I truly enjoy the videos and info you share to all of us. No lame music and talking just to hear yourself talk. There should be a go fund me page for you so you can get a concrete or asphalt slab put down, no more laying on gravel .
Allison trans have two filters. The spin on filter change interval is 30k miles. The internal filter change interval is 100k or during overhaul. Allison contracted with Castrol to develope TransSynd 668 ultimate synthetic atf for Allison transmissions. It's service life is 300k miles compared to dex3 or dex6 trans fluid 30k or 100k intervals respectively.
Excellent video. No music, no irrelevant BS, no stupid drunken banter, etc, just a proper, NO HACK process for doing the job, including the use of the torque wrench. Thank You. Later Allisons may be serviced with Allison Transynd TES 295. Need to check your owners manual to see what the transmission is supposed to be serviced with.
Nice how to video! A point to note though, according to Allison service recommendations, the sump filter should only be replaced at transmission overhaul.
Thanks for the video. Now got to crawl under my truck and do the same. Just wish it was as clean as yours under there! Looks a lot simpler than I was expecting. I will say it is only a two beer job.
Just an FYI apparently there was a transmission vent leak on many allison trans applications. They will blow fluid out the vent on the back top of housing on the left side. It's from a little design flaw or poor communication from Allison and the other manufacturers. The dipstick tubes need a vent, or remove the vent on the trans and extend it up higher at firewall etc. Possibly work to drill a hole in dipstick tube. Apparently there's TSB on it and random info in a search.
Part # 15115171 (Updated???)Transmission filler tube- has slot or holes at top #10-07-30-001A: Fluid/Oil Leak During Cold Weather from Transmission Vent #10-07-30-001B: Fluid/Oil Leak During Cold Weather from Transmission Vent (Early Models-Replace Transmission Fluid Level Indicator and Install New Transmission Vent Assembly) - (Feb 7, 2011) Subject: Fluid/Oil Leak During Cold Weather from Transmission Vent (Early Models-Replace Transmission Fluid Level Indicator and Install New Transmission Vent Assembly) Models: 2001-2011 Chevrolet Silverado 2500HD-3500HD Series 2001-2011 GMC Sierra 2500HD-3500HD Series Equipped with Allison® LCT 1000 Automatic Transmission (RPOs M74, MW7)
Thanks for this great video! Can I tell if my transmission fluid needs to be changed just with the color on the dip stick ? I bought the truck with 88 000 miles about 20 000 miles ago (1 year and half) and I know it has been super well maintained.
I am getting ready to change out filter and fluid on my LBZ Duramax. I do both once a year or every other oil change. I went on Allison's website to see the interval to change out the pan filter. Allison says to change pan filer only during overhaul so i never mess with it.
Nice video ! I’m a little confused though? Everywhere that I’m reading it says not to use the dextron? Use either the Mobil 1 delvac or the transynd. I’m even seeing the Castrol trans max . Mine is a 2007 Allison 1000 .
I have an 06 2500 with an Allison 1000 series. I'm throwing multiple codes for solenoid A, B, C, D plus the p0700. Also getting the" range shift inhibited " Any
On my 2007 GMC Sierra 2500, the manual says the operating temperature is between 185 and 210, but your video didn't show the temperature up that high. I also tried to drive to get the temperature up that high, and it only got to about 150 after over 1 hour of driving. I'm not sure what to go by.
A temp of 185 to 210 are the exact specs of your engine coolant temperatures, ome thermostat opens at 185 the 2nd opens at 210. The manual calls for the transmission to be 100 degrees above ambient air temperature outside. Like MrSubaru said just drive 20-30 minutes and you are good to go!
