the same setup and want to upgrade. The Amazon springs lowered the srt8 3 inches and I’d like to lift it an inch. But only if I have better control and ride quality.
@@timmorton6049 The H&R springs ride great! Zero complaints! Maybe a tad stiffer than oem SRT8 springs
@@anthonysgarage1 thank you for the information and content, I enjoy your channel!
What size are those rims brother?
@@macflow9661 those are the stock 20” wheels