If they have a built-in magnet, they interfere. I have one, and it makes spaces wine I write. Also, most are weak magnets, only strong enough to attach a wireless charger, not for a stand, wallet, or car mount. Pretty crappy.
@@nigel-uno While I can't speak to that, I will say that some of the top picks seem to get pretty bad reviews. Are they mostly good, sure, but there are enough really bad experiences that I have to question how helpful this video actually is. On Amazon, checking the Motive store, I see no Life Proof case, but they do have a Bunker series, which they claim is their toughest case. Upon checking, out of 29 ratings, 22% gave a one star review. If that's their best case, I have strong doubts about the others. Looking at several other cases listed in the video as top picks, I'm not that impressed. Included face covers tend to suck and not allow fingerprint ID. Many do not include actual protection for the camera lenses. The video covered a lot of ground, so I give the creator credit for all the work put in. I just can't say I'd rely on the suggestions at the end.
2:35:20 About that kickstand case. The metal kickstand makes the case (and the phone) top heavy. It feels much heavier in hand when you hold the phone by the lower part
Maan, I bought about 10. cases for the S24U most of them going back. Out of all of them the Torras cases are the best ones. The fit is so perfect where you won't see the titanium frame peeking out like most of the cases I bought . I feel like a lot of these manufacturers used a S23U mold and every body just copied and pasted it.Its seems like they were meant to protect the side rails of a curved screen . Because most of these cases I bought the sides are lower than the screen and the titanium side frame peeks out and it's not even through out I don't know what material Torras uses, if it's TPU or not but it's also the most dense and hard material out of all cases I bought. Another major worthy mention is the Torras diamond shield screen protector. The finger print scanner works absolutely flawlessly. it works exactly as if there isn't a screen protector on there . Same exact pressure is needed if there is the Torras screen protector on it or not. This is a long review but it's exactly what we needed because there are too many cases to research. Thanks!
@@quang6474 not with the magnet on the case it self with no magsafe accessory attached to it. Now depending on the strength magnet of the accessory you are attaching to ( magsafe wallet , car mount) you will get interference using the spen. So no just with the case it self with the magnetic halo ring it does affect the use of the spen.
Amazing. I had dbrand previously and tried the Ringke Fusion bold with the clear frosted back. The added grip on the sides along with the frosted back that shows off the titanium blue while keeping smudges to nearly 0 is a win. Really appreciate this video!
Thanks for your thorough and informative reviews. Is the screen protector that comes with the Poetic Spartan as protective from cracking as 9H glass? Or would you recommend getting a separate screen protector? THANKS!!
Great video. I checked every single link, sorted by desired colors, then went back to your reviews. Got the slimmer of the Poetic series in bright orange. Thanks for the great compilation!
2:15:25 Had the Spigen Tough Armour on my S20+ since launch day, phone survived many nasty falls. Back of case got a crack, and it still protected very well. Phone died to water damage this weekend, so as flimsy as the kick stand is, it's alright in my books.
It'd be great if you could feature the Dbrand grip case in your future Samsung-related videos as I think it's one of the few cases with individual cutouts for the camera lens on the back, but anyway, love your video, man.
@@tobeeabee7650The S24 ultra does not support magsafe and it's not designed for it. All "magsafe" cases will interfere with not just the s-pen but the phone's other components as well.
You did a great job reviewing such a large number of phone cases, thank you for that! I don't know about others, but I noticed two impersonal things that might be worth improving in future reviews. First, for some reason you weigh the cases with gram precision, but peel off the protective films after weighing, not before. It would be more logical to do the opposite. Also, it might be worth considering that you often put the phone in the cases incorrectly, i.e. you should first insert the side of the phone with the buttons and only then press the other side, but you often do the opposite. These are a few humble suggestions of mine for what could be improved in phone case reviews. Thank you!
I have a Whitestone Dome clear case. The reason I got it was that I like the design with round camera cut-outs, not a P-shaped opening like other cases, That design just looks better to me. The main downside is that it does not have a kick-stand.