Shop towels I use are Wypall brand. BOX USA BPKW102 WypAll X80 Shop Pro Wipers Jumbo Roll, Pink (Pack of 475) www.amazon.com/dp/B01EYCNI3A/ref=cm_sw_r_cp_apa_nUKWAb41GB6XS
my Lb7 has 165,608 miles, i just bought it and i changed the spin off filter and its purple ? so i need to do this to my truck soon, it doesnt smell burnt ... and for 50,000 miles service, does that mean you have to go that every 50,000 limes ?
I prefered to drive the front onto 6x6" blocks saves lifting The trans oil from Allison is recommend. The one site said to put your foot on the brake and cycyle through the gears, as it drains more of the oil while still keeping the torque converter full.
Is it true that on an Allison trans, that the fluid should be checked while in neutral due to getting a false reading from transmission back pressure? Several videos show the neutral checking level.
The shop we took our RV to overfilled out Allison transmission 1000. What’s the best way to get some fluid out of there? Is there a fill plug that I can pump some oil out of? Or would it be okay to use the drain plug?
Yeah, both of my Dmax's have plenty room without jack or stands. And I have actually had a Camaro fall on top of me due to jack stands in dirt, not safe at all.! Shake test, jump test no matter, and you didn't see blocks behind the tires either.
This dirt is driven over daily with tractors, farm equipment, big trucks. It's extremely compacted. Never had an issue. I put 12,000lb+ tractors on jackstands out here without issue.
@@MrSubaru1387 That's what I thought too, until I accidentally hit the shift lever and the car came off the stands pinning me under the car. Luckily a buddy was nearby or I wouldn't be here today. Just be safe is all.
@@MrSubaru1387 I also know a guy that saved his buddy's life. They had jack a stand let go while doing exhaust work on pavement. The stud of the exhaust clamp punched a hole in his skull above his eye pinning him under the car until my friends dad could get the car off him, he was pretty messed up for a while. Be safe, always double triple check before getting under any vehicle. I no longer use Jack's stands to get under a vehicle, I use chunks of rail road ties & have a couple nice solid oak chunks to use.
Wow, just did this and drained out 11 L+ of fluid...only bought 2 gal of ATF as thought based on this it would take around 7...should i be worried? 01 2500hd with 5spd allison and 8.1L gas?
Good video, however the Snap-on torque wrench probably cost 4 times the whole transmission fluid change. Excellent video though 👍. Simple, straight forward and easy. Well done
Well if you use it alot that wrench pays for itsself. If you work on stuff for a living you quickly find out buying junk tools only puts you further behind.
@@calabschultz9648 Just because it's not Snap-on, doesn't mean it's junk. I don't know where this perception or use of phrase comes from. You know there are other good tools out there right? It's not just Snap-on and then everything else is junk. I've had a Craftsman set for over 20 years. I just rebuilt the whole front end of my 2500HD using non Snap-on.....no problem. When I was in the Navy working on jets and helicopters we didn't have Snap-on. I know they are nice tools but unless you are an everyday mechanic, (which you still don't "need") I see no reason to fork out that insane amount of money. Seriously, how many socket wrenchs' would you have to break in your life before Snap-on started paying for itself? 7...8? And I've only broken one so far and it was fixed for free. If you have the money and that's what you want to spend it on, well that's your choice. Please don't take this comment as sarcastic or demeaning or negative. This is just my thoughts now after having used tools for almost 30 years. Have a good one and good luck either way. And watch those knuckles 🤝
StriveFor Selflessness What I’m saying for a tech Snap on Mac and Matco typically work better fo using every day. The tools guy comes around once or twice a week and if you need a replacement sooner I can call and my snap on or mac guy and they will come same day. Not all of my tools are snap on and Mac. But the ones I use daily and need to rely on are. If you have ever done torque sequencing on some of these import motors where torque has to be done in steps. That electronic snap on torque wrench is really where it’s at. I have one and use it daily
@@csaleen302 Oh for sure, sometimes there are special tools that you absolutely need to get the job done and done right. I was more referring to the common tools. Sockets, wrenches etc. You can get the vast majority of tasks done with regular ol' tools. There is definitely something to be said for having the right tool for the job though.
