I'm impressed by the improvement of the English text in the game. English isn't the developer's first language so in the earlier versions it had some questionable descriptions and tooltips.
Thanks to u I have been able to learn a lot about operating the reactor and the plant itself. I just need a little help. Can u make a video on how exactly the coolant, condenser, circulation pumps work and what the dials on each panel tells us about? Am not able to figure out where the coolant flows from and goes to... Thank you.
Use the valve panel in the Control Room and match up the valve names/numbers with the actual physical valves around the plant/facility? That may be a good small tutorial to go around and explain each gauge and what it does overall etc.? 🤔🤯👌
And a new update recently added a whole new floor to the facility. Now each loop has it's own turbine and the new floor was added to give room to these turbines. So maybe a new tour through the facility video?
I have many tutorials on my Channel for Nucleares but this would be the best and most up to date... from my seasonal playthough... th-cam.com/video/Sd8houvb2j4/w-d-xo.html
There's a dial on the fuel panel I believe, thermal efficiency, it's how much electricity you're generating from the heat produced. I also can't figure out how to drop the core inlet temperature to the green area any ideas?
That is the amount of fuel your using to produce the heat your making etc... Also with the core inlet temp, that is normal for it to be in the orange and hasn't changed since release ✌️ Thermal efficiency is reduced by lowering the Cores use or its temp... around 10-15 is probably the most efficient 1 can get currently at low power... Hope this makes sense and helps or answers your question 🤔😇✌️
@@ShArPy1o1Games another question haha. I can't find what to put into the back of AO to make it work, I have started a new game from scratch rather than the pre-installed pumps and generators.
@@ShArPy1o1Games I didn't get a chance to lose one yet haha lol. I have another question you might be able to answer, I couldn't find anything about this in the manual or steam guides...so for max power without melting rods you keep the core at 360...the description says operating range is 306 but that is inconsistent with the operation level indicator which seems to go off at around 328. And on top of that I have 10% higher thermal efficiency when running the core really cold around 220. Is there any advantage to running it higher than that if you don't have any problems delivering your quota?
I also didn't need any tutorial ingame bc youre videos explained it the best
Same lol
Apparently, not having the tutorial was making the game go negative in steam reviews 😭🤯
@@ShArPy1o1Games Thats sad bc its a great game 😢
Ikr
I think the best material to learn. Enjoy your voice tone, game knowledge, ability to explain. Thanks!
Cheers for the awesome feedback, hope to hear from you again 😎✌️
11:25 this is a PWR reactor, so there would be no D2O. The primary coolant would be demineralized light water if I’m not mistaken, just an FYI.
Oh really I thought all reactors similar to this used heavy water around the core directly 🤔✌️
I'm impressed by the improvement of the English text in the game. English isn't the developer's first language so in the earlier versions it had some questionable descriptions and tooltips.
Yeah, I have no doubt about that one as the save game .xml files are all in Spanish lol 🤣👌
Thanks to u I have been able to learn a lot about operating the reactor and the plant itself. I just need a little help. Can u make a video on how exactly the coolant, condenser, circulation pumps work and what the dials on each panel tells us about? Am not able to figure out where the coolant flows from and goes to... Thank you.
Use the valve panel in the Control Room and match up the valve names/numbers with the actual physical valves around the plant/facility?
That may be a good small tutorial to go around and explain each gauge and what it does overall etc.? 🤔🤯👌
And a new update recently added a whole new floor to the facility.
Now each loop has it's own turbine and the new floor was added to give room to these turbines.
So maybe a new tour through the facility video?
Yes I think its needed also... 😇👌
@@ShArPy1o1Games
When can we expect the new tour of the facility video?
In the new season... just trying to record heaps of episodes so I can release them all in 1 week all on the same patch 😇
Could you make a video based on how to shutdown the reactor? Or just explain it to me simply? Because the in-game tutorial didn't show me that
I have many tutorials on my Channel for Nucleares but this would be the best and most up to date... from my seasonal playthough...
th-cam.com/video/Sd8houvb2j4/w-d-xo.html
Just when Nucleares gets so many updates my pc broke down and i cant play the game
🤯🤯🤯🤯🤯🤯🤯😭😭😭😭😭😭
Try geforce now works on phone too
Thank you.
No probs... Enjoy 😇😎
hi, does the Compensator switch adjust steam flow? or turbine blades?
It steadies the increase and decrease of the power generated from the Steam turbines ✌️... easy mode in other words 🤣
do you want the condensor to be as cold as possible or is there a sweet spot? I.e 50C to have more efficency on steam generators
I like to keep it about 50c
But apparently colder the better
@@ShArPy1o1Games Thanks for the reply. Your videos have helped me so much. Keep up the great work.
How long do I need to change the fuel core? Or how can I know when to change?
When your control rods are nearly at 100% with practically no boric acid in the internal loop... aka, will last about 10-14 days in game ✌️
Love the content so far. How do we increase thermal efficiency of the plant? I can get to 10% but no further
I'm not sure what you mean? ✌️
There's a dial on the fuel panel I believe, thermal efficiency, it's how much electricity you're generating from the heat produced. I also can't figure out how to drop the core inlet temperature to the green area any ideas?
That is the amount of fuel your using to produce the heat your making etc...
Also with the core inlet temp, that is normal for it to be in the orange and hasn't changed since release ✌️
Thermal efficiency is reduced by lowering the Cores use or its temp... around 10-15 is probably the most efficient 1 can get currently at low power...
Hope this makes sense and helps or answers your question 🤔😇✌️
@@ShArPy1o1Games sweet thanks!
@@ShArPy1o1Games another question haha. I can't find what to put into the back of AO to make it work, I have started a new game from scratch rather than the pre-installed pumps and generators.
I have chemicals installed and olny use them as needed.
As long as your having fun... there is no wrong option 😇😎
Any idea what the blue and white bars in the HUD are for?
They are your licences to operate the plant... fail an audit... lose 1, lose them all and you will need to start again 🤯👌
@@ShArPy1o1Games I didn't get a chance to lose one yet haha lol. I have another question you might be able to answer, I couldn't find anything about this in the manual or steam guides...so for max power without melting rods you keep the core at 360...the description says operating range is 306 but that is inconsistent with the operation level indicator which seems to go off at around 328. And on top of that I have 10% higher thermal efficiency when running the core really cold around 220. Is there any advantage to running it higher than that if you don't have any problems delivering your quota?
Of course after I learned it myself by trial and error and some tutorials xDDDDDDD
Of coarse that's the case... but im sure you had fun learning it yourself?
Might have even done a better job? 👌🤣
@@ShArPy1o1Games Fun definitly, if you'd ask the company eh XDD
the game need co op
It did used to have coop but it broke a long time ago and I guess it's been put on the 'to do' list but forgotten about 😥🤔