I'm just a "virtual farmer"; play Farming Simulator 2017. But has - for whatever reason - really got me into liking farming equipment/tractors - and watching these types of videos. Glad to have come across your channel.
Fascination of modern agriculture meets cinematography. And if you watch a movie, both of this two kinds of technik get together and you thing you get an impression of how it works and how it feels, than you are definetly on the right channel. - Tractorspotter
Paul Baluk I think it looks over complicated for what it is. I usto run a heath super chaser extra with a different lifting carriage and it was a lot simpler design and worked really well if I can find the video with me in it I will try link it into another comment
I can’t work out how to do it. Search heath super chaser extra working alongside 3 newholland bb9090 plus bailers should bring it up the song in the background is don’t stop
normally im not into this kind of stuff but thanks to technology, and simulator's it peeks my interest in the real stuff....so thanks for uploading these videos mate
i wasnt the only person who noticed the engine rpm then, thats a hell of a system in that tractor, iv allways been use to 540/1000 at 1900rpm or 540 at 1500.
i guess becouse that baler have 54 knifes that chop the straw in to 5 cm pieces. a baler that just made bales could be pulled by a weaker tractor,, but then they had to use a stronger tractor later chopping up the bales later if they needed it for say laying a thin fluffy layer of bedding.
@@carlolson9257 Thats the most yellow hay i have ever seen, hehe But they say in the video that that the baler use 54 knifes to chop it up,, + the krone baler have a heavy flywheel that a tiny tractor would struggle just to start since the whole baler is driven thru the PTO SHAFT.. The flywheel just take the tops of the pressure when the piston that compress the chamber need max pressure. but if you removed the knifes i guess a smaller tractor might have been able to pull it, just a bit slower. making uncut bales. where say the feed mixer wagon did the chopping
Jack White it is called “dorshooi”. The hay that is left after harvesting grass seed. It is usually not used as feed, but for example as animal bedding.
The crop cutter of the baler can't handle any faster speed within this hay, maybe in straw you can drive a bit faster. But your right, 500hp is a bit to much for this baler as it only requires around 300/350 hp.
No matter what the technology, every bale needs to "sit in a paddock" and be handled several times before it reaches long term storage due to its bulk. Maybe that extra horsepower (500 HP) can be used to pull a full sized (20 ft) shipping container & handling system that slides directly onto road transport waiting adjacent to the paddock with a fresh empty container to swap for the full one.
thunder12121 Wow thats super fast! But ya that’s what I am used to with the Hesston big square balers as well, not quite as fast though! Worked in the service dept of a New Holland and later on a AGCO Massey and Hesston dealership for 20 years.
love baling videos. i would like to see some nice case magnum tractors doing this job, allthough the 1050 fendt ist the best tractor in this hp category in my opinion
Thanks for the video will this stuff be used for feed is that why you're cutting it. How long does the knives last in the machine. Have a great afternoon
Thanks! Yes, this will used for cattle and horses to feed during winter. Not sure how long the knives last, it depends also what kind of crop you are baling, in grass and hay the knifes wear out much faster then straw for example.
The new technologies in agriculture have truly changed the way we work on the farm. Thank you for introducing these advanced machines!"
I'm just a "virtual farmer"; play Farming Simulator 2017. But has - for whatever reason - really got me into liking farming equipment/tractors - and watching these types of videos. Glad to have come across your channel.
گ گگگگگننگ
@@مهریعباسی-ف3م ammehoela
Fascination of modern agriculture meets cinematography. And if you watch a movie, both of this two kinds of technik get together and you thing you get an impression of how it works and how it feels, than you are definetly on the right channel. - Tractorspotter
Thank you for your kind comment, this is exactly the reason why I share my video's for.
Fendt tractor and v rack
This makes my panty moist. I am wearing very tight Finnish thong but still.
I am seeing these machines for the first time otherwise I have only played the game with these machines.👍
The Heath Super Chaser is the star of this video.. holy moly is that ever a versatile but simple machine!
Paul Baluk I think it looks over complicated for what it is. I usto run a heath super chaser extra with a different lifting carriage and it was a lot simpler design and worked really well if I can find the video with me in it I will try link it into another comment
I can’t work out how to do it.
Search heath super chaser extra working alongside 3 newholland bb9090 plus bailers should bring it up the song in the background is don’t stop
th-cam.com/video/w8ktgSKNNrU/w-d-xo.html
I
The best farming videos on TH-cam, very interesting to watch how other farmers approach the same problems all farmers have.
4:40 how did it not lag when he is close to bale pile
man it's irl
Speriamo che il nostro pianeta possa reggere questi ritmi, sempre piu grandi, e , giganteschi ,queste macchine ,!!!
