It would be great to see more videos from you! I think you have a great voice and personality for this. Plus, your information is always immensely helpful 😊
The reason TH-cam is so messed up is the trending tab is full of the worst content ever created.. meanwhile I have to search out quality content like this. Thank you for this. I just subscribed and now I'm off to fix my z wobble.
Excellent information, outstanding delivery. You have excellent pacing, a great voice (very clear and pleasant to hear), and the information was concise + helpful + clearly well informed. I will be coming back to your channel any time my printers act up.
I whised every video would be as informative like yours. I dont care about the quality i just need information. and you brought it to the table like no one else. Going to check my printer now!
Interesting, but not a complete diagnosis. Sometimes z banding can be caused by humidity affecting the filament. Where it is exposed on the roll just on one side to a humid environment for a few days between prints. Or could be the filament itself having the issue. I buy the same filament twice and often find the second time, they've completely changed the quality. Amazon does this all the time. The sellers build up good reviews, then change products to something far cheaper and trade off the back of all the good reviews.
This was a great video. No annoying background music. No non-stop super fast speaking. No cutting every 2 seconds. Just you explaining your topic to the viewer. In great well paced detail i might add. I wish more content creators would follow your example. Though i guess they will hemorrhage tiktok addicted viewers with limited attention spans but content creators like yourself should not need to worry about that. You earned a new subscriber.
I knew it because I'm having that issue on my CR10 V3 where the lead screw was not square enough and still not because I hadn't time to finish to fix it. Thx
ive been having this problem but mine is a weird case. lets say I have a cube and a hole in the middle. now the strange part is that the z banding starts and ends at the top and bottom of the hole in the rest of the cube prints just totally fine
i mean u could always fix the z band problem as whole? just replace leadscrews with belts with high gear ration :) no more dependency on straightness of z screws and u can also have printer autoallign x gantry with them if u have dual motor z belt mod :)
Good advice, I was curious about this fault on my printer. It seems weird that Elegoo wants the top Z axis mounting hardware to be loose! Looks like a half stupid way of coping with Z wobble.
what if it's very very slight, like you can't even feel it on the prints you just see like a slight discoloration but it's perfect horizontal lines like that in the same place every print, but it's on a core xy printer?
Ball skew is over kill and is not needed useful it will properly give more artifacts, as it will be a component that's stronger than the frame it self therefor they will bend and warp the whole thing on a budget printer and the printer need to be setup right in any chase to deliver results anyway meaning correctly put to gather meaning adjusted and fine tuned no matter what the price range .
I need major help with me ender 3 v3 se. I can send some pics of my banding, i believe i am new to printing only about a month. I get great first layers but on the walls i have lines that look like steps. Now the first 20 or so print perfect then all of a sudden not so perfect
No worries. I get this question from time to time. I haven't raised crayfish in a while, but all my aquarium content is on my 2nd channel, "profiles aquatica"
![[TH] VCT Masters Shanghai Swiss Stage DAY 3 // FPX vs GEN | G2 vs TH](http://i.ytimg.com/vi/9lFnPhYhBIg/mqdefault.jpg)
![[TH] 2024 PMSL SEA W3D4 | Summer | ฮึดเข้าไว้ ถ้าอยากไปรอบไฟนอล](http://i.ytimg.com/vi/W0eoG-wrVVU/mqdefault.jpg)
This is not just a 'budget' printer problem.
It would be great to see more videos from you! I think you have a great voice and personality for this. Plus, your information is always immensely helpful 😊
The reason TH-cam is so messed up is the trending tab is full of the worst content ever created.. meanwhile I have to search out quality content like this. Thank you for this. I just subscribed and now I'm off to fix my z wobble.
Excellent information, outstanding delivery. You have excellent pacing, a great voice (very clear and pleasant to hear), and the information was concise + helpful + clearly well informed. I will be coming back to your channel any time my printers act up.
I could never get a brass nut that was tight.
So I finally went to a linear rail belt drive for the Z.
Glad I did.
Excellent video, I've seen a lot of videos addressing this issue, but most only talk about addressing the top of the lead screw or bent lead screws.
Thank you so much! Very clearly explained and great camera work :3
Excellent video! Straight to point with super explanations and great camera work as well.
Keep up the good work. Very intuitive and TO THE POINT. Great video friend.