Personal Favorite: 02:01:10 Samsung Standing Grip Case I don't have to worry about it slipping out of my hand, or falling out of my hand, due to the strap and silicone friction Only con is that it collects dust at the cameras, idk if that is normal for other cases. Another con/pro (depends on how you see it) is that, it's kinda harder to take out of the pocket due to the silicone friction, but that is also a pro, because it's harder to steal / or just slide out of the pocket while sitting down somewhere or on the train/bus. (Speaking from experience, my old smooth/slippery case phone slid out once on a party, slid out once in a bus and fell behind my seat, through the side gap)
Excellent round up of all the cases!! great work. One question though.. dont suppose you tested the S-Pen with all the magsafe cases? I hear cases like the ESR one you recommend have a magnet thats too strong and it affects the S-Pen operation. Thats a bit of a bummer.
Most magsafe cases, if not all, will affect s-pen functionality. I got tired of returning "faulty" cases and decided to rip out the magnets of my last case and just use it as such.
Pitaka products have never let me down. I bought their S24ultra phone case, which has side exposure design, which allows me to feel the phone better, and it looks very stylish. A++
Your video of the Best & Worst Screen Protectors for the S24 Ultra brought me here. Excellent reviews sir. I actually sat and watched the entire lineup in both videos and was quite entertained. You've earned my subscription. 👍🏼👌🏼🤝
Which style of case is best to use for s24 ultra the base folio case which has almost a 7 shape cut out for the cameras or the style like the pitaka magez case 4 which I assume doesn't allow for camera lens covers? As the cameras are basically fully covered.
I have the Ringkl Matt clear case, onyx and Benks air and pro cases. Love the Benks Air case, use it as a daily driver at home and work, on weekends or when I go somewhere out I use the Benks Pro case of added protection.
Massive and most impressive search for best phone cases. Thank you. I have questions about Motive waterproof case N60. How heavy is the case? And also is it convenient to use the wired headphones with that case?
I own the S23U, not the 24. The best case i own for it is Spigen Cryo Armor. The best screen protector is a Spigen with UV adhesive, very similar with WhiteStone Dome, in fact a colab with them. The best accessory for it and for S24U is a Neewer polarization ring. I also got Buds2Pro and Watch6Classic LTE 47mm but if id own the S24U id wait for newer versions!
*_Literally the ultimate case review… Had every case I thought of 😳 I'll be upgrading from the base s21 to the 24 Ultra! Definitely going with the Mous case for me 👀🫦👀_* The Amr Fiberz is what I currently have equipped on my s21 & I'll be getting it again for the s24! Awesome video man 👏🏽
I used the Caseborne Exteme Rugged case, which was not reviewed. It seems to be a great durable case, and very durable. The only thing that I would change is that I wish the rear had more comfortable materials, but that is it. It's just hard plastic. On my other phone, I used the Supcase Unicorn Beetle, which seems to have comparable durability.
Crazy 3 hour video.. But of all the videos, without a doubt the most complete, and thanks to your video I confidently chose exactly the case I wanted with my criteria, thank you very much. And without a doubt, when I buy another phone, I will go to your channel to choose the case. 😁
Is there a case as protective as the SupCase or IBlason where you can use a glass screen protector instead of the provided plastic one? Can it be swapped out? Thanks for the comprehensive review! Wish the Magsafe cases were separated...
Wow, appreciate your thorough reviews of many of the cases I was looking at. It definitely helped me avoid spending too much money on cases I've been curious about. Also, glad we both agree Benks Armour Air is the best minimal case (bought before your video). Waiting for Belemay leather case to be released in early April, hope you review that one too. Overall, great job!
I was waiting for the 'worst' cases but sadly there were none..another advice for your future videos is i hope you can try ALL cases with a lens protector and tempered glass/screen protector.. would be good to see how the cases fit with those additional protection. I know you had 1 or 2 cases with the lens protector that you had installed but would be good to see how all cases fare with those additional protectors on them.
The Samsung soft silicone one is horrible, my gf had on her s23 ultra and in a few months it was starting to fall apart at the edges and looks like shit lol
@@adrnik19 yeah totally agree. I am using a matte 'hard' plastic protector that uses UV to cure the glue (not sure the name, i bring it to a shop to install it). Feels so much better than the gummy silicone protectors that i have used before this..
The ring turns for portrait as well on the Samsung gadget case. Push in and turn to the right past the marker. Those are the only two positions. The ring is slightly big for my small hands but it works if I position the phone accordingly. It feels great in the hand but with use the newest fingerprint zone! It picks up all the oils and prints and stays smudgey. It's still the one I'm using for now. I also have the Spigen Optik Armour. That's a great case as well, feels good in the hand. Looking for a grip ring to add that will stay attached to the textured back now.