Another great video. I love how the bale stacker offsets the top row for stability. Genius.
Wow is that tractor big! I didn't think you could make one of these balers look small but this thing makes it look like a little toy.
Amazing video, love it Krone and Fendt together what a perfect combo, have a Krone just need a Fendt yet 😁
The 1050 is a thing of beauty. Every time I see it it brings a smile to my face which is weird because it's a tractor 😂
Fantastic beautifull fendt and krone
Great video- that Fendt is barely breaking a sweat
Leuke video hopelijk nog veel meer van deze content!
Fendt& Krone = German Engineering 💪🏻💪🏻💪🏻💪🏻
👍👍👍👍🇪🇺🇹🇷
Nice video. I like FENDT Tractors 💪
I'll
Fendt + krone = great duoDuo👍
Nice! - and finally video created with (good) music stopped when points of interest are present. -well done!
The tractor and baler are a nice looking rig
Fendt 1050 😍Dream Machine 👌🏻👌🏻
Great video Tractorspotter !
Ultra haute précision mécanique top et terriblement excellent et dément top botteleuse
Wow farming simulator has improved a lot. It looks realistic
Ur joking ayyy
@@cody_gsy_4586 😂😂
I must say that the quality of your videos is just outstanding
Its hard to imagine intensive agriculture without diesel, but that's what needs to happen.
Farming simulator real life🗡️
Fs 50
All l could say is that the great people doing the great job.
The trailer for lifting the bales is pretty clever engineering.
It is. But nothing! compared to whats going on inside a baler or a combine which has to be the most complex agricultural piece of equipment invented.
There's no way in hell that someone, better yet two of the world strongest people could lift those.
Jim's videos me my dad and my uncle made one of them took us 6 months lovely piece of kit very complex
Cameron Kinnan me and me dad can move them square bales around
@@cameronkinnan6697 have you ever seen a World Strongest Man Competition? Those guys are wildin.
Wat is eigenlijk de maximum werksnelheid van zo’n balenpers. In farming simulator is dat 20 km/h maar hier zag ik volgens mij 6 km/h staan.
Nice video, some very nice kit!!
Prachtige video! Hele mooie Fendt 1050! Mooie machine ook om de balen op te halen!
Dankje! De verzamelwagen maakt het filmpje complet inderdaad.
Nice Your Channel and All Machines
Best tractor channel on youtube 👍
11111111334и
Mooie video van een prachtige combinatie!
Amazing video quality!! Keep up the good work
Great video, i have also tested the Fendt 1050, check it out with Horsch 5mt
th-cam.com/video/47B8tMzuKDQ/w-d-xo.html
@@DorianIB это новый шл9шдт8г
normally im not into this kind of stuff but thanks to technology, and simulator's it peeks my interest in the real stuff....so thanks for uploading these videos mate
Mooie vangst Martijn. Ontzettend gaaf om te zien 😊
Fa. Plaatsman jij heb gelijk like
Very powerful tractors which make agriculture easy
Very nice vidéo and very good mounting
This Fendt looking good
BORN FARMER AND I WILL DIE FARMER 💪🏻♥️
Fendt 1050 on a bailer? Overkill much?
Nothing runs like Deere 🔥❤️
Being chased by a fendt
Fendt 👎👎😆😆
Very nice tractors. The Fendt 1050 Vario is impressive.
How many weight that big square baler
Just think about how amazing that engine performs and how smooth it runs; at just 1300 rpm it’s already capable of delivering 440 horsepower.
i wasnt the only person who noticed the engine rpm then, thats a hell of a system in that tractor, iv allways been use to 540/1000 at 1900rpm or 540 at 1500.
@@ivgotballsofsteel4048 lulu
Awesome as always.
AWESOME amount of work. And still have time to go fishing...
Ausomete l-am adus de la Vâlcea ce spate vezi așa ceva este real
Is that hay or strraw
Why are they using a 500 horse power tractor for baling hay?!?!
i guess becouse that baler have 54 knifes that chop the straw in to 5 cm pieces.
a baler that just made bales could be pulled by a weaker tractor,, but then they had to use a stronger tractor later chopping up the bales later if they needed it for say laying a thin fluffy layer of bedding.