Dang! You forgot to fill the new filter with trans fluid!!! That a fairly large air pocket that will starve parts for a short time after starting before the pump drives out the air void.
Absolutely the best Allison transmission service video on TH-cam. No talking, No product sales, just how to do the service. Thank you for this.
And no stupid over bearing music
Great video without “what’s up guys?” Nice job!
Awesome to see a good video without all the babbling! 👍👍
Thanks!
This is a really good good video. Don't need anything else to make it perfect. Great job.
Thank you for posting this. It works well without an audio narration, concise and to the point with the text!
You're welcome. 👍🏻
I truly enjoy the videos and info you share to all of us. No lame music and talking just to hear yourself talk. There should be a go fund me page for you so you can get a concrete or asphalt slab put down, no more laying on gravel .
Excellent video I just bought my first GMC Duramax it’s a 2002 and I’m looking forward to doing some of the maintenance myself thank you sir
Compliments to the mech. Dude knows how to make a how-to. Solid. Thank you.
Thank you for great no nonsense video. I now think I can do this work myself!
You're welcome 👍🏻
Great video, no BS, straight to the point! Thanks
Where is the overly loud music and non stop talking before the video? HAHA Awesome video and very clear cut video.
TH-cam perfection. Thank you for keeping it nice and simple and uncluttered. Subscribed.
Allison trans have two filters. The spin on filter change interval is 30k miles. The internal filter change interval is 100k or during overhaul. Allison contracted with Castrol to develope TransSynd 668 ultimate synthetic atf for Allison transmissions. It's service life is 300k miles compared to dex3 or dex6 trans fluid 30k or 100k intervals respectively.
Excellent video. No music, no irrelevant BS, no stupid drunken banter, etc, just a proper, NO HACK process for doing the job, including the use of the torque wrench. Thank You. Later Allisons may be serviced with Allison Transynd TES 295. Need to check your owners manual to see what the transmission is supposed to be serviced with.
You're welcome. 👍🏻
What a great video and info...I'm new to having a Duramax/Allison combo and this helped me a lot! Thank you!!
This is what all TH-cam how tos should be. Excellent job
Thanks!
Now that’s how a video is done!!
Excellent job, and thank you.
Excellent how-to video, probably the best I have seen. Thanks for the help!
You're welcome 👍🏻
The fluid you changed was so clean!
Wow no music or talking just to the point, great job man, keep up the good work👍🏻
Thanks for the video. Nice tools... Snap-On digital torque wrench.
Oh! One more thing. Thanks for the links to the tools & parts you used... big time help.
You're welcome. 👍🏻
Thanks for taking the time to make a good training video I will be very capable of performing this maintenance on my own.
Will be doing a video on this service on my 2016 Duramax; doing research at the moment; fantastic video to use as a baseline 👍
I liked the video as most did. Just do it! Simple to the point. Keep making videos we have the same truck. Thank you
Nice how to video! A point to note though, according to Allison service recommendations, the sump filter should only be replaced at transmission overhaul.
Excellent video. No Bs straight to the point and very informative
Great video. No yapping, business only.
Thank you for the video You just saved me $499
Love the video, just showing us how to do it with no BS! Thanks
I have to agree with the rest of the comments, great no nonsense tutorial. Thank you!
This is how videos should be! Awesome content
Thanks for the video. Now got to crawl under my truck and do the same. Just wish it was as clean as yours under there! Looks a lot simpler than I was expecting. I will say it is only a two beer job.
You're welcome. 👍🏻
Bad ass torque wrench
Thanks!
Good video, is there a reason you didn’t take off the external filter then take the drain plug out?
It's the best video ever! Thanks, I'm going to try it this weekend..
Great tutorial, do you know if this is the same transmission that comes in the GMC C6500 with the 7.4 gas motor?
Thanks a bunch, straight forward, pretty simple!