The MagBak case features an inventive design, allowing the S Pen to operate seamlessly while connected to MagSafe products. Additionally, it incorporates extra magnets, enabling it to adhere to any metallic surface.
I really appreciate what you do. You have no idea how much you help with these kind of videos. It might look like something simple but you have saved me so much stress I appreciate it and I hope the best for you. Thank you ❤
I was thinking of buying the spigen liquid air. Why did you rule it out for the summary of the best? it is bad? I like the texture it has to prevent it from skidding. Will that plot be useful or will it be a collection of dust and dirt?
I bought one of your TOP 3 protectors. "Gatatol 9H Glass"! My fingerprint does not work as you showed on your video. Why is that? I even tried resetting it and I'm not even able to do that because it doesn't recognize my print. No matter how many attempts I've made it won't even sync my print. Can you explain?
Awesome case review. I loved the Benks Case but thought it felt a little slick ... I ended up with the UAG Monarch Pro though. Even though it's expensive, I like knowing it's protected. I might get the Thinborne case ... Even though it won't be as protected, I'll be able to feel the actual phone.
Thanks for the Code for Benks, ordered Montage ArmorPro Mous would be cooler, but visually this empty part near camera's ruining it for me, sadly - this gel sounds realy cool
Hi, you are doing an awesome job.. but i have a question.. on the right side of your phone..below the power button.. what is that oval shape in your frame ? my phone don't have such thing..can be a fingerprint sensor ?
Nice and detailed work!....it triggers me that half of these just barely protect the sides of the display. Why do case manufacturers do Samsung devices this way the display isnt curved anymore so why skimp on screen protection
i wanna ask u question , ON l-Blason & Supcases they have that ring on thire screen protector & i don't use the finger print feather , the ring there u can see it well? always shows when u watching movies & play with phone? is stands out like sore thumb there on screen in ur eyes? u can see it well
Nice video, thanks! Samsung doesnt use magnets in their cases, because magnets will interfere with using the stylus. You as expert reviewer should have known this😀. Try using the stylus with a magnetic grip/holder on a few of those magnetic cases you reviewed ....
I got the IBlasson case for my S24 Ultra, it's awesome, complete protection including camera lenses. Had one for my Note 4 which has only just been retired for the Ultra. Just outdated now for apps, still working fine though. I doubt you'll find a better case than IBlasson. Let me know if you think you have..
Damn i made it thru. Fast forwarded a few 10 seconds at a time with P shaped cutout cases 😂 i like them individually cut out. All in all i think ill go with Banks Aramid Fiber slim one. Camera cut out not quite individual but not P shaped. Ill have to see and feel it in person. Thanks for putting this together!
A 3 hour video for cases. Imagine what this man does for all accessories for 1 model of a phone. Nice one.
It's pretty worth it given that I'm gonna use the phone for atleast 7 years and I plan on only changing the battery and cable throughout its life.
Thank you for your attention and support.
😂1
For anyone confused about the Samsung case, the reason why it has no magnet is that magnets disrupt the S-Pen, preventing it from working
Yea, but it is while charging right ?
Thanks for providing us the Snyder Cut version of S24 Case... Much appreciated
Does everyone have to make a Snyder cut comment here now bc of Floss 🙄
yep
@@SofaKingA
😮8h ❤❤❤❤❤❤❤❤😮@@SofaKingA😮⁹
1iiiji@@SofaKingA
😊
Can't believe I'm watching 3 hours of cases for a phone.
Only thing with those on-screen cases is that it brings back all the reflections.
😂 we love our ultras I bought the one terabyte and paid a fortune. I switch from apple
aint no way u lot watched 3 whole hours of this‼
Been skipping through here and there on the esr flick stand case which is on my s24 ultra currently lol
I tried and fell asleep 😂
:3c
Nah I just skipped to the end to see the thin but very protective ones and went back to watch a review on it in this video
Is any of these MagSafe cases safe from interfering with S Pen precision?
ones that only have a steel plate. magnet free
If they have a built-in magnet, they interfere. I have one, and it makes spaces wine I write.
Also, most are weak magnets, only strong enough to attach a wireless charger, not for a stand, wallet, or car mount. Pretty crappy.
3 hour review and zero mention of S-Pen interference. Probably just wants that affiliate money.
