I love CRG RC levers. I have them on my Buell. I have their bar-ends too. My Kawasaki is green. CRG doesn't offer a green adjuster so I went with Puig. They actually cost more. CRG and others need to add green to their color choices.
I purchased a set of these levers thru you but was sent levers that don’t even fit my bike. I used the website and input my year, make, model, etc...but, for whatever reason, I was still sent the wrong levels. The original bolt won’t go thru the bore of the new levers. How do I refund or exchange?
Need adjustable levers for 87 Honda Rebel Cmx450c? No1 has any Her fingers won't reach the levers!! I love the Halo, but no1 makes em for this bike. I need the levers closer to the bar/grips
Hey I have a question what are the numbers on the clutch levers bc idk if its my clutch but as my bike starts rolling it stalls so what's the numbers do
Am.about to order it now from ur website .. But I need to know if this lever will never effect and spoil the sensor of the cruise control for the s1000r bmw 2017?? Plz tell me before I.order it. Thanks for the video
Any help? I switched to these recently and when I pull the clutch in and let go it doesn't pull back to original position it just stays and I have to push it back.
I just purchased these from your site. How can I adjust the clutch lever pull? My hand is dead after 10 minutes because the clutch is so hard to pull in. Any advice before I install?
+Dan Read If your priority is weight savings, then I'd say they're perfectly fine for the track. If the priority is on-the-fly adjustment, then the RC2 Levers are the better option. -DrewZilla
Can I use for HONDA CBR250RR , I'm looking for a clutch lever, which could create lighter clutch. what is the difference CRG clutch lever and clutch lever ACCOSSATO Thank's
I believe Accossato levers are only for entirely replacing your stock lever and stock clutch perch. CRG offers replacement levers for stock perches as well as entire replacement clutch levers/perches. CRG does not have a replacement lever for your stock perch, but you may be able to use a full clutch lever/perch assembly. -DrewZilla *www.revzilla.com/motorcycle/crg-sc2-clutch-lever-and-perch-assembly
+Elanas Šm. You might find shorter levers more comfortable if you normally only use two fingers to brake. Also, short levers are less likely to break if the lever hits the ground. Some also just like the look of short levers. -DrewZilla
+Elanas Šm. Yea its mainly if you like to shift with just 2 fingers so you dont smash your other 2 fingers trying to fully engage the clutch. And of course color style and function. Some have on the fly free play adjustment.
These aren't really designed for Harleys. Instead, consider these affordable levers available in black. -DrewZilla *www.revzilla.com/motorcycle/drag-specialties-hand-levers-for-harley
Hello everyone. New to motorcycling so excuse me if this is a noob question lol. Anyways, i bought a 2012 zx6r with crg rc2 levers already on it. I noticed that the brake lever is kind of loose also when i let off the brakes the brake light wont come off unless i push the lever forward. Is there any easy way i can fix this?
It could be an issue with the piston in the master cylinder or it could be that the CRG lever is missing a sleeve/collar that might sit between the lever's pivot and the lever bolt on which the lever pivots. On some bikes, this sleeve needs to be transferred from the stock lever to the aftermarket lever. I would remove the lever bolt and see if there is a big gap between the lever bolt and the lever pivot. I apologize if this explanation is confusing. -DrewZilla
Can you tell me if i can connect the front and back brakes together so opperated by one leaver with equal braking force is this legal to do im in the uk.
According to the parts fiches I've found, Yamaha uses the same _1WD-H3922-00_ brake lever for both the 2016 MT-03 and R3. Therefore, you should be able to use the CRG Brake Lever for the R3 on your MT-03. -DrewZilla *www.revzilla.com/motorcycle/crg-rc2-brake-lever-yamaha-r3-2015-2016 *www.revzilla.com/motorcycle/crg-folding-roll-a-click-brake-lever-yamaha-r3-2015-2016
I personally like the CRG GP perch/lever, as it offers more adjustment than Accossato. -DrewZilla *www.revzilla.com/motorcycle/crg-gp-clutch-lever-and-perch
You don’t have to have a beard to wrench, and you definitely don’t have to be a man either! For some background, here’s Lemmy’s account of the history of the BSD: _“I love telling the story of it. I was sitting around the airport with some colleagues - among them were two of the co-founders of RevZilla. We were trying to come up with some way of quantifying how difficult something was, so I suggested how many BEERS it takes to get through a job. I was misheard, and it became BEARDS, which was funny because Mike C., one of our H-D geniuses, was present, and he has a wizard-esque beard. He laughed and liked it, and believe it or not, the outline of the guy you see in the graphic is actually the outline of Mike's head!”_ Hope this helps! -DrewZilla
+Kid Kawi Prices for the carbon fiber lever options are listed at the links below. -DrewZilla *www.revzilla.com/motorcycle/crg-carbon-clutch-lever-and-perch *www.revzilla.com/motorcycle/crg-carbon-brake-lever *www.revzilla.com/motorcycle/crg-carbon-clutch-lever
![[How To] Install Aftermarket Levers](http://i.ytimg.com/vi/w3MExdZdv6w/mqdefault.jpg)
I love CRG RC levers. I have them on my Buell. I have their bar-ends too. My Kawasaki is green. CRG doesn't offer a green adjuster so I went with Puig. They actually cost more. CRG and others need to add green to their color choices.