Excellent concise video. TY
Thanks the shop quotes over 300 I think I’ll do it myself save money and have some leftover for a nice torque wrench like that
Thanks for saving me $411. Some brothers that rhyme with "Sebastion" wanted to hose me over on this service.
Just an FYI apparently there was a transmission vent leak on many allison trans applications. They will blow fluid out the vent on the back top of housing on the left side. It's from a little design flaw or poor communication from Allison and the other manufacturers. The dipstick tubes need a vent, or remove the vent on the trans and extend it up higher at firewall etc. Possibly work to drill a hole in dipstick tube. Apparently there's TSB on it and random info in a search.
Part # 15115171 (Updated???)Transmission filler tube- has slot or holes at top
#10-07-30-001A: Fluid/Oil Leak During Cold Weather from Transmission Vent
#10-07-30-001B: Fluid/Oil Leak During Cold Weather from Transmission Vent (Early Models-Replace Transmission Fluid Level Indicator and Install New Transmission Vent Assembly) - (Feb 7, 2011)
Subject: Fluid/Oil Leak During Cold Weather from Transmission Vent (Early Models-Replace Transmission Fluid Level Indicator and Install New Transmission Vent Assembly)
Models: 2001-2011 Chevrolet Silverado 2500HD-3500HD Series
2001-2011 GMC Sierra 2500HD-3500HD Series
Equipped with Allison® LCT 1000 Automatic Transmission (RPOs M74, MW7)
Thanks for this great video! Can I tell if my transmission fluid needs to be changed just with the color on the dip stick ? I bought the truck with 88 000 miles about 20 000 miles ago (1 year and half) and I know it has been super well maintained.
I am getting ready to change out filter and fluid on my LBZ Duramax. I do both once a year or every other oil change. I went on Allison's website to see the interval to change out the pan filter. Allison says to change pan filer only during overhaul so i never mess with it.
Nice video ! I’m a little confused though? Everywhere that I’m reading it says not to use the dextron? Use either the Mobil 1 delvac or the transynd. I’m even seeing the Castrol trans max . Mine is a 2007 Allison 1000 .
Dude looks like a young Joe Thornton. Keep growing that beard guy
Great video, seriously. Is this what you recommend for any of the early 6.6 duramax? Like for an 07 LBZ?
I have an 06 2500 with an Allison 1000 series. I'm throwing multiple codes for solenoid A, B, C, D plus the p0700. Also getting the" range shift inhibited " Any
Great informative video 👍 Thanks 🏁 Lmm in Colorado 🤠
Great video! Thanks!
Great video. Thanks for sharing
I heard you're supposed to check it in neutral because park uses pressure while running
Thank you for the video. Very helpful. 🤘
The link doesn't show the price for that dandy SnapOn torque wrench. ;)
I read that Castrol Synguard is a recommended ATF for this transmission. Have you tried it?
Perfect!!!
Can u make a video explain oil pressure in the same vehicle , thanks
On my 2007 GMC Sierra 2500, the manual says the operating temperature is between 185 and 210, but your video didn't show the temperature up that high. I also tried to drive to get the temperature up that high, and it only got to about 150 after over 1 hour of driving. I'm not sure what to go by.
A temp of 185 to 210 are the exact specs of your engine coolant temperatures, ome thermostat opens at 185 the 2nd opens at 210. The manual calls for the transmission to be 100 degrees above ambient air temperature outside. Like MrSubaru said just drive 20-30 minutes and you are good to go!
Man I wish I had your torque wrench! And when do you buy your shop towels?
Shop towels I use are Wypall brand. BOX USA BPKW102 WypAll X80 Shop Pro Wipers Jumbo Roll, Pink (Pack of 475) www.amazon.com/dp/B01EYCNI3A/ref=cm_sw_r_cp_apa_nUKWAb41GB6XS
my Lb7 has 165,608 miles,
i just bought it and i changed the spin off filter and its purple ?
so i need to do this to my truck soon,
it doesnt smell burnt ...
and for 50,000 miles service, does that mean you have to go that every 50,000 limes ?