@@nigel-uno While I can't speak to that, I will say that some of the top picks seem to get pretty bad reviews. Are they mostly good, sure, but there are enough really bad experiences that I have to question how helpful this video actually is. On Amazon, checking the Motive store, I see no Life Proof case, but they do have a Bunker series, which they claim is their toughest case. Upon checking, out of 29 ratings, 22% gave a one star review. If that's their best case, I have strong doubts about the others. Looking at several other cases listed in the video as top picks, I'm not that impressed. Included face covers tend to suck and not allow fingerprint ID. Many do not include actual protection for the camera lenses. The video covered a lot of ground, so I give the creator credit for all the work put in. I just can't say I'd rely on the suggestions at the end.
2:35:20 About that kickstand case. The metal kickstand makes the case (and the phone) top heavy. It feels much heavier in hand when you hold the phone by the lower part
Maan, I bought about 10. cases for the S24U most of them going back. Out of all of them the Torras cases are the best ones. The fit is so perfect where you won't see the titanium frame peeking out like most of the cases I bought . I feel like a lot of these manufacturers used a S23U mold and every body just copied and pasted it.Its seems like they were meant to protect the side rails of a curved screen . Because most of these cases I bought the sides are lower than the screen and the titanium side frame peeks out and it's not even through out
I don't know what material Torras uses, if it's TPU or not but it's also the most dense and hard material out of all cases I bought.
Another major worthy mention is the Torras diamond shield screen protector. The finger print scanner works absolutely flawlessly. it works exactly as if there isn't a screen protector on there . Same exact pressure is needed if there is the Torras screen protector on it or not.
This is a long review but it's exactly what we needed because there are too many cases to research. Thanks!
Does the spen has any problem with the Torras may I ask?
@@quang6474 not with the magnet on the case it self with no magsafe accessory attached to it. Now depending on the strength magnet of the accessory you are attaching to ( magsafe wallet , car mount) you will get interference using the spen. So no just with the case it self with the magnetic halo ring it does affect the use of the spen.
th-cam.com/video/o7fLBKKBsA8/w-d-xo.htmlsi=gDPM_RVeUgTgN_Xz
@@DoritosResiduethank you sir!
So torres cases have actual raised side lip ???
Ive sent so many cases back because of this issue
Amazing. I had dbrand previously and tried the Ringke Fusion bold with the clear frosted back. The added grip on the sides along with the frosted back that shows off the titanium blue while keeping smudges to nearly 0 is a win. Really appreciate this video!
Thanks for your thorough and informative reviews. Is the screen protector that comes with the Poetic Spartan as protective from cracking as 9H glass? Or would you recommend getting a separate screen protector? THANKS!!
Curious, did you have the lens protectors and tempered glass screen protectors on for all cases?
Thank you
th-cam.com/video/o7fLBKKBsA8/w-d-xo.htmlsi=gDPM_RVeUgTgN_Xz
Great video. I checked every single link, sorted by desired colors, then went back to your reviews. Got the slimmer of the Poetic series in bright orange. Thanks for the great compilation!
Yoooooo! Big shout out for the work you put in and the time stamps! Got a follower for that. Link those wireless mag safe chargers you have.
2:15:25 Had the Spigen Tough Armour on my S20+ since launch day, phone survived many nasty falls. Back of case got a crack, and it still protected very well. Phone died to water damage this weekend, so as flimsy as the kick stand is, it's alright in my books.
It'd be great if you could feature the Dbrand grip case in your future Samsung-related videos as I think it's one of the few cases with individual cutouts for the camera lens on the back, but anyway, love your video, man.
They're on backorder
Why does no one cut individual holes? Too lazy?
Very
Ok@@nathancasey7712
@21:33 Do you think the Base Folio Wallet would interfere with S-Pen performances? Specially if it is connected with the folio base?
Can someone please put a commert to answer this person's p
Question
@@tobeeabee7650The S24 ultra does not support magsafe and it's not designed for it. All "magsafe" cases will interfere with not just the s-pen but the phone's other components as well.
I was waiting for that review, but I did not expect 60 cases tested 😲 Brilliant work
You did a great job reviewing such a large number of phone cases, thank you for that! I don't know about others, but I noticed two impersonal things that might be worth improving in future reviews. First, for some reason you weigh the cases with gram precision, but peel off the protective films after weighing, not before. It would be more logical to do the opposite. Also, it might be worth considering that you often put the phone in the cases incorrectly, i.e. you should first insert the side of the phone with the buttons and only then press the other side, but you often do the opposite. These are a few humble suggestions of mine for what could be improved in phone case reviews. Thank you!
