Thanks for comparing MixEffect with the Rodecaster Video! With regards to pausing VFA when using manual cuts, you can specify certain input sources within each VFA trigger to prevent auto-switching. Now, this wouldn't have worked with your three cameras, but if you had a fourth, screen share, or other input source you wanted to cut to and hold, you can do this via MixEffect. VFA in MixEffect also allows you to set how long you want to hold before allowing another VFA trigger to run.
Thank you so much for making this video! This just popped up in my subscriptions and I’m really looking forward to watching. I’ve really been hoping you’d make this!
The single greatest improvement for the Rodecaster Auto Switching would be to add the ability to set the min and max seconds for a wide shot as an option, that seems to be a super easy fix and it would greatly improve the switching.
Great video, Aaron Parecki. Looking forward to your next upload! I smashed the thumbs up button on your content. Keep up the fantastic work! Your comparison of the auto switching features was incredibly insightful. Have you found any limitations with the Mix Effect app in terms of latency during live switching?
@AudioHotline Cani i connect the SAME pc that i control the "RODECaster Video" with through the HDMI for it to be another video input? Or do i need another PC for like web, slides and general things? I only want to use 1 PC in the setup & have that PC show up as an HDMI input.
Great comparison. Very difficult to decide between the the RØDECaster Video vs ATEM Mini Pro ISO + RØDECaster DUO. I am planning on doing a Video Podcast and I think the RØDECaster Video would be great.
Thanks for making this video. Is It possible to make This work in my setup. I have 3 camera's with hdmi going into the atem extreme ISO. The Rodecaster pro 2 connects my microphones and I use a sound cable to export the sound from. The RCP into my ATEM extreme ISO. So This is a stereo sound and not a seperate one.
@@michaelzavala Correct, you would need to send the mixing board audio as separate channels to the ATEM. You can do this by routing audio to the additional mic or embed into the HDMI/SDI inputs. You can still use VFA with disabled audio outputs.
![ULTIMATE 4k Streaming Device & Switcher - Here's WHY!? [feat. Yolobox Ultra]](/img/n.gif)
Thanks for comparing MixEffect with the Rodecaster Video! With regards to pausing VFA when using manual cuts, you can specify certain input sources within each VFA trigger to prevent auto-switching. Now, this wouldn't have worked with your three cameras, but if you had a fourth, screen share, or other input source you wanted to cut to and hold, you can do this via MixEffect. VFA in MixEffect also allows you to set how long you want to hold before allowing another VFA trigger to run.
Great tip! That's perfect for switching over to a screen share!
@@AdamTow why do I not see this on my mix effect
@@gamerfirst238 Switcher needs to support Fairlight audio. Older ATEM switchers that don’t will not support VFA.
Thank you so much for making this video! This just popped up in my subscriptions and I’m really looking forward to watching. I’ve really been hoping you’d make this!
Extremely helpful vidéos, I bought both to try it out myself, if I had seen your video I wouldnt have had to do that lol
The single greatest improvement for the Rodecaster Auto Switching would be to add the ability to set the min and max seconds for a wide shot as an option, that seems to be a super easy fix and it would greatly improve the switching.
Great video, Aaron Parecki. Looking forward to your next upload! I smashed the thumbs up button on your content. Keep up the fantastic work! Your comparison of the auto switching features was incredibly insightful. Have you found any limitations with the Mix Effect app in terms of latency during live switching?
Adam's software demonstrates what an ATEM is capable of that for some unexplained reason BlackMagic Design has declined to take advantage of.
@AudioHotline Cani i connect the SAME pc that i control the "RODECaster Video" with through the HDMI for it to be another video input?
Or do i need another PC for like web, slides and general things?
I only want to use 1 PC in the setup & have that PC show up as an HDMI input.
Great comparison. Very difficult to decide between the the RØDECaster Video vs ATEM Mini Pro ISO + RØDECaster DUO. I am planning on doing a Video Podcast and I think the RØDECaster Video would be great.
how did i just learn about the atem mini extreme pro iso Auto switch hehe, also question which cameras are you using? great video as always, thank you
Thanks! For live broadcast use-cases including IMAG, how is the latency with Roadcaster Video?
Thanks for making this video. Is It possible to make This work in my setup. I have 3 camera's with hdmi going into the atem extreme ISO. The Rodecaster pro 2 connects my microphones and I use a sound cable to export the sound from. The RCP into my ATEM extreme ISO. So This is a stereo sound and not a seperate one.
No, you'd need each audio channel sent separately into the ATEM to do the auto switching with the MixEffect app.
@aaronpk and how do I do that?
@@aaronpk same question here , Atem mini pro iso + Rode Caster Pro 2 + Mix Effect
The problem with the ATEM is that you can’t send a mixed audio feed and to VFA right? If there a good way to send mics to both the mixer and ATEM?
@@michaelzavala Correct, you would need to send the mixing board audio as separate channels to the ATEM. You can do this by routing audio to the additional mic or embed into the HDMI/SDI inputs. You can still use VFA with disabled audio outputs.