I prefered to drive the front onto 6x6" blocks saves lifting
The trans oil from Allison is recommend. The one site said to put your foot on the brake and cycyle through the gears, as it drains more of the oil while still keeping the torque converter full.
Is it true that on an Allison trans, that the fluid should be checked while in neutral due to getting a false reading from transmission back pressure? Several videos show the neutral checking level.
yeah put ebrake on and chaulk back tires. check fluid in neutral and it should be in between the hash marks.
HAHAHA, Justin Sharp is right ghost close the door in 00:32 seconds, By the way, it is a good tutorial video
Ghost confirmed at 00:32 door closing by itself. Spooky man
Haha, good thing the wind wasn't blowing. Wouldn't have spotted it if it was. :D
I have a 07 lbz have you done a Nsbu switch mines internal instead of outside out transmission
never mind thanks. for sharing that
good informative service how to video thank you
it is not necessary to change the internal filter every time .??
Awesome video. Does anyone know where I can find an online service manual for the GMC Sierra HD2500 series SLE with the 6.6L dual turbo Duramax? 🙇🏽♀️
Gracias amigo Great video
The shop we took our RV to overfilled out Allison transmission 1000. What’s the best way to get some fluid out of there? Is there a fill plug that I can pump some oil out of? Or would it be okay to use the drain plug?
I'd loosen the drain, you hand/arm might get soaked, but that's the fastest way. Just hold the plug to the hole, pull it down and back up quickly.
@@MrSubaru1387 Thanks, as always the best mechanic on YT.
GREAT video
Thanks! 👍🏻
Jack stand in the dirt is skeeeetch
Yeah, both of my Dmax's have plenty room without jack or stands.
And I have actually had a Camaro fall on top of me due to jack stands in dirt, not safe at all.!
Shake test, jump test no matter, and you didn't see blocks behind the tires either.
This dirt is driven over daily with tractors, farm equipment, big trucks. It's extremely compacted. Never had an issue. I put 12,000lb+ tractors on jackstands out here without issue.
@@MrSubaru1387
That's what I thought too, until I accidentally hit the shift lever and the car came off the stands pinning me under the car. Luckily a buddy was nearby or I wouldn't be here today. Just be safe is all.
@@MrSubaru1387
I also know a guy that saved his buddy's life. They had jack a stand let go while doing exhaust work on pavement. The stud of the exhaust clamp punched a hole in his skull above his eye pinning him under the car until my friends dad could get the car off him, he was pretty messed up for a while. Be safe, always double triple check before getting under any vehicle.
I no longer use Jack's stands to get under a vehicle, I use chunks of rail road ties & have a couple nice solid oak chunks to use.
thank you for no silly back ground music or talking....however I thought the internal filter dont need to be changed unless doing a rebuild
Great video
What year is your truck? Good vid, I love my Duramax!
2004, late. So first LLY.
@@MrSubaru1387 Same here,2004.5
Really really good video👍🏽👍🏽👍🏽
Great video!!!
I won't wear a watch when I perform this service !
I didn’t wear a watch when I watched this. Big deal dude.
Thanks for the great vid! What kind of watch are you wearing in it?
Watch is Timex Men's TW4B03500 Expedition Gallatin Black/Blue Nylon Slip-Thru Strap Watch www.amazon.com/dp/B0194LWDA0/ref=cm_sw_r_cp_apa_3WAEBbNCRJ3KD
MrSubaru1387
Awesome! Thanks for the quick reply!
You're welcome. 👍🏻
@@midamultitool1387 who gives a fuck about his watch
I had a international box truck and my Allison transmission is leaking just when is hot ,do you think I need to replace the gasket???