Those magsafe rings affects the S pen sensitivity?
By far this was the most practical and informative video on phone case I've ever seen! Thank you so much for it.
I have a Whitestone Dome clear case. The reason I got it was that I like the design with round camera cut-outs, not a P-shaped opening like other cases, That design just looks better to me. The main downside is that it does not have a kick-stand.
I got the spigen ultra hybrid s, its clear, has individual cutouts and a kickstand
i love it
Do you feel it protects the lenses? Do you use lense protectors? @@NepetaLeijon
Any colored cases? That are good
Personal Favorite:
02:01:10 Samsung Standing Grip Case
I don't have to worry about it slipping out of my hand, or falling out of my hand, due to the strap and silicone friction
Only con is that it collects dust at the cameras, idk if that is normal for other cases.
Another con/pro (depends on how you see it) is that, it's kinda harder to take out of the pocket due to the silicone friction, but that is also a pro, because it's harder to steal / or just slide out of the pocket while sitting down somewhere or on the train/bus.
(Speaking from experience, my old smooth/slippery case phone slid out once on a party, slid out once in a bus and fell behind my seat, through the side gap)
09:21 Best case I would say, probably not the safest, but beautiful and simple.
Excellent round up of all the cases!! great work. One question though.. dont suppose you tested the S-Pen with all the magsafe cases? I hear cases like the ESR one you recommend have a magnet thats too strong and it affects the S-Pen operation. Thats a bit of a bummer.
Most magsafe cases, if not all, will affect s-pen functionality. I got tired of returning "faulty" cases and decided to rip out the magnets of my last case and just use it as such.
Which case is best for me if I want slimmest possible transparent case? I don't mind minimal protection as long as it covers the back.
exhaustive research. well worth a like and subscribe. thank you for helping us make informed choices.
Doesn't mention cons or flaws of cases. It is not an exhaustive review. An exhaustive review would have tested S-Pen interference.
Pitaka products have never let me down. I bought their S24ultra phone case, which has side exposure design, which allows me to feel the phone better, and it looks very stylish. A++
Magsafe cases interfering with s pen, only while charging right ?
Your video of the Best & Worst Screen Protectors for the S24 Ultra brought me here. Excellent reviews sir. I actually sat and watched the entire lineup in both videos and was quite entertained. You've earned my subscription. 👍🏼👌🏼🤝
Which style of case is best to use for s24 ultra the base folio case which has almost a 7 shape cut out for the cameras or the style like the pitaka magez case 4 which I assume doesn't allow for camera lens covers? As the cameras are basically fully covered.
I have the Ringkl Matt clear case, onyx and Benks air and pro cases.
Love the Benks Air case, use it as a daily driver at home and work, on weekends or when I go somewhere out I use the Benks Pro case of added protection.
Does the Benks Air offer a scratch free protection from drops or is not suitable for that?
Thank you this was very helpful, just ordered the ESR flick stand case using your link
Massive and most impressive search for best phone cases. Thank you. I have questions about Motive waterproof case N60. How heavy is the case? And also is it convenient to use the wired headphones with that case?
I own the S23U, not the 24.
The best case i own for it is Spigen Cryo Armor.
The best screen protector is a Spigen with UV adhesive, very similar with WhiteStone Dome, in fact a colab with them. The best accessory for it and for S24U is a Neewer polarization ring.
I also got Buds2Pro and Watch6Classic LTE 47mm but if id own the S24U id wait for newer versions!
Can all the other cases that have magsafe stick to any metal surfaces like the first one from Torras?
Your wallpapers looked up where do you get them?
Would help a lot more if you could talk about the heat dissipation as well!
Great video. Thanks for taking the time to do this. It was extremely helpful
Hi please tell me what company is the mag safe power bank black one wchich You use on video. Thanks
what screen protector r u using please .
It would be nice to know if the cases that have built-in screen protector are made of glass or plastic.
I wish I could get the Ringke Onyx case at 35:45 with the camera cutout of the Otterbox Symmetry at 2:40:48
My man did it again. An absolute blockbuster of cases. I love watching it, even if I don’t got a S24 Ultra 😂
Thank you for your support!