FYI the CRG long levers are still shorter than OEM levers
Damn, lol I just bought them. Thought they were the same. Thank you
I purchased a set of these levers thru you but was sent levers that don’t even fit my bike. I used the website and input my year, make, model, etc...but, for whatever reason, I was still sent the wrong levels. The original bolt won’t go thru the bore of the new levers. How do I refund or exchange?
Are the crg rc2 levers interchangable because i can only find the break lever for the crg rc2 on my ninja 650
Need adjustable levers for 87 Honda Rebel Cmx450c? No1 has any
Her fingers won't reach the levers!! I love the Halo, but no1 makes em for this bike. I need the levers closer to the bar/grips
my crg clutch lever is way harder to pull than my crg brake lever. is that normal
Would these for “22 Yamaha R7? Please let recommend me one. Thanks I’m advanced.
sam winchester works for revzilla?
Do they have these adjustable levers for cruisers? Yamaha vstar 650. Can't find it anywhere online whether i look for ASV, CRG, or Pazzo.
Nuts and bolts for front suspension
Where can I get replacement tips for them ?
Hey I have a question what are the numbers on the clutch levers bc idk if its my clutch but as my bike starts rolling it stalls so what's the numbers do
Hey man , just got a cbr600rr. Same shit is happening. I have a 1-6 setting on my levers. Did you end up figuring it out?
Am.about to order it now from ur website .. But I need to know if this lever will never effect and spoil the sensor of the cruise control for the s1000r bmw 2017?? Plz tell me before I.order it. Thanks for the video
This lever should not affect the cruise control sensor, so you should be good to order it. -DrewZilla
Hey there have you install the lever ? i wonder the cc and quickshift still working ? thanks and which model ure using. thanks
Any help? I switched to these recently and when I pull the clutch in and let go it doesn't pull back to original position it just stays and I have to push it back.
You may need to lubricate your clutch cable and/or check your clutch return spring. -DrewZilla
I just purchased these from your site. How can I adjust the clutch lever pull? My hand is dead after 10 minutes because the clutch is so hard to pull in. Any advice before I install?
Btw I have a 2003 CBR600RR
This might be due to bad grips
So you're saying the carbon levers aren't ideal for track? Seems a bit pointless to spend money on those kinds of weight savings for road use.
+Dan Read If your priority is weight savings, then I'd say they're perfectly fine for the track. If the priority is on-the-fly adjustment, then the RC2 Levers are the better option. -DrewZilla
Can I use for HONDA CBR250RR ,
I'm looking for a clutch lever, which could create lighter clutch.
what is the difference CRG clutch lever and clutch lever ACCOSSATO
Thank's
I believe Accossato levers are only for entirely replacing your stock lever and stock clutch perch. CRG offers replacement levers for stock perches as well as entire replacement clutch levers/perches. CRG does not have a replacement lever for your stock perch, but you may be able to use a full clutch lever/perch assembly. -DrewZilla
*www.revzilla.com/motorcycle/crg-sc2-clutch-lever-and-perch-assembly
What is the benefit having short levers?
+Elanas Šm. You might find shorter levers more comfortable if you normally only use two fingers to brake. Also, short levers are less likely to break if the lever hits the ground. Some also just like the look of short levers. -DrewZilla
+Elanas Šm. Yea its mainly if you like to shift with just 2 fingers so you dont smash your other 2 fingers trying to fully engage the clutch. And of course color style and function. Some have on the fly free play adjustment.