My truck has 253k and I don’t think it’s ever been serviced I want to do it but shoujd I even do it now?
Very good video thank you
Glad you enjoyed it. 👍🏻
I got 2003 Chevy 2500 hd duramax lb7 Allison transmision ; I was wonder if It is same pan bolt torque for that truck ?
Yup, same torque specs.
Only thing that would make it better, that I know of, would be to mention socket sizes-save a trip under the truck to find out....
Great vidio
Wow, just did this and drained out 11 L+ of fluid...only bought 2 gal of ATF as thought based on this it would take around 7...should i be worried? 01 2500hd with 5spd allison and 8.1L gas?
Was running and shifting fine, but figured it was time to change, and glad i did as fluid looked dirty
looked pretty clean.
Yea. No idea on when it was serviced. Just bought the truck. Service interval is 50k miles. Truck is at 150k.
Do you need to lubricate the gasket on the pan or leave it dry?
Nice video.Why do you not pre-fill the filter?How often do you change the filter?
Filter and fluid is supposed to be changed every 50k miles.
External filter every 20,000km, trans fluid every 80,000km.
How do you dispose of the trans fluid?
Always like to put the jack stands up front on Chevy trucks under the sway bar
Great video! Was that a shallow or deep internal transmission filter that you used?
I believe shallow.
Good video, however the Snap-on torque wrench probably cost 4 times the whole transmission fluid change. Excellent video though 👍. Simple, straight forward and easy. Well done
Well if you use it alot that wrench pays for itsself. If you work on stuff for a living you quickly find out buying junk tools only puts you further behind.
@@calabschultz9648 Just because it's not Snap-on, doesn't mean it's junk. I don't know where this perception or use of phrase comes from. You know there are other good tools out there right? It's not just Snap-on and then everything else is junk. I've had a Craftsman set for over 20 years. I just rebuilt the whole front end of my 2500HD using non Snap-on.....no problem. When I was in the Navy working on jets and helicopters we didn't have Snap-on. I know they are nice tools but unless you are an everyday mechanic, (which you still don't "need") I see no reason to fork out that insane amount of money. Seriously, how many socket wrenchs' would you have to break in your life before Snap-on started paying for itself? 7...8? And I've only broken one so far and it was fixed for free. If you have the money and that's what you want to spend it on, well that's your choice. Please don't take this comment as sarcastic or demeaning or negative. This is just my thoughts now after having used tools for almost 30 years. Have a good one and good luck either way. And watch those knuckles 🤝
StriveFor Selflessness What I’m saying for a tech Snap on Mac and Matco typically work better fo using every day. The tools guy comes around once or twice a week and if you need a replacement sooner I can call and my snap on or mac guy and they will come same day. Not all of my tools are snap on and Mac. But the ones I use daily and need to rely on are. If you have ever done torque sequencing on some of these import motors where torque has to be done in steps. That electronic snap on torque wrench is really where it’s at. I have one and use it daily
@@csaleen302 Oh for sure, sometimes there are special tools that you absolutely need to get the job done and done right. I was more referring to the common tools. Sockets, wrenches etc. You can get the vast majority of tasks done with regular ol' tools. There is definitely something to be said for having the right tool for the job though.
So how many quarts for oil?
why not pull the pan ?? is there filter in there
Great video, that's nice snapon lol
Thank you.
Dang!
You forgot to fill the new filter with trans fluid!!!
That a fairly large air pocket that will starve parts for a short time after starting before the pump drives out the air void.
😂 😂 😂 😂 😂 😂 😂 😂
Thanks for pointing that out. My Allison transmission failed on start up for that very reason. Very smart of you to notice.
Thank you for the extra information!
@@MrSubaru1387 is that sarcasm or truth?
@@MRW21783 💯 sarcasm. The transmission pump fills the filter and self purges air within seconds of starting the engine. These internet experts... 🙄
How many quarts of fluid does it take ?
I just subbed just because not a word was said