@@samkom33 that's not straw thats hay
@@carlolson9257 Thats the most yellow hay i have ever seen, hehe But they say in the video that that the baler use 54 knifes to chop it up,, + the krone baler have a heavy flywheel that a tiny tractor would struggle just to start since the whole baler is driven thru the PTO SHAFT.. The flywheel just take the tops of the pressure when the piston that compress the chamber need max pressure.
but if you removed the knifes i guess a smaller tractor might have been able to pull it, just a bit slower. making uncut bales. where say the feed mixer wagon did the chopping
@@samkom33 good point I forgot the part about the knives
A 350 hp tractor would probably be able to do that too
Why do you need 500 hp for a bailer if you can get a bailer that does the same for 180 hp
Do you know what kind of combine did the harvest? (shaker or rotor)
I'm from India . driving this type of tractor is my dream 😍😍😍
Soham Gaikwad go in Europe. Germany/France
Spartiate Leonidas 👍👍
Spartiate Leonidas where are you from
France
Spartiate Leonidas ok and thanks for reply
awesome video!
Super video
It looks like straw to me. Someone please clarify. Great video. Love Fendt tactors!!!
Jack White it is called “dorshooi”. The hay that is left after harvesting grass seed. It is usually not used as feed, but for example as animal bedding.
Comment se fait -il que il tourne à très bas régime moteur ? 1300 tours min c'est vraiment très bas pour faire tournée une presse à bottes carré.
Selon quelqu'un d'autre le tracteur est une taille trop grande mais c'était le seul disponible.
Mooie video tractorspotter!
Goeie vangst Martijn!
Dankje Mike!
J'adore tes vidéo je les regarde toute 😁
Maak jij videos door heel europa of gwn in nedeland
john deere
Dit is wel stro, maar oké
Wel mooie beelden!!
Dit is graszaadhooi ;-)
Hay or straw? Looks like straw to me.
Is that going for cattle feed or sheep ?
Mostly for cattle and horses.
good work
Echt sehr sehr schönes viedo
Agratechnik Bad Essen katerpile
Takoj
katarina k bitte
Very Good-
You can feel this experience in FS14 game
In FS20 also.
Super mooie vid!!
The tires just need to be feather apart ah? Can he not drive faster seeing that 1050 Fendt has 500 hp?
Tires are spaced for road travel and you can only go as fast as the baler's pickup will feed the crop in. Any faster and you'll plug the baler.
The crop cutter of the baler can't handle any faster speed within this hay, maybe in straw you can drive a bit faster. But your right, 500hp is a bit to much for this baler as it only requires around 300/350 hp.
No matter what the technology, every bale needs to "sit in a paddock" and be handled several times before it reaches long term storage due to its bulk. Maybe that extra horsepower (500 HP) can be used to pull a full sized (20 ft) shipping container & handling system that slides directly onto road transport waiting adjacent to the paddock with a fresh empty container to swap for the full one.
th-cam.com/video/xcinN5sUoX0/w-d-xo.html
thunder12121 Wow thats super fast! But ya that’s what I am used to with the Hesston big square balers as well, not quite as fast though! Worked in the service dept of a New Holland and later on a AGCO Massey and Hesston dealership for 20 years.
reichen da die pa PS schon aus?! :;DD
love baling videos. i would like to see some nice case magnum tractors doing this job, allthough the 1050 fendt ist the best tractor in this hp category in my opinion
Marco Scheider You probably won‘t see a magnum running at 1300 rpm in front of the baller
This is beauty
How high is the fuel consumption of the Fendt 1050?
Oscar Johansson Probably very low compared to other 500 hp tractors. As you‘ve seen, they run this giant baller with “just” 1300 rpm.
This is bale tool
This is monster
Awesome 👌
I love look of this new Fendt tractors.
This grass looks extremely dry. Why would you cut hay so short?
And have they done it before the storm? :)
Because straw and hay aren't the same thing :)
How much are the bales? €€
Valtra and fendt the best💪😀
نتم تعلمون الناس على صناعات ذا كانت سيارات و قلابيات و كل الالات الثقيلة والخفيفة والجرارات الزراعية وا ني اشكركم على هذهي الصناعات العالمية
qe divertid☺😊
Каждый раз смотрю и каждый раз удивляюсь .
valla helal olsun makinalar efsane
just saying thats not hay its straw
Great Video !
Beautiful video end :)
ص
Wonderful
Thanks for the video will this stuff be used for feed is that why you're cutting it. How long does the knives last in the machine. Have a great afternoon
Thanks! Yes, this will used for cattle and horses to feed during winter. Not sure how long the knives last, it depends also what kind of crop you are baling, in grass and hay the knifes wear out much faster then straw for example.
Très jolie plan
music name?
very good
Geniale Videos.
A 1050 seems a bit much for a baler, but OK. Nice video!
Very very nice, thank you
Super mooi
I like to play farm simulator bcoz of this
Belle vidéo
Fendt is the best i hafe a 1050.
Who here thinks that Krone balers should be in Farming simulator again!?