I’ve been looking for something to not smash my ring and pinkie finger.
I have small hands and have a bit of a struggle braking and blipping the throttle with 2 fingers on my 01 R6, would a short lever help? thanks
A short lever will give you less leverage, but you may be able to position a short lever closer to your grips for better modulation. -DrewZilla
You can also try Hogleverage.com Adjustable for larger and smaller hands.
Is this overkill if I just want black levers for my sportster? What is a better option for me?
These aren't really designed for Harleys. Instead, consider these affordable levers available in black. -DrewZilla
*www.revzilla.com/motorcycle/drag-specialties-hand-levers-for-harley
Hello everyone. New to motorcycling so excuse me if this is a noob question lol. Anyways, i bought a 2012 zx6r with crg rc2 levers already on it. I noticed that the brake lever is kind of loose also when i let off the brakes the brake light wont come off unless i push the lever forward. Is there any easy way i can fix this?
It could be an issue with the piston in the master cylinder or it could be that the CRG lever is missing a sleeve/collar that might sit between the lever's pivot and the lever bolt on which the lever pivots. On some bikes, this sleeve needs to be transferred from the stock lever to the aftermarket lever. I would remove the lever bolt and see if there is a big gap between the lever bolt and the lever pivot. I apologize if this explanation is confusing. -DrewZilla
RevZilla thanks ill check it out
is the price for a single lever or pair?
Its for each one. Go to their website it tells everything.
Can you tell me if i can connect the front and back brakes together so opperated by one leaver with equal braking force is this legal to do im in the uk.
It's technically possible. Some bikes already have linked brakes. However, we cannot speak to the legality in the UK. -DrewZilla
Hello revzilla , ive seen on your site that you sell a crg brake lever for the r3 , i own a mt 03 2016, i wonder if it will fit
According to the parts fiches I've found, Yamaha uses the same _1WD-H3922-00_ brake lever for both the 2016 MT-03 and R3. Therefore, you should be able to use the CRG Brake Lever for the R3 on your MT-03. -DrewZilla
*www.revzilla.com/motorcycle/crg-rc2-brake-lever-yamaha-r3-2015-2016
*www.revzilla.com/motorcycle/crg-folding-roll-a-click-brake-lever-yamaha-r3-2015-2016
It did its purpose no complains..
I'm looking for a clutch lever which could create lighter clutch pulling.
Which better between CRG GP lever and ACCOSSATO clutch lever?
I personally like the CRG GP perch/lever, as it offers more adjustment than Accossato. -DrewZilla
*www.revzilla.com/motorcycle/crg-gp-clutch-lever-and-perch
I don’t understand the beard scale you don’t even have a beard lol
You don’t have to have a beard to wrench, and you definitely don’t have to be a man either! For some background, here’s Lemmy’s account of the history of the BSD: _“I love telling the story of it. I was sitting around the airport with some colleagues - among them were two of the co-founders of RevZilla. We were trying to come up with some way of quantifying how difficult something was, so I suggested how many BEERS it takes to get through a job. I was misheard, and it became BEARDS, which was funny because Mike C., one of our H-D geniuses, was present, and he has a wizard-esque beard. He laughed and liked it, and believe it or not, the outline of the guy you see in the graphic is actually the outline of Mike's head!”_
Hope this helps! -DrewZilla
Man, it should be a beer scale !
Question what the function the brake can be folding?
In a crash, the lever can fold instead of breaking off. -DrewZilla
@@RevZilla thanks for the information
Great review, thanks !
Antoine Morin-Prévost Anytime! Thanks for checking it out!
Cool levers. BSD is Unix btw lol
How much for the carbon fiber shorty's?
+Kid Kawi Prices for the carbon fiber lever options are listed at the links below. -DrewZilla
*www.revzilla.com/motorcycle/crg-carbon-clutch-lever-and-perch
*www.revzilla.com/motorcycle/crg-carbon-brake-lever
*www.revzilla.com/motorcycle/crg-carbon-clutch-lever
I ordered a gold crg lever and it's not even close to gold 🤦🏻♂️ it's more like orange. So disappointed.
Will it fit yamaha mt15
That bike isn't sold here in the United States, so CRG hasn't tested fit with that model. -DrewZilla
Really Expensive!!!
3:46 you can see where the lever folding up as it is designed to do has rubbed off the paint already LOL shit advert
Pretty sure thats grease
It is grease
How embarrassing...for you!