Awesome video, have been trying to cure dual z ender 3 problems for ages, thanks
Very clear & concise explanation. Kudos.
Nice video, straight to the point and good examples.
I whised every video would be as informative like yours. I dont care about the quality i just need information. and you brought it to the table like no one else. Going to check my printer now!
Great video, i learn something new every day.
I only have slight Z banding and have been looking at the Wobble X device to fix this issue, it seems to be a very clever device!
Interesting, but not a complete diagnosis. Sometimes z banding can be caused by humidity affecting the filament. Where it is exposed on the roll just on one side to a humid environment for a few days between prints. Or could be the filament itself having the issue. I buy the same filament twice and often find the second time, they've completely changed the quality. Amazon does this all the time. The sellers build up good reviews, then change products to something far cheaper and trade off the back of all the good reviews.
Great video. I didn't know how to describe the artifacts on my prints. It is Z BANDING! Thanks to your video, now have a plan to resolve the issue
Thank you so much!
This was a great video.
No annoying background music.
No non-stop super fast speaking.
No cutting every 2 seconds.
Just you explaining your topic to the viewer. In great well paced detail i might add.
I wish more content creators would follow your example. Though i guess they will hemorrhage tiktok addicted viewers with limited attention spans but content creators like yourself should not need to worry about that.
You earned a new subscriber.
mans is professional af thee entire video and then hit us with the shwifty at about 6 mins in lol.. you got a sub from me today bro
I’m still trying to figure out why he air quoted perfect.
lol made me rewatch the whole thing @@SeattleShelby
I knew it because I'm having that issue on my CR10 V3 where the lead screw was not square enough and still not because I hadn't time to finish to fix it. Thx
you are a wizard =, to the point right out the gate, explanation, and fix
ive been having this problem but mine is a weird case. lets say I have a cube and a hole in the middle. now the strange part is that the z banding starts and ends at the top and bottom of the hole in the rest of the cube prints just totally fine
i mean u could always fix the z band problem as whole? just replace leadscrews with belts with high gear ration :) no more dependency on straightness of z screws and u can also have printer autoallign x gantry with them if u have dual motor z belt mod :)
great topic, thanks 👍
How do you feel about the Belt Drive Z Axis mod? In theory, it should also mitigate Z-banding, right?
Good advice, I was curious about this fault on my printer. It seems weird that Elegoo wants the top Z axis mounting hardware to be loose! Looks like a half stupid way of coping with Z wobble.
This video is great, thank you
what if it's very very slight, like you can't even feel it on the prints you just see like a slight discoloration but it's perfect horizontal lines like that in the same place every print, but it's on a core xy printer?
voce tem meu like! e minha inscrição.
Ball skew is over kill and is not needed useful it will properly give more artifacts, as it will be a component that's stronger than the frame it self therefor they will bend and warp the whole thing on a budget printer and the printer need to be setup right in any chase to deliver results anyway meaning correctly put to gather meaning adjusted and fine tuned no matter what the price range .
I need major help with me ender 3 v3 se. I can send some pics of my banding, i believe i am new to printing only about a month. I get great first layers but on the walls i have lines that look like steps. Now the first 20 or so print perfect then all of a sudden not so perfect
thakns bro,really thanks🙏🙏🙏🙏🙏🙏
does this happen if i’m printing on a wobbly desk (ender 3 max neo)
Mine looks similar but it’s very inconsistent and different. I have a creality k1 max and it’s got 3 lead screws
I had something similar on my KP3S. It turned out that the Z axis motor had a bent shaft.
Another very common is the bending of the lead screw.
I’m having something similar to z banding but the lead screw isn’t wobbling so I don’t think it’s z wobble anyone have any ideas ?
Gold
What would it take to talk you into re-narrating all the audio books I have? At least you need to make a video about how to make videos.
Great video! Thank you!
Does this apply to z wobble with linear rails?
Yes
Great explanation thank you!
Random question but are you still raising crayfish?
No worries. I get this question from time to time.
I haven't raised crayfish in a while, but all my aquarium content is on my 2nd channel, "profiles aquatica"
My man great video, but if I may, it gets tiring/annoying the noise on your mic, it's beyond normal. Thnks, take care
how would you fix the non 90 degree x gantry mount
z banding or z binding??😂