How to Remove Axle Bearings DIY
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Get the Axle bearing Pullers here amzn.to/3pHy45c
Get a Slide hammer here amzn.to/38ID3MQ
In Canada get a Axle bearing Puller kit here amzn.to/3np7kUY
In Canada get a slide hammer here amzn.to/2Kd9Tv5
Need to Pull axle bearings ? this tool will work on pretty much all axle tube bearings for removal. without this tool it maybe difficult to remove the bearings. All you need is a slide hammer and the axle bearing removal tool. takes about 2 minutes and they are out.
DISCLAIMER: Due to factors out of the control of Bullshitkorner and Bsk Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Bullshitkorner and Bsk garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video and all other videos produced by Bullshitkorner and Bsk Garage. Use this information at your own risk. Bullshitkorner and Bsk Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Bullshitkorner and Bsk Garage Be safe! This video and description contain affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Hey Jerry just a piece of information. Wrap a towel tightly around the weight on the slide hammer. Squeeze the ends of the towel and fling away. I do that with the slide hammer all the time so it doesn't beep my hands up. I was the guy that said use a rag take off a window crank clip. Thanks for another video.
1:42 I am pretty good at that Motion I got this!
a little heat with heat gun to warm up the axle tube to remove ... and reinstall the COLD been in freezer all night new WELL GREASED wheel bearing. overfill the differential with a rag over the hole to make sure the wheel bearings and pinion bearings get plenty of oil... change new gear/differential oil in ...500 miles with fresh synthetic ? oil? RED THREAD LOCK ON THE RING GEAR BOLTS... after the bolts and the holes in the ring gear have been cleaned out with BRAKE CLEANER to get all machining oil out of the bolts/holes so the RED THREAD LOCK will have clean metal to grab a hold of. 55 ft LBS... ring gear bolt torque... on GM 10/12 bolt.... Ford 9" too???? more for bigger bolts on bigger ring gears/diffs
Love the quick tip vids!
I just grab them with my index finger and pull them out.
No tf you do not 😂 that’s not possible!
I watched 3 or 4 vids on this and no one ever says the weight of the slide hammer they're using.
Any weight…. Why does that matter just use one…