Noise Sculpting with the Synamodec - Gorse Lathe

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ม.ค. 2025
  • Synamodec - Gorse Lathe
    www.noisebug.n...
    This synth has 2 sound/noise generators whose outputs are mixed,
    they go through the Harmonics and from there to the output,
    but with a switch we select which one goes directly to the harmonics
    and which one goes to the delay.
    In N to Dly position, the signals go
    Noise - Dly - harmonics - out
    Legus - harmonics - out
    In L to Dly position the signals go
    Noise - harmonics - out
    Legus - Dly - harmonics - out
    NOISE - The switch selects three types of noise,
    white, white LP and grain, a control allows you
    to regulate the grain level,
    output level control and Tex,
    before going to the mixer the noises go through a filter,
    cut-off control and resonance,
    and with a switch we select HP or LP output.
    The upper NOISE switch selects whether the output is fixed
    or triggered by an external gate signal.
    If we choose fixed, the LED will always be on.
    If we choose trigger mode, the LED will light up with each gate pulse.
    The Decay control then operates like a small envelope.
    Synamodec - Gorse Lathe
    The Sens control adequately regulates the external gate signal applied
    The Rate and PWM control is for the LFO (only for delay) control the
    frequency and the waveform
    LEGUS - Legus consists of 4 original oscillators interconnected
    and mixed together, we also have output level control
    DLY - We have Input level , Time, feedback and Dry/Wet controls
    And a Modulation control that control the level of the LFO to modulate
    the Time of de delay.
    HARMONICS - It is a 6-band filter/equalizer, with input and feedback level control.
    Keep in mind that there are three level controls with which we can work
    to obtain sound at the output.
    If, for example, we select N to Dly,
    we will have to act on the output level control of the noise generator,
    on the input level control of the delay
    and on the input level control of the Harmonics.
    #desktopsynth #modularsynth #synth #analogsynth #synthesizer

ความคิดเห็น •

  • @williamconnor593
    @williamconnor593 2 หลายเดือนก่อน

    Nice one, Miguel! Keep 'em coming!

  • @leyetnin1
    @leyetnin1 2 หลายเดือนก่อน

    Mother Of God, Puss-Puss!! Sogghi crapped his pants!!

  • @Essyinfo
    @Essyinfo 2 หลายเดือนก่อน +1

    Sounds like it's broke to me. All those dodgy guitar leads that I could have put in a box with knobs on. 😂😂