I love the versatility. I assume this is great for odd terrain the 12 or prime can't get into? You've got a piece of equipment for any situation. That's a true operation.
I love your videos. Consider zip-tying one end of the green extension to secure it. Then wrap 6 inch strip of tire tube around it a few times. Secure with a small hose clamp. Then when you plug it in, the connection is protected from water.
A good reason to have a tilt rotor setup, the joy sticks they give you come with a whole bunch of open buttons for things like that momentary you need for the flaps.
My throat is sore listening to ya! LOL I always thought it was odd that there is no real rating for magnets. In my guitar shop I use them for clamping odd shapes in/or odd situations. I bought a couple dozen in various sizes from the big luthier supply web. They are "rare earth" magnets, and they came with a warning card. Huh, real men don't read no warnings, and I promptly pinched the living hell out of one of my fingers!! 2 of them, the size of a dime, pinched my finger so hard blood squirted out across the room!! And hurt like hell!!! LOL Each magnet has a hole in the center, and I got these 2" round brass tube handles. A screw goes through the magnet into the handle. If I didn't have the handle's you couldn't get the magnet off of a flat surface!! Needless to say they make great clamps! Thin wood between 2 of them has no chance of moving!! LOL That sure is a purdy red truck sitting there in the wood lot!! 8) LOL --gary
I run an fae on a kx80 and this video makes it seem like its the same power while mulching. I was really hoping for more power running the head since I’m looking into purchasing one.
I have a video running this head actually on a job. Full boom function and double the mulching power. I have an 080 also. I don’t plan on mulching with it again after running a mulcher in a mec.
@@VBELTandSON awesome good info to know. If you were starting over and had a skidsteer and a brush cutter , would a mini excavator be your next purchase?
I’m sorry brother but that Prinoth on a kubota u55 makes all the rest of the small excavators look like toys.. yours is no different.. check out idigit4… not just picking on you but the one letsdig18 has on his yanmar looks like a toy also compared to the setup idigit4 has. And of course the kubota 55 don’t come close to hp of your machine.. guess that Prinoth head is just bad ass compared to the other brands…
Yes but make a video mulching with it and prove me wrong.. if you read what I said I did say your machine definitely has more power. But from the little intro you did mulching in your yard definitely wasn’t impressive.. maybe I’ll get to see what it’s able to do on a video later.. can’t wait for you to make one and prove me wrong.. if I’m impressed I’ll definitely want have any problems eating my words..
@@garybritt1209 you edited your original comment. And I’ve already made a video running the head. Runs it awesome. Best excavator I’ve ran this head on hands down. I don’t really feel like trying to argue the obvious with you. More power more flow more psi… maybe I’ll put in fast motion? And what machines do you own or have ran a mulcher head on?
![[LIVE] : ONE ลุมพินี 65 | คู่เอก "จ้าวเสือใหญ่ vs ผึ้งหลวง"](http://i.ytimg.com/vi/TDpOh5eEJKw/mqdefault.jpg)
That looks like the perfect thing to use when protesters shut down a freeway.
When your life depends on welds.b weld it your own dang self! Go Hoss!
Ya, you really want to show that piece of kit some respect! Perfect fit for the Mecalac.
Really love the way you guys come up practical, cost efficient way to get things done or make repairs.
Only way to keep small businesses running these days.
You won’t be around long in that game if you can’t do that.
Now that's awesome. She's a beast now with the mulcher head 😎 You and your dad make a great team 👏
I love the versatility. I assume this is great for odd terrain the 12 or prime can't get into? You've got a piece of equipment for any situation. That's a true operation.
I was really curious about that! thanks for taking the time to film and share!
I love your videos.
Consider zip-tying one end of the green extension to secure it. Then wrap 6 inch strip of tire tube around it a few times. Secure with a small hose clamp. Then when you plug it in, the connection is protected from water.
Nice set up, hope you get well soon. Thanks for sharing Sam👍🏻👍🏻👍🏻🇺🇸
A good reason to have a tilt rotor setup, the joy sticks they give you come with a whole bunch of open buttons for things like that momentary you need for the flaps.