@@HighTechCheck 💪🏼
*_Literally the ultimate case review… Had every case I thought of 😳 I'll be upgrading from the base s21 to the 24 Ultra! Definitely going with the Mous case for me 👀🫦👀_* The Amr Fiberz is what I currently have equipped on my s21 & I'll be getting it again for the s24! Awesome video man 👏🏽
Do any of the "everyday cases" (3:04:25) have magsafe?
I used the Caseborne Exteme Rugged case, which was not reviewed. It seems to be a great durable case, and very durable.
The only thing that I would change is that I wish the rear had more comfortable materials, but that is it. It's just hard plastic.
On my other phone, I used the Supcase Unicorn Beetle, which seems to have comparable durability.
For a case must have: Lanyard hole at the left side. Only a few cases offer that, Ringke always does it!
2:51:33 this case is great... for the first few monthes. After that the fingerprint becomes completely unuseable and the audio is awful
I just got the Ringke Onyx Magnet Black for my S24U and liked it so much I immedialty got it for my 15 Pro Max and Pixel 8.
Just amazing how thorough and extensive this is!
Amazing video mate! New subscriber!!! ❤🎉
Crazy 3 hour video.. But of all the videos, without a doubt the most complete, and thanks to your video I confidently chose exactly the case I wanted with my criteria, thank you very much. And without a doubt, when I buy another phone, I will go to your channel to choose the case. 😁
Is there a case as protective as the SupCase or IBlason where you can use a glass screen protector instead of the provided plastic one? Can it be swapped out? Thanks for the comprehensive review! Wish the Magsafe cases were separated...
I used an X-acto knife and cut the plastic screen protector and used glass screen protector. It worked like a charm.
Wow, man! That's some serious effort you put in. Good job! ❤
Wow, appreciate your thorough reviews of many of the cases I was looking at. It definitely helped me avoid spending too much money on cases I've been curious about. Also, glad we both agree Benks Armour Air is the best minimal case (bought before your video).
Waiting for Belemay leather case to be released in early April, hope you review that one too.
Overall, great job!
I was waiting for the 'worst' cases but sadly there were none..another advice for your future videos is i hope you can try ALL cases with a lens protector and tempered glass/screen protector.. would be good to see how the cases fit with those additional protection. I know you had 1 or 2 cases with the lens protector that you had installed but would be good to see how all cases fare with those additional protectors on them.
The Samsung soft silicone one is horrible, my gf had on her s23 ultra and in a few months it was starting to fall apart at the edges and looks like shit lol
@@adrnik19 yeah totally agree. I am using a matte 'hard' plastic protector that uses UV to cure the glue (not sure the name, i bring it to a shop to install it). Feels so much better than the gummy silicone protectors that i have used before this..
@hightechcheck Great video! Of the Ringke Fusion X/Bold cases, which has the LEAST "slippery" back? Camo, Clear, or Clear Matte?
Wow! You made me a subscribe to your channel! Awesome review!
Thank you!
best thing about this video is "He does not show his face" which is kinda rare these days.
I love this guy.
The ring turns for portrait as well on the Samsung gadget case. Push in and turn to the right past the marker. Those are the only two positions. The ring is slightly big for my small hands but it works if I position the phone accordingly. It feels great in the hand but with use the newest fingerprint zone! It picks up all the oils and prints and stays smudgey. It's still the one I'm using for now. I also have the Spigen Optik Armour. That's a great case as well, feels good in the hand. Looking for a grip ring to add that will stay attached to the textured back now.
The MagBak case features an inventive design, allowing the S Pen to operate seamlessly while connected to MagSafe products. Additionally, it incorporates extra magnets, enabling it to adhere to any metallic surface.
Big thanks for measuring the weight of each case! 80% manufacters don't provide that info
I really appreciate what you do. You have no idea how much you help with these kind of videos. It might look like something simple but you have saved me so much stress I appreciate it and I hope the best for you. Thank you ❤
Can you please add S-pen compatability on your next testing. Thanks for your hard work!
I had the very first #1 case and the #5 case on the list before even seeing the video 🙌🏾 definitely agree
I appreciate your hard effort to bring us reviews for all those cases! Keep it up your hard work.
How do you rate the drop protection on UAG vs Spigen cases?