Love the old multione - it’s looking a little tidier than mine 👍 Great bits of kit to have round the place.
Magnetics great idea for that there application
I think the 8 is gonna be a better fit for me but you guys have me pretty well obsessed with this machine now. We will see where it leads😊
That fits well good job guys 👍🏻
My throat is sore listening to ya! LOL I always thought it was odd that there is no real rating for magnets. In my guitar shop I use them for clamping odd shapes in/or odd situations. I bought a couple dozen in various sizes from the big luthier supply web. They are "rare earth" magnets, and they came with a warning card. Huh, real men don't read no warnings, and I promptly pinched the living hell out of one of my fingers!! 2 of them, the size of a dime, pinched my finger so hard blood squirted out across the room!! And hurt like hell!!! LOL Each magnet has a hole in the center, and I got these 2" round brass tube handles. A screw goes through the magnet into the handle. If I didn't have the handle's you couldn't get the magnet off of a flat surface!! Needless to say they make great clamps! Thin wood between 2 of them has no chance of moving!! LOL That sure is a purdy red truck sitting there in the wood lot!! 8) LOL --gary
Construction and fabrication never stop innovation 🇺🇸⚒️😎👍🤘💪
Heck yeah brother 👍👍
You guys are geniuses
Love the thumbnail picture man👍🏻
Ciekawe urządzenie 😊
I run an fae on a kx80 and this video makes it seem like its the same power while mulching. I was really hoping for more power running the head since I’m looking into purchasing one.
I have a video running this head actually on a job. Full boom function and double the mulching power. I have an 080 also. I don’t plan on mulching with it again after running a mulcher in a mec.
Semi fifth wheel concept 🇺🇸⚒️😎💪🤙
Drink a cup of raw potato juice to cure that voice.
What brand is that little tire loader that is awesome! Be great around the lot or shop!!
Multi trac. I don’t think they are a thing anymore. Avant is next best thing to make them now
How much flow does that machine have to the auxiliaries
37gpm 4,000psi 100hp
What dealer did you get your machine from?
Global machinery
Got a fae head on my Liebherr r914c and ist ripps like hell. Urs looks like fae on 3 to excavator haha, no front
Huh?
@@VBELTandSONgot no power
@@VBELTandSONor isnt it a forestry mulcher head?
@@whatyameann6573 please compose a sentence to which I can understand your statement or question. Thank you
@@VBELTandSONits fuckin weak in comparison to a Liebherr r914compact with a fae forestry mulcher
How do you like the mecalac? Better then a kubota?
Way better than any excavator of its size. Love the mec
@@VBELTandSON awesome good info to know. If you were starting over and had a skidsteer and a brush cutter , would a mini excavator be your next purchase?
Sounds like your getting run down. Take care of yourself, u getting older bro. Hoss good job on that weld. 👍🏻
Ain’t old yet
I’m sorry brother but that Prinoth on a kubota u55 makes all the rest of the small excavators look like toys.. yours is no different.. check out idigit4… not just picking on you but the one letsdig18 has on his yanmar looks like a toy also compared to the setup idigit4 has. And of course the kubota 55 don’t come close to hp of your machine.. guess that Prinoth head is just bad ass compared to the other brands…
My machines is twice the size of a u55 and double the hp. 🤷🏼♂️ kinda made me laugh.
Yes but make a video mulching with it and prove me wrong.. if you read what I said I did say your machine definitely has more power. But from the little intro you did mulching in your yard definitely wasn’t impressive.. maybe I’ll get to see what it’s able to do on a video later.. can’t wait for you to make one and prove me wrong.. if I’m impressed I’ll definitely want have any problems eating my words..
@@garybritt1209 you edited your original comment. And I’ve already made a video running the head. Runs it awesome. Best excavator I’ve ran this head on hands down. I don’t really feel like trying to argue the obvious with you. More power more flow more psi… maybe I’ll put in fast motion? And what machines do you own or have ran a mulcher head on?
What are your thoughts on the dodge frames breaking in half. I love ram and cummins, I can't really belive it lol
Ppl over loaded them in weird ways. Bad leverage on the rail popping them