The definitive guide to s24u cases 👏🏻👏🏻👏🏻
Dude. Thank you for this super detailed comparison. I am buying a black and blue I-Blason Armorbox on Amazon prime right now. 😃 😀
Hi I could not find the Supcase UB with the nice back design. It is the green one at 3:09? Do you have the link for it?
Have you come across any decent ultra thin cases that are clear? Kind of like the Mous but clear? Or the Thinborne?
I love the dedication. You've gained a subscriber.
which is the best temper glass for it with easy fingerprint accessible
Which one of the lightweight aramid fiber cases provides the most secure grip (least slippery) in your opinion?
Thank you sir, this was fun. I truly appreciate your service!
I was thinking of buying the spigen liquid air. Why did you rule it out for the summary of the best? it is bad? I like the texture it has to prevent it from skidding. Will that plot be useful or will it be a collection of dust and dirt?
Just get the Tough Armor instead.
May I ask why you didn’t review any Castify cases ??
Id love to know if these cases are avail for the S24+
I bought one of your TOP 3 protectors. "Gatatol 9H Glass"! My fingerprint does not work as you showed on your video. Why is that? I even tried resetting it and I'm not even able to do that because it doesn't recognize my print. No matter how many attempts I've made it won't even sync my print. Can you explain?
Best video ever made for case . love for your effort 🎉❤❤❤
This deserves a huge thumb up for the length of the footage alone 👍🏻👍🏻👍🏻
Thank you for your support!
@@HighTechCheck Thank you for that gargantuan review 👏🏻👏🏻👏🏻
Awesome case review. I loved the Benks Case but thought it felt a little slick ... I ended up with the UAG Monarch Pro though. Even though it's expensive, I like knowing it's protected. I might get the Thinborne case ... Even though it won't be as protected, I'll be able to feel the actual phone.
Thank you for this. Please consider protector edge durability and if a case covers the gap from screen protector
The spigen Enzo leaves no gap between my glass ESR screen protector.
@@JohnSmith-ef8nr thanks for letting me know
How about the video sound is it the same? Thank you
Thanks for the Code for Benks, ordered Montage ArmorPro
Mous would be cooler, but visually this empty part near camera's ruining it for me, sadly - this gel sounds realy cool
Which magsafe cases don't interfere with the S Pen when using magnetic accessories?
Hi, you are doing an awesome job.. but i have a question.. on the right side of your phone..below the power button.. what is that oval shape in your frame ? my phone don't have such thing..can be a fingerprint sensor ?
It’s the 5G antenna
Wow! Wow! Spectacular work! Congratulations!
Can anyone provide me the link for the powerbank mentioned in the beginning..?
Thanks, I found my perfect case - Torras Ostand- not available in Australia, so I purchased it from the USA. 😊
Do you ever have trouble writing on the screen? I'm thinking about getting that case, but I'm worried the S Pen might not work well.
Nice and detailed work!....it triggers me that half of these just barely protect the sides of the display. Why do case manufacturers do Samsung devices this way the display isnt curved anymore so why skimp on screen protection
Does torras Upro Ostand Spin Magnetic case interferes with s pen writing...?
You mentioned Mous 5.0 limitless having great drop protection. Did you test the Clarity 2.0? Wondering of it has same drop protection?
i wanna ask u question , ON l-Blason & Supcases they have that ring on thire screen protector & i don't use the finger print feather , the ring there u can see it well? always shows when u watching movies & play with phone? is stands out like sore thumb there on screen in ur eyes? u can see it well
Hey, I appreciate all your efforts. Thanks a million
Nice video, thanks!
Samsung doesnt use magnets in their cases, because magnets will interfere with using the stylus. You as expert reviewer should have known this😀. Try using the stylus with a magnetic grip/holder on a few of those magnetic cases you reviewed ....
Amazing video!!!
You're by far the best person doing case and screen protector reviews 🎉🙌🏽🙏🏽 thank you sir for everything you do!! 😁
I got the IBlasson case for my S24 Ultra, it's awesome, complete protection including camera lenses. Had one for my Note 4 which has only just been retired for the Ultra. Just outdated now for apps, still working fine though.
I doubt you'll find a better case than IBlasson. Let me know if you think you have..
Damn i made it thru. Fast forwarded a few 10 seconds at a time with P shaped cutout cases 😂 i like them individually cut out. All in all i think ill go with Banks Aramid Fiber slim one. Camera cut out not quite individual but not P shaped. Ill have to see and feel it in person. Thanks for putting this together!
Awesome video!